Component guide · Beginner · 3 min read
HDMI to VGA Adapters and Display Cables

HDMI Male to VGA Female 1080p Converter, Ag6200 HDMI to VGA Adapter, HDMI to VGA with 3.5mm Audio, ZY6511 Converter, Micro HDMI to VGA Cable and 0.5 m Flat HDMI Cable
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
An HDMI to VGA adapter lets a Raspberry Pi, laptop or mini PC drive an old VGA monitor or projector. It is an active converter: a small chip turns the digital HDMI signal into analog VGA, powered from the HDMI port. Models with a 3.5 mm jack also pass the sound out. Micro HDMI versions plug straight into a Pi 4 or Pi 5. Flat HDMI cables help in tight cases.
Key specs at a glance
- Direction
- HDMI source to VGA display only
- Resolution
- Up to 1920x1080 at 60 Hz
- Audio
- 3.5 mm out on audio models
- Input
- HDMI male or micro HDMI male
- Power
- From the HDMI port; some have a micro USB aux power
- Cable
- 0.5 m flat HDMI, pure copper
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1HDMI Male to VGA Female 1080P Converter Adapter₹156
Option 2HDMI to HDMI Flat Cable – 0.5 Meter Pure Copper₹158
Option 3HDMI to VGA Adapter (Black) with Ag6200 Chip₹209
Option 4HDMI to VGA Converter with 3.5mm Audio Out₹219
Option 5HDMI to VGA Converter with Audio Interface ZY6511₹279
Option 6Micro HDMI to VGA Converter Cable (No Audio)₹279
What the HDMI to VGA adapters and display cables: HDMI and micro HDMI to VGA converters with audio, flat HDMI cables is
HDMI to VGA adapters and display cables connect boards and laptops to monitors and projectors, converting digital HDMI video to analog VGA where needed.
These adapters only work one way: HDMI out to VGA in. They cannot connect a VGA computer to an HDMI monitor. If the screen stays black on a Raspberry Pi, the Pi may not detect the adapter; set hdmi_force_hotplug and a VGA-friendly mode, or on Pi 5 choose the resolution in Screen Configuration.
If the image flickers or drops out, the port may not supply enough current; use the aux power input where present. Use the audio jack model for projectors, since VGA carries no sound.
HDMI to VGA adapters and display cables: HDMI and micro HDMI to VGA converters with audio, flat HDMI cables pinout
The pins on the HDMI to VGA adapters and display cables: HDMI and micro HDMI to VGA converters with audio, flat HDMI cables and what each one does.
| Pin | Function |
|---|---|
| HDMI / micro HDMI | From the computer |
| VGA (DE-15) female | To the monitor cable |
| 3.5 mm audio | Sound out on audio models |
| Micro USB | Optional extra power on some |
- HDMI / micro HDMI
- From the computer
- VGA (DE-15) female
- To the monitor cable
- 3.5 mm audio
- Sound out on audio models
- Micro USB
- Optional extra power on some
Wiring the HDMI to VGA adapters and display cables: HDMI and micro HDMI to VGA converters with audio, flat HDMI cables
Connect the adapter before booting the Pi so it is detected at start-up.
| HDMI to VGA adapters and display cables: HDMI and micro HDMI to VGA converters with audio, flat HDMI cables pin | Connection | Note |
|---|---|---|
| Adapter HDMI | Pi or laptop HDMI out | Micro HDMI on Pi 4/5 |
| VGA cable | Adapter to monitor | Screw it in |
| Audio | Speakers or projector | Audio models |
- Adapter HDMI
- Connection:
- Pi or laptop HDMI out
- Note:
- Micro HDMI on Pi 4/5
- VGA cable
- Connection:
- Adapter to monitor
- Note:
- Screw it in
- Audio
- Connection:
- Speakers or projector
- Note:
- Audio models
Example code
On Pi 5 and newer KMS setups these legacy lines are ignored; set the resolution from Screen Configuration or the kernel video= option instead.
# Edit /boot/firmware/config.txt (older OS: /boot/config.txt) and add:
hdmi_force_hotplug=1
hdmi_group=2 # DMT (monitor) modes
hdmi_mode=82 # 1920x1080 60 Hz; use 16 for 1024x768, 35 for 1280x1024
hdmi_drive=2 # send audio over HDMI to the adapter
sudo rebootSetup and tuning
HDMI to VGA adapters are one way; they cannot turn a VGA source into HDMI.
some adapters need extra power from micro USB, especially with a Raspberry Pi.
VGA carries no audio; pick an adapter with a 3.5 mm jack if you need sound.
set the source to a mode the monitor supports, such as 1024×768 or 1920×1080.
if the screen stays blank, set hdmi_force_hotplug=1 in config.txt.
What you need
Shop this list6 of 6 found in our store · ₹1,300
HDMI Male to VGA Female 1080P Converter Adapter: the part this guide coversHDMI Male to VGA Female 1080P Converter Adapter₹156
HDMI to HDMI Flat Cable – 0.5 Meter Pure Copper: another version this guide coversHDMI to HDMI Flat Cable – 0.5 Meter Pure Copper₹158
HDMI to VGA Adapter (Black) with Ag6200 Chip: another version this guide coversHDMI to VGA Adapter (Black) with Ag6200 Chip₹209
HDMI to VGA Converter with 3.5mm Audio Out: another version this guide coversHDMI to VGA Converter with 3.5mm Audio Out₹219
HDMI to VGA Converter with Audio Interface ZY6511: another version this guide coversHDMI to VGA Converter with Audio Interface ZY6511₹279
Micro HDMI to VGA Converter Cable (No Audio): another version this guide coversMicro HDMI to VGA Converter Cable (No Audio)₹279
Alternatives and when to choose them
- Raspberry Pi touch displays: screens made for the Pi.
- Pi desktop computers: monitors and keyboards.
Common mistakes to avoid
- Buying a one-way adapter for the wrong direction.
- Running the adapter without its extra power on a Pi.
- Expecting audio through VGA.
- Choosing a resolution the monitor cannot show.
Frequently asked questions
Can I connect a Raspberry Pi to a VGA monitor?
Yes, with an active HDMI to VGA adapter; set hdmi_force_hotplug if the screen stays blank.
Does an HDMI to VGA adapter carry sound?
Only models with an audio jack; VGA itself has no audio.
Can I use it to turn a VGA laptop into HDMI?
No. You need a VGA to HDMI converter, which is a different device.
Why does the picture flicker?
The adapter is short of power or the resolution is too high for the monitor.
Is a passive HDMI to VGA cable OK?
No. HDMI to VGA always needs an active converter chip.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
