Concept explainer · Advanced · 3 min read
FPGA Boards for Beginners
By Geekobot Learning Team · Updated 24 Oct 2026
On this page
An FPGA is a chip full of configurable logic blocks and wiring that you program to become a custom digital circuit. Instead of running instructions one after another like a microcontroller, everything you describe runs in parallel hardware. You write the design in a hardware description language such as Verilog or VHDL, and tools turn it into a bitstream. Beginner boards include Lattice iCE40, Gowin Tang Nano and AMD Artix-7 boards.
Key specs at a glance
- Building blocks
- Look-up tables (LUTs), flip-flops, block RAM, DSP slices, I/O
- Languages
- Verilog, SystemVerilog, VHDL; also Amaranth, SpinalHDL
- Configuration
- Volatile; loaded from SPI flash at power-up
- Beginner chips
- Lattice iCE40 (open-source tools), Gowin GW1N (Tang Nano), AMD Artix-7 (Vivado)
- I/O voltage
- Usually 3.3 V or lower; not 5 V tolerant
- Good for
- Parallel, precise timing: video, high-speed interfaces, signal processing
FPGA vs microcontroller
| Microcontroller | FPGA | |
|---|---|---|
| How it works | CPU runs instructions in sequence | Logic you design runs in parallel |
| Timing | Microseconds, affected by interrupts | Nanoseconds, deterministic |
| Language | C, C++, MicroPython | Verilog, VHDL |
| Learning curve | Gentle | Steep: think in hardware |
| Power and cost | Low | Higher |
| Best for | Most projects | Video, many fast I/O, custom protocols, DSP |
- How it works
- Microcontroller:
- CPU runs instructions in sequence
- FPGA:
- Logic you design runs in parallel
- Timing
- Microcontroller:
- Microseconds, affected by interrupts
- FPGA:
- Nanoseconds, deterministic
- Language
- Microcontroller:
- C, C++, MicroPython
- FPGA:
- Verilog, VHDL
- Learning curve
- Microcontroller:
- Gentle
- FPGA:
- Steep: think in hardware
- Power and cost
- Microcontroller:
- Low
- FPGA:
- Higher
- Best for
- Microcontroller:
- Most projects
- FPGA:
- Video, many fast I/O, custom protocols, DSP
Beginner boards and tools
small and fully supported by the open-source Yosys, nextpnr and icestorm tools, ideal for learning.
very low cost, HDMI output, Gowin's free IDE plus growing open-source support.
university standard with switches, LEDs and seven-segment displays; uses the free Vivado edition.
Many boards include a RISC-V soft CPU example, showing that you can build a microcontroller inside the FPGA.
First projects
- 1Blink an LED with a counter dividing the board clock.
- 2Debounce buttons and drive a seven-segment display with multiplexing.
- 3Build a UART transmitter and talk to your PC (see UART).
- 4Generate VGA or HDMI video with a moving pattern.
- 5Drive WS2812B LEDs with exact timing.
Learning logic gates and simulating designs with a testbench before loading them saves many hours.
Try it: Frequency wavelength calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Writing Verilog like sequential C code.
- Skipping simulation and debugging on hardware only.
- Connecting 5 V signals to FPGA pins.
- Forgetting timing constraints for clocks.
- Choosing a large, expensive board before learning the basics.
Frequently asked questions
Should a beginner learn FPGA or microcontroller first?
Microcontroller first. FPGAs make more sense once you understand digital logic and why you need parallel, precise timing.
Verilog or VHDL?
Either works. Verilog is more common in hobby and industry examples; VHDL is common in Europe and some universities.
What is the cheapest FPGA board to start with?
Gowin-based Tang Nano boards and small iCE40 boards are among the cheapest.
Can an FPGA run Arduino code?
Not directly. You can load a soft processor into the FPGA and run C on it, but the FPGA itself is configured with HDL.
Is an FPGA faster than a microcontroller?
For tasks that run in parallel or need precise timing, yes. For general code, a microcontroller is simpler and often fast enough.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
- Lattice iCE40 family datasheet
- AMD Artix-7 FPGA documentation
- YosysHQ open-source FPGA toolchain documentation
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



