Component guide · Intermediate · 5 min read
ESP32 and RP2350 Ethernet and Industrial Boards

WT32-ETH01, ESP32-Ethernet-Kit, LilyGO T-ETH-Lite, T-POE Pro, T-CAN485, T-RSS3 and T-Vending, Waveshare ESP32-S3 8-Ch Industrial Board, Seeed EdgeBox-ESP-100, ESP Thread Border Router, Cytron IRIV-IOC, RP2350-ETH, W55RP20 and RP2350 CAN
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These boards put Ethernet, PoE, RS485 or CAN on an ESP32 or RP2350 for reliable wired IoT. WT32-ETH01 and LilyGO T-ETH boards use LAN8720 or W5500 Ethernet. T-POE Pro and the Vacus module take power over the Ethernet cable. T-CAN485, T-RSS3 and the Waveshare ESP32-S3 industrial board add isolated RS485, CAN and relays. EdgeBox-ESP-100 and Cytron IRIV-IOC are cased controllers for panels.
Key specs at a glance
- Ethernet
- LAN8720 or IP101 RMII PHY on ESP32; W5500 SPI on S3 and RP2350 boards; W55RP20 combines both
- PoE
- 802.3af on T-POE Pro, Vacus, ESP32-Ethernet-Kit
- Fieldbus
- RS485, RS232, CAN on T-CAN485, T-RSS3, Waveshare industrial board
- I/O
- Relays and digital inputs on industrial boards
- Software
- Arduino ETH library, ESPHome, ESP-IDF, MicroPython
- Power
- 5V USB, 7-36V DC or PoE
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Espressif ESP32-Ethernet-Kit-VE Development Board w/ PoE₹6,299
Option 2LilyGO T-CAN485 ESP32 CAN RS-485 IoT Control Module₹2,099
Option 3LilyGO T-ETH-Lite ESP32-S3 W5500 Ethernet Dev Board w/ TF Card & POE Shield₹2,729
Option 4LilyGO T-POE Pro ESP32-WROVER-E Ethernet RS485 PoE Expansion Board₹5,249
Option 5LilyGO T-RSS3 ESP32-S3 Development Board w/ RS232 & RS485 5V Module₹3,359
Option 6LilyGO T-Vending ESP32-S3 IoT Dev Board w/ WiFi, Bluetooth, RS485 & PCIe₹3,149
What the ESP32 and RP2350 Ethernet, PoE, RS485 and CAN boards is
ESP32 Ethernet and industrial I/O boards such as the WT32-ETH01, Olimex ESP32-POE and Kincony-style controllers add wired LAN, relays, isolated inputs and RS485 to an ESP32.
Use Ethernet where Wi-Fi is unreliable, for example inside metal panels. With ESPHome, a WT32-ETH01 becomes a wired Home Assistant node in a few lines of YAML. The ESP Thread Border Router board bridges Thread and Zigbee devices to Wi-Fi or Ethernet for Matter.
On LAN8720 boards the PHY's clock pin (GPIO0 or GPIO17) matters: copy the board's exact settings, or Ethernet will not start.
ESP32 and RP2350 Ethernet, PoE, RS485 and CAN boards pinout
The pins on the ESP32 and RP2350 Ethernet, PoE, RS485 and CAN boards and what each one does.
| Pin | Function |
|---|---|
| Ethernet RJ45 | 10/100 Mbit, some with PoE |
| RS485 | A, B, GND terminals |
| CAN | CANH, CANL |
| GPIO header | 3.3V logic |
| Power input | USB, DC terminal or PoE |
- Ethernet RJ45
- 10/100 Mbit, some with PoE
- RS485
- A, B, GND terminals
- CAN
- CANH, CANL
- GPIO header
- 3.3V logic
- Power input
- USB, DC terminal or PoE
Wiring the ESP32 and RP2350 Ethernet, PoE, RS485 and CAN boards
Never feed USB and DC power at the same time unless the board allows it. Use isolated RS485 for long cable runs between buildings.
| ESP32 and RP2350 Ethernet, PoE, RS485 and CAN boards pin | Connection | Note |
|---|---|---|
| Ethernet | Cable to switch or PoE switch | PoE only on PoE boards |
| RS485 | A to A, B to B | Terminate the ends |
| Programming | USB or USB-UART on GPIO1/3 | WT32-ETH01 needs a USB-UART |
- Ethernet
- Connection:
- Cable to switch or PoE switch
- Note:
- PoE only on PoE boards
- RS485
- Connection:
- A to A, B to B
- Note:
- Terminate the ends
- Programming
- Connection:
- USB or USB-UART on GPIO1/3
- Note:
- WT32-ETH01 needs a USB-UART
Example code
These pins are for WT32-ETH01. Other boards use different PHY pins and clock modes: copy the maker's values.
esphome:
name: panel-node
esp32:
board: esp32dev
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO0_IN
phy_addr: 1
power_pin: GPIO16
api:
logger:
ota:
- platform: esphome
sensor:
- platform: uptime
name: "Panel node uptime"Setup and tuning
call ETH.begin() with the PHY type (LAN8720 or similar), address and clock pin that match your board.
use the stated input (5 V, 12 to 24 V or PoE); never feed USB and PoE on non-isolated boards at the same time.
isolated inputs expect 12 or 24 V signals; check the common terminal wiring.
check contact ratings; relays switching mains must sit in a closed enclosure.
wire A to A and B to B and add a 120 Ω terminator at the line ends.
What you need
Shop this list19 of 20 found in our store · ₹84,946
Espressif ESP32-Ethernet-Kit-VE Development Board w/ PoE: the part this guide coversEspressif ESP32-Ethernet-Kit-VE Development Board w/ PoE₹6,299
LilyGO T-CAN485 ESP32 CAN RS-485 IoT Control Module: another version this guide coversLilyGO T-CAN485 ESP32 CAN RS-485 IoT Control Module₹2,099
LilyGO T-ETH-Lite ESP32-S3 W5500 Ethernet Dev Board w/ TF Card & POE Shield: another version this guide coversLilyGO T-ETH-Lite ESP32-S3 W5500 Ethernet Dev Board w/ TF Card & POE Shield₹2,729
LilyGO T-POE Pro ESP32-WROVER-E Ethernet RS485 PoE Expansion Board: another version this guide coversLilyGO T-POE Pro ESP32-WROVER-E Ethernet RS485 PoE Expansion Board₹5,249
LilyGO T-RSS3 ESP32-S3 Development Board w/ RS232 & RS485 5V Module: another version this guide coversLilyGO T-RSS3 ESP32-S3 Development Board w/ RS232 & RS485 5V Module₹3,359
LilyGO T-Vending ESP32-S3 IoT Dev Board w/ WiFi, Bluetooth, RS485 & PCIe: another version this guide coversLilyGO T-Vending ESP32-S3 IoT Dev Board w/ WiFi, Bluetooth, RS485 & PCIe₹3,149
Vacus ESP32-LAN8720 PoE-R1 Module w/ IEEE 802.3af: another version this guide coversVacus ESP32-LAN8720 PoE-R1 Module w/ IEEE 802.3af₹8,113
WT32-ETH01 Serial to Ethernet Gateway Module w/ Wi-Fi & Bluetooth: another version this guide coversWT32-ETH01 Serial to Ethernet Gateway Module w/ Wi-Fi & Bluetooth₹1,719
Wireless-Tag WT32-ETH01 EVO ESP32-C3 WiFi BLE Ethernet Gateway Module: another version this guide coversWireless-Tag WT32-ETH01 EVO ESP32-C3 WiFi BLE Ethernet Gateway Module₹1,619
Waveshare Industrial ESP32-S3 Control Board w/ 8-Channel I/O, RS485, CAN, ETH, PoE: another version this guide coversWaveshare Industrial ESP32-S3 Control Board w/ 8-Channel I/O, RS485, CAN, ETH, PoE₹5,459
Seeed EdgeBox-ESP-100 Industrial Edge Controller: another version this guide coversSeeed EdgeBox-ESP-100 Industrial Edge Controller₹20,700
Elecrow eBus Adapter Shield C6 with Enclosure: another version this guide coversElecrow eBus Adapter Shield C6 with Enclosure₹4,599
Espressif ESP Thread BR-Zigbee GW Development Board: another version this guide coversEspressif ESP Thread BR-Zigbee GW Development Board₹1,302
SEDAC Lite Modbus Gateway WiFi 5V DC w/ LoRa & Wi-Fi Antennas: another version this guide coversSEDAC Lite Modbus Gateway WiFi 5V DC w/ LoRa & Wi-Fi Antennas₹7,363
Cytron IRIV-IOC RP2350 Industrial I/O Controller: another version this guide coversCytron IRIV-IOC RP2350 Industrial I/O Controller₹6,659
Waveshare RP2350-ETH Mini Development Board w/ Ethernet: another version this guide coversWaveshare RP2350-ETH Mini Development Board w/ Ethernet₹1,409
WIZnet W55RP20-EVB-PICO Evaluation Board: another version this guide coversWIZnet W55RP20-EVB-PICO Evaluation Board₹1,846
Waveshare RP2350 CAN Development Board w/ XL2515 CAN Controller: another version this guide coversWaveshare RP2350 CAN Development Board w/ XL2515 CAN Controller₹1,189
USB to TTL serial converter: to talk to the module from a PCUSB to TTL Serial Converter (CH340G / CP2102 / FT232RL / PL2303)₹85Closest match, check the specs- USB to RS485 converter: to test Modbus devices from a PCFind this part
Alternatives and when to choose them
- W5500 Ethernet: add Ethernet to any board.
- Modbus RTU with Arduino and ESP32: RS485 code.
- CAN-BUS MCP2515: CAN basics.
Common mistakes to avoid
- Wrong PHY settings in the Ethernet code.
- Connecting USB and non-isolated PoE together.
- Switching mains on relays without an enclosure.
- Leaving RS485 lines without termination on long runs.
Frequently asked questions
Why does Ethernet not start on my WT32-ETH01?
The PHY address, type or clock pin in ETH.begin() does not match the board.
Can I use Wi-Fi and Ethernet together?
Yes, both can be active, but choose one as the main route.
Is it safe to connect USB while using PoE?
Only on boards with isolated PoE; otherwise ground loops can damage the PC or board.
Can these boards run ESPHome or Tasmota?
Yes. Most popular ones have ready ESPHome or Tasmota configs.
What voltage do the inputs accept?
Industrial boards usually take 12 to 24 V on isolated inputs; check the label.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

