Component guide · Intermediate · 4 min read
Bosch Accelerometers

BMA400, BMA456, BMA423, BMA425, BMA280, BMA255, BMA253, BMA222, BMA220, BMA150, SMB380, BMC150
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Bosch's BMA accelerometers are tiny 3-axis sensors for wearables and battery devices. The BMA400 draws only a few microamps and wakes the system on motion; the BMA456, BMA423 and BMA425 count steps and recognise activity in hardware; the BMA2xx parts are older general-purpose chips. The BMC150 adds a magnetometer for an e-compass. Seeed's Grove BMA456 board makes testing easy.
Key specs at a glance
- Range
- ±2 to ±16 g (most)
- Resolution
- 8 to 16 bit depending on part
- Power
- As low as about 3.5 µA (BMA400 low-power mode)
- Interface
- I2C or SPI
- Supply
- 1.62 to 3.6 V (chips); Grove 3.3 or 5 V
- Features
- Step counter (BMA456/423/425), wake on motion, tap, orientation
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Bosch BMA400 Ultra-Low Power 3-Axis Accelerometer, ±2/±4/±8/±16g, I²C/SPI, –40°C~85°C₹249
Option 2Bosch BMA456 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power 14µA, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹409
Option 3Seeed Studio Grove BMA456 Step Counter Module – I2C Interface, ±2g/±4g/±8g/±16g Range₹1,129
Option 4Bosch BMA423 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹519
Option 5Bosch BMA425 3-Axis Accelerometer, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹209
Option 6Bosch BMA280 3-Axis Accelerometer Sensor, ±16g Range, 14-bit Resolution, Low Power, I²C/SPI, LGA-12 Package₹459
What the Bosch BMA400, BMA456 and BMA2xx accelerometers is
Bosch BMA accelerometers are tiny low-power 3-axis motion sensors used in wearables and IoT devices for tilt, step counting and wake-on-motion.
Use the interrupts: set a motion threshold, put the microcontroller to sleep, and let the accelerometer wake it. That is how fitness bands last weeks on a coin cell.
Most of these are bare LGA chips; the Grove BMA456 is the one ready-made board in this list.
Bosch BMA400, BMA456 and BMA2xx accelerometers pinout
The pins on the Bosch BMA400, BMA456 and BMA2xx accelerometers and what each one does.
| Pin | Function |
|---|---|
| VDD / VDDIO | Supply |
| GND | Ground |
| SCL / SDA | I2C (SPI on same pins) |
| SDO | Address select or SPI MISO |
| CSB | SPI chip select |
| INT1 / INT2 | Motion and step interrupts |
- VDD / VDDIO
- Supply
- GND
- Ground
- SCL / SDA
- I2C (SPI on same pins)
- SDO
- Address select or SPI MISO
- CSB
- SPI chip select
- INT1 / INT2
- Motion and step interrupts
Wiring the Bosch BMA400, BMA456 and BMA2xx accelerometers
Modules with a regulator run from 3.3 V or 5 V. Bare chips (LGA or QFN parts) are 1.8 to 3.6 V only: mount them on a breakout and use a level shifter with 5 V boards.
| Bosch BMA400, BMA456 and BMA2xx accelerometers pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5V (or 3.3V) | 3V3 |
| GND | GND | GND |
| SDA | A4 | GPIO 21 |
| SCL | A5 | GPIO 22 |
- VCC
- Arduino Uno:
- 5V (or 3.3V)
- ESP32:
- 3V3
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SDA
- Arduino Uno:
- A4
- ESP32:
- GPIO 21
- SCL
- Arduino Uno:
- A5
- ESP32:
- GPIO 22
Example code
Use Seeed's Grove BMA456 library for the step counter, or Bosch's SensorAPI for other parts.
#include <SparkFun_BMA400_Arduino_Library.h>
BMA400 accel;
void setup() {
Serial.begin(115200);
Wire.begin();
while (accel.beginI2C(0x14) != BMA400_OK) { Serial.println("BMA400 not found"); delay(1000); }
}
void loop() {
accel.getSensorData();
Serial.printf("x %.2f g y %.2f g z %.2f g\n", accel.data.accelX, accel.data.accelY, accel.data.accelZ);
delay(100);
}Setup and tuning
BMA400 for ultra-low power, BMA456 and BMA423 for step counting, BMA280 and BMA250 for general use.
check the I2C address and connect SPI or I2C as the board is wired.
set ±2 g for tilt, higher ranges for impacts.
use the motion and tap interrupts to wake the host instead of polling.
bare chips are small LGA packages that need reflow; use a breakout for prototypes.
What you need
Shop this list15 of 16 found in our store · ₹4,760
Bosch BMA400 Ultra-Low Power 3-Axis Accelerometer, ±2/±4/±8/±16g, I²C/SPI, –40°C~85°C: the part this guide coversBosch BMA400 Ultra-Low Power 3-Axis Accelerometer, ±2/±4/±8/±16g, I²C/SPI, –40°C~85°C₹249
Bosch BMA456 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power 14µA, Step Counter & Activity Recognition, I²C/SPI, LGA-12: another version this guide coversBosch BMA456 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power 14µA, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹409
Seeed Studio Studio Grove BMA456 Step Counter Module – I2C Interface, ±2g/±4g/±8g/±16g Range: another version this guide coversSeeed Studio Grove BMA456 Step Counter Module – I2C Interface, ±2g/±4g/±8g/±16g Range₹1,129
Bosch BMA423 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12: another version this guide coversBosch BMA423 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹519
Bosch BMA425 3-Axis Accelerometer, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12: another version this guide coversBosch BMA425 3-Axis Accelerometer, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹209
Bosch BMA280 3-Axis Accelerometer Sensor, ±16g Range, 14-bit Resolution, Low Power, I²C/SPI, LGA-12 Package: another version this guide coversBosch BMA280 3-Axis Accelerometer Sensor, ±16g Range, 14-bit Resolution, Low Power, I²C/SPI, LGA-12 Package₹459
Bosch BMA255 3-Axis Accelerometer, ±2/4/8/16g, Low Power, 12-bit Resolution, I²C/SPI, 2.4~3.6V, LGA-12: another version this guide coversBosch BMA255 3-Axis Accelerometer, ±2/4/8/16g, Low Power, 12-bit Resolution, I²C/SPI, 2.4~3.6V, LGA-12₹207
Bosch Sensortec BMA253 LGA-12 3-Axis Accelerometer ROHS: another version this guide coversBosch Sensortec BMA253 LGA-12 3-Axis Accelerometer ROHS₹151
Bosch BMA222 3-Axis Digital Accelerometer, I²C/SPI, ±2/4/8g, Ultra-Low Power MEMS Sensor: another version this guide coversBosch BMA222 3-Axis Digital Accelerometer, I²C/SPI, ±2/4/8g, Ultra-Low Power MEMS Sensor₹94
Bosch BMA220 3-Axis Digital Accelerometer, I²C/SPI, ±2/4/8g, Ultra-Low Power MEMS Sensor: another version this guide coversBosch BMA220 3-Axis Digital Accelerometer, I²C/SPI, ±2/4/8g, Ultra-Low Power MEMS Sensor₹104
Bosch BMA150 3-Axis Digital Accelerometer Module – I²C/SPI Interface, ±2/4/8g Range: another version this guide coversBosch BMA150 3-Axis Digital Accelerometer Module – I²C/SPI Interface, ±2/4/8g Range₹105
Bosch SMB380 3-Axis Accelerometer Sensor, ±2/±4/±8g, <200µA Low Power, SPI/I²C, 3×3mm QFN, Temperature Output: another version this guide coversBosch SMB380 3-Axis Accelerometer Sensor, ±2/±4/±8g, <200µA Low Power, SPI/I²C, 3×3mm QFN, Temperature Output₹409
Bosch BMC150 6-Axis Sensor (Accelerometer + Magnetometer), ±2/4/8/16g, I²C/SPI, 1.62~3.6V, LGA: another version this guide coversBosch BMC150 6-Axis Sensor (Accelerometer + Magnetometer), ±2/4/8/16g, I²C/SPI, 1.62~3.6V, LGA₹158
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389- Uno R3 development board: the controller used in the wiring tableFind this part
GY-521 MPU6050 6-axis module: the classic low-cost IMUGY-521 MPU6050 6-Axis Gyro and Accelerometer Module₹169Closest match, check the specs
Alternatives and when to choose them
Common mistakes to avoid
- Hand-soldering an LGA chip and leaving pads unconnected.
- Polling all the time instead of using interrupts.
- Using a high g range for tilt and losing resolution.
- Using code for one BMA part on a different one.
Frequently asked questions
Which BMA chip uses the least power?
The BMA400 is designed for ultra-low power, ideal for coin-cell devices.
Can these chips count steps?
Yes. The BMA456, BMA423 and BMA425 have built-in step counters.
Do I need a library?
Bosch provides drivers; for Arduino, look for libraries for the exact part number.
Can I solder the chip by hand?
Not reliably. They are LGA packages; use a breakout board or reflow soldering.
What range should I set?
±2 g for tilt and gentle motion; ±8 g or ±16 g for shocks.
Parts for this guide
- ₹249View
Bosch BMA456 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power 14µA, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹409View- ₹1,129View
Bosch BMA423 3-Axis Accelerometer Sensor, ±16g, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹519View
Bosch BMA425 3-Axis Accelerometer, Ultra-Low Power, Step Counter & Activity Recognition, I²C/SPI, LGA-12₹209View
Bosch BMA280 3-Axis Accelerometer Sensor, ±16g Range, 14-bit Resolution, Low Power, I²C/SPI, LGA-12 Package₹459View
Bosch BMA255 3-Axis Accelerometer, ±2/4/8/16g, Low Power, 12-bit Resolution, I²C/SPI, 2.4~3.6V, LGA-12₹207View- ₹151View
- ₹94View
- ₹104View
- ₹105View
Bosch SMB380 3-Axis Accelerometer Sensor, ±2/±4/±8g, <200µA Low Power, SPI/I²C, 3×3mm QFN, Temperature Output₹409View- ₹158View
- ₹389View
- ₹359View
- ₹169View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

