Component guide · Advanced · 9 min read
Hall Effect Sensor ICs

Honeywell SS49E, SS495A and SS496 Linear, SS441 and SS443 Unipolar, SS41 and SS413 Bipolar, SS360 and SS461 Latching, SL353 and SM351 Omnipolar, plus Industrial Hall Speed and Position Sensors
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Hall ICs come in five behaviours. Linear (ratiometric) parts like the SS49E and SS495A give a voltage proportional to the field. Unipolar switches like the SS441A turn on with a south pole. Bipolar switches like the SS41 need south to turn on and north to turn off. Latching parts like the SS360 stay in their last state. Omnipolar parts like the SL353 switch on either pole.
Key specs at a glance
- Linear
- SS49E, SS39ET, SS59ET, SS495A, SS496A/B: about Vcc/2 at zero field
- Unipolar
- SS341, SS343, SS345, SS441, SS443, SS449, SS543, SS549
- Bipolar and latching
- SS40A, SS41, SS411, SS413, SS461, SS466, SS566, SS360, SS361
- Omnipolar
- SS351, SS451, SL353, SM351LT, SM353LT nanopower
- Packages
- TO-92 through-hole, SOT-23 and SOT-89 SMD
- Industrial
- Honeywell 103SR, SNDH and LCZ speed sensors; Littelfuse 55100 flange sensors; TE KMXP AMR
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Honeywell SS49E Ratiometric Hall Effect Sensor TO-92 Flat – ±650G to ±1000G Range₹101
Option 2Honeywell SS496B Ratiometric Linear Hall Effect Sensor, TO-92 Package, 4.5-10.5Vdc, -840 to +840 G₹167
Option 3Honeywell SS39ET Ratiometric Linear Hall Effect Sensor – SOT-23-3 SMT₹62
Option 4Honeywell SS496A1 Ratiometric Hall Effect Sensor – TO-92 Package₹127
Option 5Honeywell SS496A Ratiometric Hall Effect Sensor – TO-92 Package₹259
Option 6Honeywell SS495A1 Ratiometric Hall Effect Magnetic Sensor – TO-92 Package₹529
What the Hall effect sensor ICs and industrial Hall sensors (Honeywell SS and SL series) is
Hall effect sensor ICs such as the A3144, US1881, SS49E and DRV5053 detect magnetic fields, as switches, latches or analog sensors, for speed, position and current sensing.
Pick by job. Use a linear part to measure field or position. Use a unipolar switch for simple magnet-present detection. Use bipolar or latching parts with ring magnets in brushless motor commutation and encoders. Use omnipolar nanopower parts like the SM351LT in battery devices such as water meters and lid switches, where you do not want to care about pole direction.
Digital Honeywell Hall switches have open-collector (sinking) outputs on most parts, so add a pull-up resistor. Industrial speed sensors like the SNDH-H3L read gear teeth on engines and gearboxes.
Hall effect sensor ICs and industrial Hall sensors (Honeywell SS and SL series) pinout
The pins on the Hall effect sensor ICs and industrial Hall sensors (Honeywell SS and SL series) and what each one does.
| Pin | Function |
|---|---|
| VCC / Vs | Supply, 3-24V on many TO-92 parts |
| GND | Ground |
| OUT | Open-collector digital or ratiometric analog |
| Marked face | The sensing face; south pole acts on this side |
| Pin order | Check the data sheet: TO-92 and SOT-23 orders differ |
- VCC / Vs
- Supply, 3-24V on many TO-92 parts
- GND
- Ground
- OUT
- Open-collector digital or ratiometric analog
- Marked face
- The sensing face; south pole acts on this side
- Pin order
- Check the data sheet: TO-92 and SOT-23 orders differ
Wiring the Hall effect sensor ICs and industrial Hall sensors (Honeywell SS and SL series)
Add a 0.1 µF capacitor close to the sensor between VCC and GND, especially on long cables.
| Hall effect sensor ICs and industrial Hall sensors (Honeywell SS and SL series) pin | Connection | Note |
|---|---|---|
| VCC | 5V | Check the part's range |
| GND | GND | Common |
| OUT (digital) | D2 with 10k pull-up | Open collector |
| OUT (linear) | A0 | About 2.5V with no magnet at 5V |
- VCC
- Connection:
- 5V
- Note:
- Check the part's range
- GND
- Connection:
- GND
- Note:
- Common
- OUT (digital)
- Connection:
- D2 with 10k pull-up
- Note:
- Open collector
- OUT (linear)
- Connection:
- A0
- Note:
- About 2.5V with no magnet at 5V
Example code
Measure the zero-field voltage of your part first and use it instead of 2500 mV for better accuracy.
const int HALL = A0;
const float MV_PER_GAUSS = 3.125; // SS495A at 5V; SS49E is lower, see data sheet
void setup() {
Serial.begin(9600);
}
void loop() {
int raw = analogRead(HALL);
float mv = raw * 5000.0 / 1023.0;
float gauss = (mv - 2500.0) / MV_PER_GAUSS; // + south, - north
Serial.print("Field: ");
Serial.print(gauss, 0);
Serial.println(" G");
delay(200);
}Setup and tuning
switches turn on near one pole, latches toggle between poles, and linear sensors give a voltage proportional to field strength.
connect VCC, GND and output; switch and latch types are open drain and need a 10 kΩ pull-up.
many run on 3.3 to 5 V; check the datasheet for your part.
place the magnet face toward the marked side of the sensor.
count pulses with interrupts for RPM.
What you need
Shop this list20 of 20 found in our store · ₹2,894
Honeywell SS49E Ratiometric Hall Effect Sensor TO-92 Flat – ±650G to ±1000G Range: the part this guide coversHoneywell SS49E Ratiometric Hall Effect Sensor TO-92 Flat – ±650G to ±1000G Range₹101
Honeywell SS496B Ratiometric Linear Hall Effect Sensor, TO-92 Package, 4.5-10.5Vdc, -840 to +840 G: another version this guide coversHoneywell SS496B Ratiometric Linear Hall Effect Sensor, TO-92 Package, 4.5-10.5Vdc, -840 to +840 G₹167
Honeywell SS39ET Ratiometric Linear Hall Effect Sensor – SOT-23-3 SMT: another version this guide coversHoneywell SS39ET Ratiometric Linear Hall Effect Sensor – SOT-23-3 SMT₹62
Honeywell SS496A1 Ratiometric Hall Effect Sensor – TO-92 Package: another version this guide coversHoneywell SS496A1 Ratiometric Hall Effect Sensor – TO-92 Package₹127
Honeywell SS496A Ratiometric Hall Effect Sensor – TO-92 Package: another version this guide coversHoneywell SS496A Ratiometric Hall Effect Sensor – TO-92 Package₹259
Honeywell SS495A1 Ratiometric Hall Effect Magnetic Sensor – TO-92 Package: another version this guide coversHoneywell SS495A1 Ratiometric Hall Effect Magnetic Sensor – TO-92 Package₹529
Honeywell SS495A-SP Ratiometric Hall Effect Magnetic Sensor – SMD TO-92-Flat-3 Package: another version this guide coversHoneywell SS495A-SP Ratiometric Hall Effect Magnetic Sensor – SMD TO-92-Flat-3 Package₹259
Honeywell SS59ET Board Mount Hall Effect/Magnetic Sensor, SOT-89-3 SMD/SMT, -1000 G to 1000 G Range: another version this guide coversHoneywell SS59ET Board Mount Hall Effect/Magnetic Sensor, SOT-89-3 SMD/SMT, -1000 G to 1000 G Range₹64
Honeywell SS341RT Unipolar Hall Effect Sensor IC – SOT-23 Package, 3V Operation: another version this guide coversHoneywell SS341RT Unipolar Hall Effect Sensor IC – SOT-23 Package, 3V Operation₹51
Honeywell SS343RT Unipolar Hall Effect Magnetic Sensor – SOT-23-3 SMD: another version this guide coversHoneywell SS343RT Unipolar Hall Effect Magnetic Sensor – SOT-23-3 SMD₹51
Honeywell SS343RT Unipolar Hall Effect Magnetic Sensor, 45 G to 205 G, SOT-23-3 Package: another version this guide coversHoneywell SS343RT Unipolar Hall Effect Magnetic Sensor, 45 G to 205 G, SOT-23-3 Package₹80
Honeywell SS345PT Unipolar Hall Effect Magnetic Sensor – SOT-23-3 SMD, 55-280 G Operating Point, 2.7-7V: another version this guide coversHoneywell SS345PT Unipolar Hall Effect Magnetic Sensor – SOT-23-3 SMD, 55-280 G Operating Point, 2.7-7V₹43
Honeywell SS441A Unipolar Hall Effect Magnetic Sensor – TO-92 Package: another version this guide coversHoneywell SS441A Unipolar Hall Effect Magnetic Sensor – TO-92 Package₹87
Honeywell SS441R Unipolar Hall Effect Magnetic Sensor – TO-92 Through Hole, 35-135 G Operating Point: another version this guide coversHoneywell SS441R Unipolar Hall Effect Magnetic Sensor – TO-92 Through Hole, 35-135 G Operating Point₹72
Honeywell SS443A Unipolar Hall Effect Magnetic Sensor – TO-92-Flat-3 Package: another version this guide coversHoneywell SS443A Unipolar Hall Effect Magnetic Sensor – TO-92-Flat-3 Package₹101
Honeywell SS443F Solid State Hall Effect Magnetic Sensor – 110-180 G Operating Point, Through Hole: another version this guide coversHoneywell SS443F Solid State Hall Effect Magnetic Sensor – 110-180 G Operating Point, Through Hole₹72
Honeywell SS443R Unipolar Hall Effect Magnetic Sensor – TO-92 Through Hole, 45-205 G Operating Point: another version this guide coversHoneywell SS443R Unipolar Hall Effect Magnetic Sensor – TO-92 Through Hole, 45-205 G Operating Point₹41
Honeywell SS449A Unipolar Hall Effect Magnetic Sensor – TO-92-Flat-3 Package: another version this guide coversHoneywell SS449A Unipolar Hall Effect Magnetic Sensor – TO-92-Flat-3 Package₹66
Honeywell SS543AT Unipolar Hall Effect Magnetic Sensor – 3V DC, 110-180 G Operating Point: another version this guide coversHoneywell SS543AT Unipolar Hall Effect Magnetic Sensor – 3V DC, 110-180 G Operating Point₹73
Honeywell SS549AT Unipolar Hall Effect Sensor – SOT-89-3 SMD, 3.8-30Vdc, 180-420 G: another version this guide coversHoneywell SS549AT Unipolar Hall Effect Sensor – SOT-89-3 SMD, 3.8-30Vdc, 180-420 G₹589
Alternatives and when to choose them
- Hall effect sensor modules: ready boards.
- Magnetometers and 9-axis IMUs: 3-axis field sensing.
- Industrial inductive proximity sensors: metal without a magnet.
Common mistakes to avoid
- Leaving out the pull-up on open-drain outputs.
- Using the wrong magnet pole.
- Mixing up switch and latch types.
- Placing the magnet too far away.
Frequently asked questions
What is the difference between a Hall switch and a latch?
A switch turns off when the magnet leaves; a latch stays until the opposite pole comes.
Why does my A3144 never switch?
Add a pull-up resistor and check the magnet pole and side.
Can a linear Hall sensor measure distance?
Roughly, because field strength falls with distance.
Can I measure RPM with it?
Yes. Fix a magnet on the shaft and count pulses with an interrupt.
Can it measure current?
Yes, linear sensors inside a current sensor IC or a ferrite ring.
Parts for this guide
- ₹101View
- ₹167View
- ₹62View
- ₹127View
- ₹259View
- ₹529View
- ₹259View
- ₹64View
- ₹51View
- ₹51View
- ₹80View
Honeywell SS345PT Unipolar Hall Effect Magnetic Sensor – SOT-23-3 SMD, 55-280 G Operating Point, 2.7-7V₹43View- ₹87View
Honeywell SS441R Unipolar Hall Effect Magnetic Sensor – TO-92 Through Hole, 35-135 G Operating Point₹72View- ₹101View
- ₹72View
Honeywell SS443R Unipolar Hall Effect Magnetic Sensor – TO-92 Through Hole, 45-205 G Operating Point₹41View- ₹66View
- ₹73View
- ₹589View
- ₹68View
Honeywell SS41 Hall Effect Sensor, Position, Digital, Bipolar, SS40 Series, Sink Output, 4.5 to 24 Vdc₹359View- ₹163View
- ₹138View
- ₹62View
Honeywell SS41F Bipolar Hall Effect Sensor – TO-92 Flat-3 Package, 40-150 G Operating Point, 3.8-30V DC₹289View
Honeywell SS461R Bipolar Hall Effect Magnetic Sensor – TO-92 Flat-3 Package, 5G to 120G Operating Point₹37View- ₹104View
- ₹119View
- ₹41View
- ₹26View
- ₹42View
- ₹88View
- ₹46View
- ₹62View
Honeywell SS451A Omnipolar Hall Effect Sensor – TO-92 Flat Package, 3-24VDC, 35-135 G Operating Point₹72View- ₹46View
- ₹81View
- ₹62View
- ₹70View
- ₹80View
- ₹39View
Honeywell 103SR13A-1 Hall Effect Position Sensor, Sink Output, Cylindrical Threaded Housing, 152mm Leads₹4,509View- ₹1,189View
- ₹1,419View
- ₹1,469View
- ₹29,169View
Honeywell LCZ460 Hall Effect Zero Speed Sensor, 9.5mm Dia, 15 G, 10 Hz to 2000 Hz, 4.5–26 VDC, Wire Leads₹32,659View
TE Connectivity KMXP1000 AMR Magnetoresistive Sensor, Linear Output, 10V Supply, 1 mm Air Gap, DFN-12₹789View- ₹359View
- ₹177View
- ₹20View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

























