Component guide · Advanced · 5 min read
Large UAV Motors 5008 and Up

T-Motor MN5008, MN6007, MN7005, MN8012, U7 and V505, MAD XC5000, Scorpion, Reflex Drive and More
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Large UAV motors from 5008 to 8308 lift heavy cameras, sprayers and delivery payloads on 18 to 30 inch props. They run at low KV, about 90 to 750, on 6S to 12S batteries. Pick motor, prop, ESC and battery together from the maker's thrust table, and plan for twice the all-up weight in total thrust.
Key specs at a glance
- Sizes
- 5008, 5010, 5024, 5040, 6007, 7005, 7224, 8012, 8020, 8308
- KV
- About 90 to 750 KV
- Battery
- 6S to 12S
- Props
- 15 to 30 inch carbon or folding
- ESC
- 40 to 100 A, FOC on many systems
- Mounting
- M3 or M4 on large patterns, check the drawing
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1T-Motor Antigravity MN6007 KV320 Brushless Motor₹13,279
Option 2Eaglepower LA 8308 KV90 Brushless Motor₹11,579
Option 3T-Motor AT7224 KV190 Brushless Motor – Long Shaft₹30,329
Option 4T-Motor Antigravity MN8012 KV100 Brushless Motor₹37,409
Option 5T-Motor Antigravity MN7005 KV115₹22,486
Option 6T-Motor Anti-gravity MN7005 KV230 Brushless Motor₹29,759
What the Large UAV motors 5008 and up for heavy-lift multirotors is
Large UAV motors of 50xx size and up are low-KV brushless motors for heavy-lift drones, crop sprayers and VTOL aircraft, driving 18 to 30 inch props on 6S to 14S.
A 5008 or 5010 motor on 6S with 16 to 18 inch props suits a 4 to 8 kg quad or hex. MN7005 and MN8012 motors on 12S with 26 to 30 inch props lift much heavier frames.
At this size, cable gauge, ESC cooling, vibration and prop balance matter as much as the motor. Use the maker's prop adapter and torque the bolts as specified.
Large UAV motors 5008 and up for heavy-lift multirotors pinout
The pins on the Large UAV motors 5008 and up for heavy-lift multirotors and what each one does.
| Pin | Function |
|---|---|
| Phase wires | Three wires to the ESC, any order; swap any two to reverse rotation |
| Mount holes | M3 or M4; check the bolt pattern (16x16, 19x19, 25x25 mm and up) |
| Shaft | Threaded M5 or M6 with a nut, or a prop adapter on large motors |
| Bell | The outer part that spins; keep it free of debris |
| Size code | First two digits stator width, last two stator height in mm (2806.5 = 28 x 6.5 mm) |
- Phase wires
- Three wires to the ESC, any order; swap any two to reverse rotation
- Mount holes
- M3 or M4; check the bolt pattern (16x16, 19x19, 25x25 mm and up)
- Shaft
- Threaded M5 or M6 with a nut, or a prop adapter on large motors
- Bell
- The outer part that spins; keep it free of debris
- Size code
- First two digits stator width, last two stator height in mm (2806.5 = 28 x 6.5 mm)
Wiring the Large UAV motors 5008 and up for heavy-lift multirotors
Use cable rated for full current with margin, and keep power cables away from the compass. Remove props for all bench tests. Check screw length so it does not touch the motor windings.
| Large UAV motors 5008 and up for heavy-lift multirotors pin | Connection | Note |
|---|---|---|
| Motor phase A, B, C | ESC motor pads or bullet connectors | Any order, reverse in software if needed |
| ESC power | Battery via XT60, XT90 or AS150 | Within the motor's cell rating |
| ESC signal | Flight controller motor output | DShot on FPV, PWM or DShot on ArduPilot |
- Motor phase A, B, C
- Connection:
- ESC motor pads or bullet connectors
- Note:
- Any order, reverse in software if needed
- ESC power
- Connection:
- Battery via XT60, XT90 or AS150
- Note:
- Within the motor's cell rating
- ESC signal
- Connection:
- Flight controller motor output
- Note:
- DShot on FPV, PWM or DShot on ArduPilot
Example code
Motor letters go clockwise from the front right in ArduPilot's motor test, not by output number.
1. Props OFF, battery connected through a smoke stopper.
2. Setup > Optional Hardware > Motor Test.
3. Set throttle to 5 to 10 percent and duration 2 s.
4. Test motors A, B, C, D in order and check position and spin direction against the frame diagram.
5. Swap any two phase wires on a motor that spins the wrong way.
6. Set MOT_SPIN_ARM and MOT_SPIN_MIN so all motors spin evenly at arming.Setup and tuning
choose from the maker's thrust table for your take-off weight, aiming at about 50 % throttle hover.
use ESCs rated above the motor's max current and full battery voltage.
use the props the maker lists and balance them.
use all mount screws with threadlocker and check them often.
keep motor vents clear of dust.
What you need
Shop this list20 of 20 found in our store · ₹3,58,664
T-Motor Antigravity MN6007 KV320 Brushless Motor: the part this guide coversT-Motor Antigravity MN6007 KV320 Brushless Motor₹13,279
Eaglepower LA 8308 KV90 Brushless Motor: another version this guide coversEaglepower LA 8308 KV90 Brushless Motor₹11,579
T-Motor AT7224 KV190 Brushless Motor – Long Shaft: another version this guide coversT-Motor AT7224 KV190 Brushless Motor – Long Shaft₹30,329
T-Motor Antigravity MN8012 KV100 Brushless Motor: another version this guide coversT-Motor Antigravity MN8012 KV100 Brushless Motor₹37,409
T-Motor Antigravity MN7005 KV115: another version this guide coversT-Motor Antigravity MN7005 KV115₹22,486
T-Motor Anti-gravity MN7005 KV230 Brushless Motor: another version this guide coversT-Motor Anti-gravity MN7005 KV230 Brushless Motor₹29,759
Reflex Drive 5008 KV340 UAV Brushless Motor: another version this guide coversReflex Drive 5008 KV340 UAV Brushless Motor₹9,689
Reflex Drive RD 5008 KV370 Motor 6S: another version this guide coversReflex Drive RD 5008 KV370 Motor 6S₹7,449
T-Motor Antigravity MN5008 KV170: another version this guide coversT-Motor Antigravity MN5008 KV170₹10,979
T-Motor Antigravity MN5008 KV340 Brushless Motor: another version this guide coversT-Motor Antigravity MN5008 KV340 Brushless Motor₹10,979
Reflex Drive RD MI-5008 6S KV340 UAV Brushless Motor: another version this guide coversReflex Drive RD MI-5008 6S KV340 UAV Brushless Motor₹10,239
Scorpion Tribunus HKIII-5040-530kv Drone Motor: another version this guide coversScorpion Tribunus HKIII-5040-530kv Drone Motor₹55,749
Scorpion HK5-5024-535KV Brushless Motor (6mm Shaft): another version this guide coversScorpion HK5-5024-535KV Brushless Motor (6mm Shaft)₹31,369
MAD Components Components XC5500 CRIMSON Brushless Motor 635KV: another version this guide coversMAD Components XC5500 CRIMSON Brushless Motor 635KV₹8,779Closest match, check the specs
MAD Components Components XC5500 CRIMSON Brushless Motor 505KV: another version this guide coversMAD Components XC5500 CRIMSON Brushless Motor 505KV₹8,779Closest match, check the specs
MAD Components Components XC5000 POLAR Brushless Motor 380KV: another version this guide coversMAD Components XC5000 POLAR Brushless Motor 380KV₹9,219Closest match, check the specs
MAD Components Components XC5000 POLAR Brushless Motor 345KV: another version this guide coversMAD Components XC5000 POLAR Brushless Motor 345KV₹9,219Closest match, check the specs
T-Motor U7-V2.0 490KV Drone Motor: another version this guide coversT-Motor U7-V2.0 490KV Drone Motor₹14,126
T-Motor V505 KV260 Brushless Motor: another version this guide coversT-Motor V505 KV260 Brushless Motor₹16,269
T-Motor MN501-S KV360 Brushless Motor: another version this guide coversT-Motor MN501-S KV360 Brushless Motor₹10,979
Alternatives and when to choose them
- Heavy-lift drone motors: ready combos.
- Multirotor motors 35xx to 45xx: smaller drones.
- Heavy-lift and industrial ESCs: ESC options.
Common mistakes to avoid
- Hovering above 70 % throttle.
- No threadlocker on mount screws.
- Unbalanced props.
- ESCs below the battery voltage.
Frequently asked questions
How do I size large UAV motors?
Use the thrust table so the drone hovers near 50 % throttle.
What KV do 50xx motors use?
Low KV, often 100 to 400, for big props.
Why are my motors hot after flight?
The prop is too large or the drone too heavy.
Do I need threadlocker on screws?
Yes. Vibration loosens screws on large motors.
Can I use carbon or wood props?
Yes, as listed by the motor maker; balance them.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






