Component guide · Beginner · 6 min read
GoldenMorning and Generic SPI TFT LCD Modules

0.96 to 3.97 Inch ST7735, ST7789, ILI9341, ILI9225 and ST7701 Screens for Arduino and ESP32
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are small SPI colour screens from 0.96 to 3.97 inch. The controller chip named in the title (ST7735, ST7789, ILI9341, ILI9225 or ST7701) decides which library and init values you use. Wire VCC, GND and five signal pins, set the right size, and draw text with the Adafruit GFX or TFT_eSPI library.
Key specs at a glance
- Sizes
- 0.96 to 3.97 inch
- Controllers
- ST7735, ST7789, ILI9341, ILI9225, ST7701
- Interface
- SPI, 8 to 13 pin FPC or header
- Resolution
- 128x128 up to 480x800
- Logic
- 3.3 V
- Extras
- Touch and SD card on selected models
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 11.44 inch TFT LCD Color Screen Module SPI Interface₹446
Option 22.0 Inch SPI TFT LCD Color Screen Module ILI9225 Serial Interface 176 x 220₹675
Option 33.2 inch TFT LCD Screen Module₹1,252
Option 42.2 inch 240*320 LCD color screen TFT SPI serial interface module compatible with 5110₹715
Option 5GoldenMorning 1.8 Inch Full Color TN Non-Touch LCD Module₹466
Option 6GoldenMorning 2.4 Inch ST7789 TN LCD Touch Display Panel₹685
What the GoldenMorning and generic SPI TFT LCD modules (ST7735, ST7789, ILI9341, ILI9225) is
Each module is a TFT or IPS panel with its controller and a pin header or flexible cable. The first thing to read in a listing is the controller, because the library, rotation and offsets all depend on it. A 128x160 ST7735S, a 240x240 ST7789 and a 240x320 ILI9341 each need different init values, but the wiring is nearly identical.
Models marked Touch add a capacitive or resistive touch controller on a second interface, and models with SD card support add a separate SD slot on the same SPI bus. The 3.97 inch ST7701 panel is a larger RGB-style display; read its listing for the interface before ordering.
GoldenMorning and generic SPI TFT LCD modules (ST7735, ST7789, ILI9341, ILI9225) pinout
The pins on the GoldenMorning and generic SPI TFT LCD modules (ST7735, ST7789, ILI9341, ILI9225) and what each one does.
| Pin | Function |
|---|---|
| VCC | Power, normally 3.3 V |
| GND | Ground |
| SCL / SCK | SPI clock |
| SDA / MOSI | SPI data in |
| RES | Reset |
| DC | Data or command select |
| CS | Chip select |
| BL | Backlight on, or PWM to dim |
- VCC
- Power, normally 3.3 V
- GND
- Ground
- SCL / SCK
- SPI clock
- SDA / MOSI
- SPI data in
- RES
- Reset
- DC
- Data or command select
- CS
- Chip select
- BL
- Backlight on, or PWM to dim
Wiring the GoldenMorning and generic SPI TFT LCD modules (ST7735, ST7789, ILI9341, ILI9225)
Pin names vary; match SCL to clock and SDA to data. Use a level shifter or resistor divider on an Uno.
| GoldenMorning and generic SPI TFT LCD modules (ST7735, ST7789, ILI9341, ILI9225) pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 3.3V (5V only if the module has a regulator) | 3V3 |
| GND | GND | GND |
| SCL / SCK | D13 | GPIO 18 |
| SDA / MOSI | D11 | GPIO 23 |
| RES / RST | D8 | GPIO 4 |
| DC | D9 | GPIO 2 |
| CS | D10 | GPIO 5 |
| BL / LED | 3.3V (or a PWM pin to dim) | 3V3 or GPIO 15 |
- VCC
- Arduino Uno:
- 3.3V (5V only if the module has a regulator)
- ESP32:
- 3V3
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SCL / SCK
- Arduino Uno:
- D13
- ESP32:
- GPIO 18
- SDA / MOSI
- Arduino Uno:
- D11
- ESP32:
- GPIO 23
- RES / RST
- Arduino Uno:
- D8
- ESP32:
- GPIO 4
- DC
- Arduino Uno:
- D9
- ESP32:
- GPIO 2
- CS
- Arduino Uno:
- D10
- ESP32:
- GPIO 5
- BL / LED
- Arduino Uno:
- 3.3V (or a PWM pin to dim)
- ESP32:
- 3V3 or GPIO 15
Example code
Change the library and init() call to match your controller: Adafruit_ST7735 for ST7735 panels, Adafruit_ILI9341 for ILI9341.
#include <Adafruit_GFX.h>
#include <Adafruit_ST7789.h>
#include <SPI.h>
#define TFT_CS 10
#define TFT_DC 9
#define TFT_RST 8
Adafruit_ST7789 tft = Adafruit_ST7789(TFT_CS, TFT_DC, TFT_RST);
void setup() {
tft.init(240, 320); // set your panel size here
tft.setRotation(1);
tft.fillScreen(ST77XX_BLACK);
tft.setTextColor(ST77XX_WHITE);
tft.setTextSize(2);
tft.setCursor(10, 10);
tft.println("Hello Geekobot");
}
void loop() {}Setup and tuning
read it from the title; it decides the library and the init call.
some panels need a pixel offset; if the image is shifted, adjust the column and row start.
use 3.3 V signals; add a level shifter on 5 V boards.
touch and SD use extra pins and a separate chip select; wire them after the display works.
What you need
Shop this list20 of 20 found in our store · ₹11,499
1.44 inch TFT LCD Color Screen Module SPI Interface: the part this guide covers1.44 inch TFT LCD Color Screen Module SPI Interface₹446
2.0 Inch SPI TFT LCD Color Screen Module ILI9225 Serial Interface 176 x 220: another version this guide covers2.0 Inch SPI TFT LCD Color Screen Module ILI9225 Serial Interface 176 x 220₹675
3.2 inch TFT LCD Screen Module: another version this guide covers3.2 inch TFT LCD Screen Module₹1,252
2.2 inch 240320 LCD color screen TFT SPI serial interface module compatible with 5110: another version this guide covers2.2 inch 240*320 LCD color screen TFT SPI serial interface module compatible with 5110₹715
GoldenMorning 1.8 Inch Full Color TN Non-Touch LCD Module: another version this guide coversGoldenMorning 1.8 Inch Full Color TN Non-Touch LCD Module₹466
GoldenMorning 2.4 Inch ST7789 TN LCD Touch Display Panel: another version this guide coversGoldenMorning 2.4 Inch ST7789 TN LCD Touch Display Panel₹685
GoldenMorning 3.5 Inch TFT LCD Display Panel: another version this guide coversGoldenMorning 3.5 Inch TFT LCD Display Panel₹1,163
GoldenMorning 2.8 Inch TFT LCD Non-Touch display module(SD card support): another version this guide coversGoldenMorning 2.8 Inch TFT LCD Non-Touch display module(SD card support)₹675
GoldenMorning Full Color ST7789V 12P 240X280 SPI 1.69 inch TFT LCD display: another version this guide coversGoldenMorning Full Color ST7789V 12P 240X280 SPI 1.69 inch TFT LCD display₹297
GoldenMorning ST7735S 8P 128X160 SPI 1.77 inch TFT display module: another version this guide coversGoldenMorning ST7735S 8P 128X160 SPI 1.77 inch TFT display module₹387
GoldenMorning ST7789T3 240X240 SPI 1.54inch TFT display: another version this guide coversGoldenMorning ST7789T3 240X240 SPI 1.54inch TFT display₹247
GoldenMorning SPI 1.14 Inch Screen 135x240 Resolution 13Pins TFT LCD Display: another version this guide coversGoldenMorning SPI 1.14 Inch Screen 135x240 Resolution 13Pins TFT LCD Display₹217
0.96 Inch Full Color Non-Touch TFT LCD Module: another version this guide covers0.96 Inch Full Color Non-Touch TFT LCD Module₹245
GoldenMorning 2.0 inch TFT display 240×320 ST7789VW GMT020-01: another version this guide coversGoldenMorning 2.0 inch TFT display 240×320 ST7789VW GMT020-01₹307
2.8 inch LCM TFT Color Screen ILI9341V with SPI Serial Port: another version this guide covers2.8 inch LCM TFT Color Screen ILI9341V with SPI Serial Port₹1,063
GoldenMorning 1.8 inch TFT Module 128X160 ST7735S: another version this guide coversGoldenMorning 1.8 inch TFT Module 128X160 ST7735S₹416
GoldenMorning 1.44 inch TFT Module 128×128 ST7735S: another version this guide coversGoldenMorning 1.44 inch TFT Module 128×128 ST7735S₹207
GoldenMorning 1.9 inch TFT Display 170×320 ST7789: another version this guide coversGoldenMorning 1.9 inch TFT Display 170×320 ST7789₹287
GoldenMorning 3.2 inch TFT Display 240×320 ST7789V: another version this guide coversGoldenMorning 3.2 inch TFT Display 240×320 ST7789V₹795
GoldenMorning 3.97 inch TFT Display 480×800 ST7701: another version this guide coversGoldenMorning 3.97 inch TFT Display 480×800 ST7701₹954
Alternatives and when to choose them
- ST7789 displays: the common 240x240 and 240x320 IPS controller.
- ILI9341 TFT displays: larger touch-ready panels.
- SSD1306 OLED displays: simpler monochrome option.
Common mistakes to avoid
- Choosing a library for the wrong controller.
- Driving 3.3 V pins with 5 V logic.
- Ignoring pixel offsets on small panels.
- Sharing the SPI chip select between display and SD.
Frequently asked questions
How do I know which library to use?
Read the controller name in the title and use its matching library.
Can I run these from 5 V?
Check the module; most have 3.3 V logic and need a level shifter on an Uno.
Why is my image shifted?
Some panels need a column or row offset set in the library.
Do these include touch?
Only the models that say Touch in the title do.
What is the difference between TN and IPS?
IPS has wider viewing angles; TN is cheaper and narrower.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.










