Component guide · Intermediate · 5 min read
Barcode and QR Scanner Modules

Grow GM65, GM65-S, GM66, GM67, GM69, GM73, GM75, GM77, GM77-S, GM78, GM803-L, GM805-L, GM810-L, GM811-L, GM812-L, GM861, GM861S and GM861XS, MH-ET LIVE Scanner V3.0 and Waveshare Barcode Scanner Modules
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These modules read 1D barcodes and 2D codes such as QR from a camera, then send the text over UART or USB. Over USB they act like a keyboard and type the code. Over UART a microcontroller reads the code as a line of text. Grow models differ in size, range and mounting: GM65 and GM66 are common box modules, GM8xx-L are thin embedded engines, and GM861 is very small.
Key specs at a glance
- Codes
- EAN, UPC, Code 128, QR, Data Matrix, PDF417 and more
- Interfaces
- UART TTL and USB (keyboard or virtual COM)
- Default UART
- 9600 baud 8N1 on most
- Range
- About 5-50cm depending on model and code size
- Supply
- 3.3-5V, 100-200 mA when scanning
- Modes
- Manual trigger, continuous, sensing (auto when an object appears)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Grow GM65 1D/2D Barcode Scanner Module – USB & UART Interface₹3,057
Option 2Grow GM65 Barcode Scanner Module – USB2.0 & UART Interface₹2,999
Option 3Grow GM65-S Barcode Scanner Module – UART/USB Interface, 0.10mm Resolution₹2,019
Option 4Grow GM66 Barcode Scanner Module – USB2.0 & UART Interface₹2,999
Option 5Grow GM67 Barcode Scanner Module – USB2.0 & UART Interface₹2,999
Option 6Grow GM69 Barcode Scanner Module – USB2.0 & UART Interface₹4,089
What the Grow GM series, Waveshare and MH-ET LIVE barcode and QR scanner modules is
Grow GM series barcode scanner modules such as the GM65, GM66 and GM805 read 1D and 2D barcodes and QR codes and send the text over UART or USB.
Change settings by scanning the setup barcodes in the module's manual: USB keyboard, USB COM or UART output, sensing mode, adding a carriage return after each code, and so on. Start by scanning 'restore factory defaults'.
For a microcontroller, use UART mode and read characters until the carriage return. For a PC or Raspberry Pi kiosk, USB keyboard mode needs no code at all. Phone screens can be hard to read under bright light; lower the illumination or enable screen reading where available.
Grow GM series, Waveshare and MH-ET LIVE barcode and QR scanner modules pinout
The pins on the Grow GM series, Waveshare and MH-ET LIVE barcode and QR scanner modules and what each one does.
| Pin | Function |
|---|---|
| VCC | 3.3-5V |
| GND | Ground |
| TX | UART out to MCU RX |
| RX | UART in for commands |
| TRIG | Trigger input on some, active low |
- VCC
- 3.3-5V
- GND
- Ground
- TX
- UART out to MCU RX
- RX
- UART in for commands
- TRIG
- Trigger input on some, active low
Wiring the Grow GM series, Waveshare and MH-ET LIVE barcode and QR scanner modules
Check the connector pinout for your model; Grow modules use different 4, 6 or 12-pin cables.
| Grow GM series, Waveshare and MH-ET LIVE barcode and QR scanner modules pin | ESP32 | Note |
|---|---|---|
| Scanner TX | ESP32 GPIO16 (RX2) | 3.3V TTL |
| Scanner RX | ESP32 GPIO17 (TX2) | Optional |
| VCC | 5V | Peak current when the LED fires |
- Scanner TX
- ESP32:
- ESP32 GPIO16 (RX2)
- Note:
- 3.3V TTL
- Scanner RX
- ESP32:
- ESP32 GPIO17 (TX2)
- Note:
- Optional
- VCC
- ESP32:
- 5V
- Note:
- Peak current when the LED fires
Example code
Scan the 'add CR suffix' setup code if codes arrive without a line ending.
String code;
void setup() {
Serial.begin(115200);
Serial2.begin(9600, SERIAL_8N1, 16, 17); // RX, TX
}
void loop() {
while (Serial2.available()) {
char c = Serial2.read();
if (c == '\r' || c == '\n') {
if (code.length()) {
Serial.print("Scanned: ");
Serial.println(code);
code = "";
}
} else {
code += c;
}
}
}Setup and tuning
TX to the microcontroller RX, RX to TX, 5 V and GND; check if logic is 3.3 V or TTL.
the default is usually 9600; set it the same in your sketch.
set continuous, sensing or command trigger mode by scanning setup barcodes from the manual.
in USB HID mode it types like a keyboard on a PC.
read codes in even light and keep the code flat.
What you need
Shop this list20 of 20 found in our store · ₹50,298
Grow GM65 1D/2D Barcode Scanner Module – USB & UART Interface: the part this guide coversGrow GM65 1D/2D Barcode Scanner Module – USB & UART Interface₹3,057
Grow GM65 Barcode Scanner Module – USB2.0 & UART Interface: another version this guide coversGrow GM65 Barcode Scanner Module – USB2.0 & UART Interface₹2,999
Grow GM65-S Barcode Scanner Module – UART/USB Interface, 0.10mm Resolution: another version this guide coversGrow GM65-S Barcode Scanner Module – UART/USB Interface, 0.10mm Resolution₹2,019
Grow GM66 Barcode Scanner Module – USB2.0 & UART Interface: another version this guide coversGrow GM66 Barcode Scanner Module – USB2.0 & UART Interface₹2,999
Grow GM67 Barcode Scanner Module – USB2.0 & UART Interface: another version this guide coversGrow GM67 Barcode Scanner Module – USB2.0 & UART Interface₹2,999
Grow GM69 Barcode Scanner Module – USB2.0 & UART Interface: another version this guide coversGrow GM69 Barcode Scanner Module – USB2.0 & UART Interface₹4,089
Grow GM73 Barcode Scanner – USB & UART Interface: another version this guide coversGrow GM73 Barcode Scanner – USB & UART Interface₹3,379
Grow GM75 Barcode Scanner Module – USB & UART Interface, 30-550mm Depth of Field: another version this guide coversGrow GM75 Barcode Scanner Module – USB & UART Interface, 30-550mm Depth of Field₹2,889
Grow GM77 Barcode Scanner Module – USB 2.0 & UART Interface: another version this guide coversGrow GM77 Barcode Scanner Module – USB 2.0 & UART Interface₹3,529
Grow GM77-S Barcode Scanner Module – USB & UART Interface: another version this guide coversGrow GM77-S Barcode Scanner Module – USB & UART Interface₹2,999
Grow GM78 Barcode Scanner Module – 4mil CMOS Sensor, USB/UART Interface: another version this guide coversGrow GM78 Barcode Scanner Module – 4mil CMOS Sensor, USB/UART Interface₹3,649
Grow GM803-L Barcode Scanner Module – UART/USB Interface, 7-50cm Range: another version this guide coversGrow GM803-L Barcode Scanner Module – UART/USB Interface, 7-50cm Range₹1,119
Grow GM805-L Barcode Scanner Module – UART/USB Interface, 7-50cm Range: another version this guide coversGrow GM805-L Barcode Scanner Module – UART/USB Interface, 7-50cm Range₹1,239
Grow GM810-L Barcode Scanner Module – CMOS Sensor, UART/USB Interface, 7-50cm Range: another version this guide coversGrow GM810-L Barcode Scanner Module – CMOS Sensor, UART/USB Interface, 7-50cm Range₹2,419
Grow GM811-L Barcode Scanner Module – UART/USB Interface, 7-50cm Range: another version this guide coversGrow GM811-L Barcode Scanner Module – UART/USB Interface, 7-50cm Range₹2,099
Grow GM812-L Barcode Scanner Module – USB/UART Interface, 7-50cm Range: another version this guide coversGrow GM812-L Barcode Scanner Module – USB/UART Interface, 7-50cm Range₹2,099
Grow GM861 Barcode Scanner Module – UART/USB Interface, CMOS Sensor: another version this guide coversGrow GM861 Barcode Scanner Module – UART/USB Interface, CMOS Sensor₹1,599
Grow GM861S Barcode Scanner Module – UART/USB Interface, 5-30cm Range: another version this guide coversGrow GM861S Barcode Scanner Module – UART/USB Interface, 5-30cm Range₹1,599
Grow GM861XS Barcode Scanner Module – UART/USB Interface, CMOS Sensor: another version this guide coversGrow GM861XS Barcode Scanner Module – UART/USB Interface, CMOS Sensor₹1,339
Scanner V3.0 Barcode Scan Recognition Module – USB/UART Interface: another version this guide coversScanner V3.0 Barcode Scan Recognition Module – USB/UART Interface₹2,179
Alternatives and when to choose them
- Barcode and QR scanner modules: overview of all types.
- AI vision sensors: HuskyLens can also read QR.
- ESP32-CAM: DIY QR reading with a camera.
Common mistakes to avoid
- Mismatched baud rates.
- Feeding 5 V logic into a 3.3 V UART pin.
- Losing the manual with the setup barcodes.
- Scanning curved or glossy codes in harsh light.
Frequently asked questions
How do I change settings on a GM65 scanner?
Scan the setting barcodes printed in the user manual.
Can it read QR codes from a phone screen?
Yes. Most GM modules read QR codes on screens, though glare can slow it.
Why do I get garbage characters on Arduino?
The baud rate does not match; set both to 9600 or the module setting.
Can I use it as a USB keyboard scanner?
Yes. In USB HID mode it types the code into any text box.
How do I trigger a scan from code?
Use command trigger mode and send the scan command over UART.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





