Component guide · Advanced · 5 min read
Absolute Industrial Encoders

Hengstler AC58 Optical SSI and Parallel (0566003 to 0574412) and Pepperl+Fuchs ENA36TL IO-Link Singleturn and Multiturn, Solid and Hollow Shaft
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
An absolute encoder reports the actual shaft angle as a number, so it knows its position right after power-up with no homing run. The Hengstler AC58 is a 58mm optical encoder with SSI or parallel binary output. The Pepperl+Fuchs ENA36TL is a compact 36mm encoder that talks IO-Link, so a PLC IO-Link master reads position and settings over three wires.
Key specs at a glance
- Size
- 58mm (AC58), 36mm (ENA36TL)
- Interfaces
- SSI or parallel (AC58), IO-Link V1.1 (ENA36)
- Resolution
- Up to 16 bit singleturn; multiturn models count turns too
- Supply
- 10-30V DC (AC58), 18-30V DC (ENA36)
- Shafts
- 6 or 10mm solid, 6mm hollow (ENA36 R06)
- Protection
- IP64 to IP67
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Hengstler AC58 Series 0566003 Absolute Rotary Encoder – Optical, Binary Output, Horizontal, IP64₹1,47,959
Option 2Hengstler AC58 Series 0566005 Optical Absolute Rotary Encoder – Horizontal, 0 Detents, IP64₹1,50,569
Option 3Hengstler AC58 Series 0566077 Absolute Rotary Encoder – Optical, Binary Output, IP67, Flange Mount₹1,58,299
Option 4Hengstler AC58 Series 0566140 Optical Absolute Rotary Encoder – Binary Output, IP64, Flange Mount₹1,30,889
Option 5Hengstler AC58 Series 0566174 Absolute Rotary Encoder – Optical, Horizontal, IP64, 10-30VDC₹1,58,339
Option 6Hengstler AC58 Series 0566543 Absolute Rotary Encoder, Optical, Horizontal, Flange Mount₹1,37,579
What the Hengstler AC58 and Pepperl+Fuchs ENA36 IO-Link absolute encoders is
An absolute encoder reports the shaft's real angle as a digital number at every moment, so a machine knows its position immediately after power-up.
Use absolute encoders on cranes, gates, antenna and solar trackers, valves and machine axes where losing position after a power cut is not acceptable. Singleturn models repeat every revolution; multiturn models (the 1516 code on ENA36) also count whole turns.
ENA36 needs an IO-Link master (a PLC card or an IO-Link USB master) on a standard M12 cable. AC58 SSI models need a clock and data line driver pair (RS422); a MAX485 or AM26LS31/32 pair and a microcontroller can read SSI, but an industrial SSI input is simpler.
Hengstler AC58 and Pepperl+Fuchs ENA36 IO-Link absolute encoders pinout
The pins on the Hengstler AC58 and Pepperl+Fuchs ENA36 IO-Link absolute encoders and what each one does.
| Pin | Function |
|---|---|
| +V | 10-30V DC |
| 0V | Ground |
| SSI Clock+ / Clock- | From the controller (AC58 SSI) |
| SSI Data+ / Data- | To the controller (AC58 SSI) |
| C/Q | IO-Link data line (ENA36, M12 pin 4) |
- +V
- 10-30V DC
- 0V
- Ground
- SSI Clock+ / Clock-
- From the controller (AC58 SSI)
- SSI Data+ / Data-
- To the controller (AC58 SSI)
- C/Q
- IO-Link data line (ENA36, M12 pin 4)
Wiring the Hengstler AC58 and Pepperl+Fuchs ENA36 IO-Link absolute encoders
Import the IODD file for ENA36 into the IO-Link master tool to name the position and setting values.
| Hengstler AC58 and Pepperl+Fuchs ENA36 IO-Link absolute encoders pin | Connection | Note |
|---|---|---|
| ENA36 pin 1 | L+ 24V | IO-Link master |
| ENA36 pin 3 | L- 0V | IO-Link master |
| ENA36 pin 4 | C/Q | IO-Link master |
| AC58 Clock / Data | RS422 pair | Twisted pair, shielded |
- ENA36 pin 1
- Connection:
- L+ 24V
- Note:
- IO-Link master
- ENA36 pin 3
- Connection:
- L- 0V
- Note:
- IO-Link master
- ENA36 pin 4
- Connection:
- C/Q
- Note:
- IO-Link master
- AC58 Clock / Data
- Connection:
- RS422 pair
- Note:
- Twisted pair, shielded
Example code
Set BITS and the code type (binary or Gray) from your AC58 part number. Many SSI encoders send Gray code, which must be converted.
const int CLK = 5; // to RS422 driver, then Clock+/-
const int DATA = 6; // from RS422 receiver, Data+/-
const int BITS = 13;
unsigned long readSSI() {
unsigned long v = 0;
for (int i = 0; i < BITS; i++) {
digitalWrite(CLK, LOW); delayMicroseconds(2);
digitalWrite(CLK, HIGH); delayMicroseconds(2);
v = (v << 1) | digitalRead(DATA);
}
delayMicroseconds(30); // monoflop time before the next frame
return v;
}
void setup() { Serial.begin(115200); pinMode(CLK, OUTPUT); digitalWrite(CLK, HIGH); pinMode(DATA, INPUT); }
void loop() {
unsigned long pos = readSSI(); // Gray or binary per model
Serial.println(pos * 360.0 / (1UL << BITS), 2);
delay(100);
}Setup and tuning
power from 10 to 30 V DC (AC58) or 18 to 30 V DC (ENA36), the same rail as the PLC inputs.
use twisted-pair shielded cable for clock and data, and ground the shield at one end.
set the SSI frame length and Gray or binary coding in the receiver to match the encoder's part number.
use a flexible coupling on solid shafts so misalignment does not load the bearings.
set the zero position in the PLC or with the encoder's preset input after mounting, not by rotating the housing.
What you need
Shop this list17 of 18 found in our store · ₹18,05,691
Hengstler AC58 Series 0566003 Absolute Rotary Encoder – Optical, Binary Output, Horizontal, IP64: the part this guide coversHengstler AC58 Series 0566003 Absolute Rotary Encoder – Optical, Binary Output, Horizontal, IP64₹1,47,959
Hengstler AC58 Series 0566005 Optical Absolute Rotary Encoder – Horizontal, 0 Detents, IP64: another version this guide coversHengstler AC58 Series 0566005 Optical Absolute Rotary Encoder – Horizontal, 0 Detents, IP64₹1,50,569
Hengstler AC58 Series 0566077 Absolute Rotary Encoder – Optical, Binary Output, IP67, Flange Mount: another version this guide coversHengstler AC58 Series 0566077 Absolute Rotary Encoder – Optical, Binary Output, IP67, Flange Mount₹1,58,299
Hengstler AC58 Series 0566140 Optical Absolute Rotary Encoder – Binary Output, IP64, Flange Mount: another version this guide coversHengstler AC58 Series 0566140 Optical Absolute Rotary Encoder – Binary Output, IP64, Flange Mount₹1,30,889
Hengstler AC58 Series 0566174 Absolute Rotary Encoder – Optical, Horizontal, IP64, 10-30VDC: another version this guide coversHengstler AC58 Series 0566174 Absolute Rotary Encoder – Optical, Horizontal, IP64, 10-30VDC₹1,58,339
Hengstler AC58 Series 0566543 Absolute Rotary Encoder, Optical, Horizontal, Flange Mount: another version this guide coversHengstler AC58 Series 0566543 Absolute Rotary Encoder, Optical, Horizontal, Flange Mount₹1,37,579
Hengstler AC58 Series 0574329 Absolute Optical Rotary Encoder – 0 Detents, Horizontal, IP64/IP65, Binary Output: another version this guide coversHengstler AC58 Series 0574329 Absolute Optical Rotary Encoder – 0 Detents, Horizontal, IP64/IP65, Binary Output₹1,53,549
Hengstler AC58 Series 0574412 Optical Absolute Rotary Encoder – Horizontal, Flange Mount, IP64/IP65: another version this guide coversHengstler AC58 Series 0574412 Optical Absolute Rotary Encoder – Horizontal, Flange Mount, IP64/IP65₹1,50,679
Pepperl+Fuchs ENA36TL-R06DA5-0016-IO-RBD01 Absolute Rotary Encoder – IO-Link V1.1, 12000 RPM, 6mm Hollow Shaft, IP65/IP67: another version this guide coversPepperl+Fuchs ENA36TL-R06DA5-0016-IO-RBD01 Absolute Rotary Encoder – IO-Link V1.1, 12000 RPM, 6mm Hollow Shaft, IP65/IP67₹78,949
Pepperl+Fuchs ENA36TL-R06DA5-1516-IO-RBD01 Absolute Rotary Encoder – IO-Link, Hollow Shaft Ø6mm, IP65/IP67: another version this guide coversPepperl+Fuchs ENA36TL-R06DA5-1516-IO-RBD01 Absolute Rotary Encoder – IO-Link, Hollow Shaft Ø6mm, IP65/IP67₹81,199
Pepperl+Fuchs ENA36TL-S06SA5-0016-IO-ABD01 Absolute Rotary Encoder – IO-Link, IP65, 6mm Shaft: another version this guide coversPepperl+Fuchs ENA36TL-S06SA5-0016-IO-ABD01 Absolute Rotary Encoder – IO-Link, IP65, 6mm Shaft₹68,669
Pepperl+Fuchs ENA36TL-S06SA5-0016-IO-RBD01 Absolute Rotary Encoder – IO-Link, 16-bit, 12000 RPM, IP65, 6mm Shaft: another version this guide coversPepperl+Fuchs ENA36TL-S06SA5-0016-IO-RBD01 Absolute Rotary Encoder – IO-Link, 16-bit, 12000 RPM, IP65, 6mm Shaft₹77,589
Pepperl+Fuchs ENA36TL-S06SA5-1516-IO-RBD01 Absolute Rotary Encoder, 18-30V DC, 6mm Shaft, 12000 RPM, IO-Link V1.1, IP65: another version this guide coversPepperl+Fuchs ENA36TL-S06SA5-1516-IO-RBD01 Absolute Rotary Encoder, 18-30V DC, 6mm Shaft, 12000 RPM, IO-Link V1.1, IP65₹79,969
Pepperl+Fuchs ENA36TL-S10SA5-0016-IO-ABD01 Absolute Rotary Encoder, IO-Link, 12000 RPM, 18-30V DC, Diam-10mm: another version this guide coversPepperl+Fuchs ENA36TL-S10SA5-0016-IO-ABD01 Absolute Rotary Encoder, IO-Link, 12000 RPM, 18-30V DC, Diam-10mm₹73,719
Pepperl+Fuchs ENA36TL-S10SA5-0016-IO-RBD01 Absolute Rotary Encoder, IO-Link, Flange Mount, 12000 RPM, 18-30V DC, 10mm Shaft: another version this guide coversPepperl+Fuchs ENA36TL-S10SA5-0016-IO-RBD01 Absolute Rotary Encoder, IO-Link, Flange Mount, 12000 RPM, 18-30V DC, 10mm Shaft₹77,589
Pepperl+Fuchs ENA36TL-S10SA5-1516-IO-RBD01 Absolute Rotary Encoder, 10mm Shaft, IO-Link V1.1, IP65: another version this guide coversPepperl+Fuchs ENA36TL-S10SA5-1516-IO-RBD01 Absolute Rotary Encoder, 10mm Shaft, IO-Link V1.1, IP65₹79,969- 24V switching power supply board: to power 12-24V industrial encoders on the benchFind this part
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- Industrial incremental encoders: pulse output.
- Magnetic angle encoders: small absolute chips.
- Optical and absolute encoders: basics.
Common mistakes to avoid
- Using unshielded cable for SSI over long runs, which corrupts the data.
- Decoding Gray code as binary, so the position jumps.
- Coupling the shaft rigidly, which wears out the encoder bearings.
- Connecting 24 V encoder outputs straight to 3.3 V logic.
Frequently asked questions
What is the difference between absolute and incremental encoders?
An incremental encoder counts pulses and loses position at power-off. An absolute encoder always reports the actual position.
Can I read an SSI encoder with an Arduino or ESP32?
Yes, with an RS422 receiver chip and code that clocks out the bits, as long as the logic levels are converted correctly.
What does multiturn mean?
A multiturn encoder also counts full revolutions, so it reports position over many turns, not just within one.
What is IO-Link?
IO-Link is a point-to-point industrial link over a standard three-wire sensor cable, read by an IO-Link master on a PLC.
Why do the readings jump near some angles?
Usually Gray versus binary coding is set wrongly in the receiver, or the SSI clock is too fast for the cable length.
Parts for this guide
- ₹1,47,959View
- ₹1,50,569View
- ₹1,58,299View
- ₹1,30,889View
- ₹1,58,339View
- ₹1,37,579View
Hengstler AC58 Series 0574329 Absolute Optical Rotary Encoder – 0 Detents, Horizontal, IP64/IP65, Binary Output₹1,53,549View- ₹1,50,679View
Pepperl+Fuchs ENA36TL-R06DA5-0016-IO-RBD01 Absolute Rotary Encoder – IO-Link V1.1, 12000 RPM, 6mm Hollow Shaft, IP65/IP67₹78,949View
Pepperl+Fuchs ENA36TL-R06DA5-1516-IO-RBD01 Absolute Rotary Encoder – IO-Link, Hollow Shaft Ø6mm, IP65/IP67₹81,199View- ₹68,669View
Pepperl+Fuchs ENA36TL-S06SA5-0016-IO-RBD01 Absolute Rotary Encoder – IO-Link, 16-bit, 12000 RPM, IP65, 6mm Shaft₹77,589View
Pepperl+Fuchs ENA36TL-S06SA5-1516-IO-RBD01 Absolute Rotary Encoder, 18-30V DC, 6mm Shaft, 12000 RPM, IO-Link V1.1, IP65₹79,969View
Pepperl+Fuchs ENA36TL-S10SA5-0016-IO-ABD01 Absolute Rotary Encoder, IO-Link, 12000 RPM, 18-30V DC, Diam-10mm₹73,719View
Pepperl+Fuchs ENA36TL-S10SA5-0016-IO-RBD01 Absolute Rotary Encoder, IO-Link, Flange Mount, 12000 RPM, 18-30V DC, 10mm Shaft₹77,589View- ₹79,969View
- ₹411View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

