Component guide · Intermediate · 4 min read
LSM6DSO and LSM6DS3 6-Axis IMU

Pinout, Wiring and Code
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The ST LSM6DSO is a low-power 6-axis IMU with a 3-axis accelerometer and gyroscope on I2C or SPI. Its family includes the LSM6DS3TR-C, the LSM6DSOX with a machine-learning core, the LSM6DSO32 with a ±32 g range for impacts, and the newer LSM6DSV16X with sensor fusion. They share the same address (0x6A or 0x6B) and similar code, and appear in many Arduino and Seeed boards.
Key specs at a glance
- Sensors
- 3-axis accelerometer and 3-axis gyroscope
- Ranges
- ±2 to ±16 g (±32 g on LSM6DSO32); ±125 to ±2000 °/s (±4000 on DSV16X)
- Data rate
- Up to 6.66 kHz (7.68 kHz on DSV16X)
- Interface
- I2C (0x6A or 0x6B), SPI, I3C
- Supply
- 1.71 to 3.6 V (breakouts 3.3 to 5 V)
- Current
- About 0.55 mA in high-performance mode
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SparkFun LSM6DSO 6 Degrees of Freedom IMU Breakout – Qwiic Connector₹2,029
Option 2STMicroelectronics LSM6DSO 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Low Power, I²C/SPI/I3C, 1.71~3.6V, LGA-14₹289
Option 3STMicroelectronics LSM6DSO32 6-Axis IMU Sensor, ±2/±4/±8/±16/±32 g Accelerometer + ±2000 dps Gyroscope, 9KB FIFO, SPI/I²C/I3C, LGA-14₹559
Option 4STMicroelectronics LSM6DSO32TR 6-Axis IMU, 3-Axis Accelerometer + 3-Axis Gyroscope, I²C/SPI/MIPI I3C, ±4/8/16/32g, ±125–2000 dps, Low Power SMD₹5,289
Option 5STMicroelectronics LSM6DSOXTR 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Machine Learning Core (MLC), I²C/SPI/I3C, 1.71~3.6V, LGA-14 (Tape & Reel)₹259
Option 6STMicroelectronics LSM6DSOWTR LGA-14 6-Axis IMU Motion Sensor₹337
What the LSM6DSO IMU is
These IMUs are used in phones, wearables and boards such as the Arduino Nano 33 IoT and Nano RP2040 Connect. They include step counting, tap and free-fall detection, and a FIFO buffer so the microcontroller can read many samples at once.
The LSM6DSOX can run small decision-tree models on the sensor itself, for example to recognise activities, while the main chip sleeps. Bare LGA chips need a PCB; breakouts from SparkFun and Adafruit make them easy to try.
LSM6DSO IMU pinout
The pins on the LSM6DSO IMU and what each one does.
| Pin | Function |
|---|---|
| VIN / VCC | Supply (3.3 or 5 V on breakouts) |
| GND | Ground |
| SDA / SCL | I2C data and clock |
| SDO / SA0 | I2C address select (0x6A low, 0x6B high) or SPI data out |
| CS | SPI chip select (high for I2C) |
| INT1 / INT2 | Interrupt outputs |
- VIN / VCC
- Supply (3.3 or 5 V on breakouts)
- GND
- Ground
- SDA / SCL
- I2C data and clock
- SDO / SA0
- I2C address select (0x6A low, 0x6B high) or SPI data out
- CS
- SPI chip select (high for I2C)
- INT1 / INT2
- Interrupt outputs
Wiring the LSM6DSO IMU
Most breakouts have pull-up resistors and a regulator, so they run from 3.3 V or 5 V. Bare sensor ICs are 3.3 V (or 1.8 V) only: solder them to a breakout first and use a level shifter with 5 V boards.
| LSM6DSO IMU pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5V (or 3.3V) | 3V3 |
| GND | GND | GND |
| SDA | A4 | GPIO 21 |
| SCL | A5 | GPIO 22 |
- VCC
- Arduino Uno:
- 5V (or 3.3V)
- ESP32:
- 3V3
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SDA
- Arduino Uno:
- A4
- ESP32:
- GPIO 21
- SCL
- Arduino Uno:
- A5
- ESP32:
- GPIO 22
Example code
Use the class that matches your chip: Adafruit_LSM6DSOX, Adafruit_LSM6DS3TRC, Adafruit_LSM6DSO32. For the LSM6DSV16X use the SparkFun or ST library.
#include <Adafruit_LSM6DSO32.h>
Adafruit_LSM6DSO32 imu;
void setup() {
Serial.begin(115200);
if (!imu.begin_I2C()) { Serial.println("LSM6DS not found"); while (1); }
imu.setAccelRange(LSM6DSO32_ACCEL_RANGE_8_G);
imu.setGyroRange(LSM6DS_GYRO_RANGE_500_DPS);
}
void loop() {
sensors_event_t a, g, t;
imu.getEvent(&a, &g, &t);
Serial.printf("acc m/s2: %.2f %.2f %.2f gyro rad/s: %.2f %.2f %.2f\n",
a.acceleration.x, a.acceleration.y, a.acceleration.z, g.gyro.x, g.gyro.y, g.gyro.z);
delay(100);
}Setup and tuning
to the exact chip; the ID check fails otherwise.
most breakouts default to 0x6A; a jumper or SDO high gives 0x6B.
choose the LSM6DSO32 for rockets, crash detection and sports sensors above 16 g.
average the gyro while still to remove its offset.
What you need
Shop this list16 of 17 found in our store · ₹17,845
SparkFun LSM6DSO 6 Degrees of Freedom IMU Breakout – Qwiic Connector: the part this guide coversSparkFun LSM6DSO 6 Degrees of Freedom IMU Breakout – Qwiic Connector₹2,029
STMicroelectronics LSM6DSO 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Low Power, I²C/SPI/I3C, 1.71~3.6V, LGA-14: another version this guide coversSTMicroelectronics LSM6DSO 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Low Power, I²C/SPI/I3C, 1.71~3.6V, LGA-14₹289
STMicroelectronics LSM6DSO32 6-Axis IMU Sensor, ±2/±4/±8/±16/±32 g Accelerometer + ±2000 dps Gyroscope, 9KB FIFO, SPI/I²C/I3C, LGA-14: another version this guide coversSTMicroelectronics LSM6DSO32 6-Axis IMU Sensor, ±2/±4/±8/±16/±32 g Accelerometer + ±2000 dps Gyroscope, 9KB FIFO, SPI/I²C/I3C, LGA-14₹559
STMicroelectronics LSM6DSO32TR 6-Axis IMU, 3-Axis Accelerometer + 3-Axis Gyroscope, I²C/SPI/MIPI I3C, ±4/8/16/32g, ±125–2000 dps, Low Power SMD: another version this guide coversSTMicroelectronics LSM6DSO32TR 6-Axis IMU, 3-Axis Accelerometer + 3-Axis Gyroscope, I²C/SPI/MIPI I3C, ±4/8/16/32g, ±125–2000 dps, Low Power SMD₹5,289
STMicroelectronics LSM6DSOXTR 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Machine Learning Core (MLC), I²C/SPI/I3C, 1.71~3.6V, LGA-14 (Tape & Reel): another version this guide coversSTMicroelectronics LSM6DSOXTR 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Machine Learning Core (MLC), I²C/SPI/I3C, 1.71~3.6V, LGA-14 (Tape & Reel)₹259
STMicroelectronics LSM6DSOWTR LGA-14 6-Axis IMU Motion Sensor: another version this guide coversSTMicroelectronics LSM6DSOWTR LGA-14 6-Axis IMU Motion Sensor₹337
STMicroelectronics LSM6DSV16X 6-Axis IMU Sensor, ±16g Accelerometer + ±4000dps Gyroscope, Embedded ML Core, SPI/I²C/I3C, LGA-14: another version this guide coversSTMicroelectronics LSM6DSV16X 6-Axis IMU Sensor, ±16g Accelerometer + ±4000dps Gyroscope, Embedded ML Core, SPI/I²C/I3C, LGA-14₹739
SparkFun LSM6DSV16X 6DoF IMU Breakout – Accelerometer + Gyroscope, Qwiic & Header Pins: another version this guide coversSparkFun LSM6DSV16X 6DoF IMU Breakout – Accelerometer + Gyroscope, Qwiic & Header Pins₹3,459
Adafruit LSM6DS3TR-C + LIS3MDL Precision 9 DoF IMU – STEMMA QT / Qwiic: another version this guide coversAdafruit LSM6DS3TR-C + LIS3MDL Precision 9 DoF IMU – STEMMA QT / Qwiic₹3,123
STMicroelectronics LSM6DS3TR-C LGA-14 6-Axis Accelerometer Gyro Sensor: another version this guide coversSTMicroelectronics LSM6DS3TR-C LGA-14 6-Axis Accelerometer Gyro Sensor₹297
STMicroelectronics LSM6DSDTR LGA-14 6-Axis IMU Accelerometer Gyro: another version this guide coversSTMicroelectronics LSM6DSDTR LGA-14 6-Axis IMU Accelerometer Gyro₹327
STMicroelectronics LSM6DSLTR LGA-14 6-Axis Accelerometer Gyro Sensor: another version this guide coversSTMicroelectronics LSM6DSLTR LGA-14 6-Axis Accelerometer Gyro Sensor₹352
STMicroelectronics LSM6DSRTR LGA-14 6-Axis Accelerometer Gyro Sensor: another version this guide coversSTMicroelectronics LSM6DSRTR LGA-14 6-Axis Accelerometer Gyro Sensor₹209
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389- Uno R3 development board: the controller used in the wiring tableFind this part
0.96 inch OLED display 128x64: to show readings without a computer0.96" OLED Display 128x64₹139Closest match, check the specs
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Alternatives and when to choose them
- BMI323 IMU: Bosch's low-power 6-axis IMU.
- MPU6050: cheaper, well-known, noisier.
- Magnetometers and 9-axis IMUs: add a compass for heading.
Try it: I2c pullup calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Using the wrong library class for the chip variant.
- Soldering bare LGA chips by hand.
- Powering a bare chip from 5 V.
- Expecting stable yaw without a magnetometer.
Frequently asked questions
What is the LSM6DSO I2C address?
0x6A or 0x6B, set by the SDO/SA0 pin.
LSM6DSO or LSM6DSOX?
The DSOX adds a machine-learning core; otherwise they are the same.
What is the LSM6DSO32 for?
High-g impacts up to ±32 g.
Does it work with ESP32?
Yes, on I2C or SPI at 3.3 V.
Can it count steps?
Yes, the pedometer runs inside the sensor.
Parts for this guide
- ₹2,029View
STMicroelectronics LSM6DSO 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Low Power, I²C/SPI/I3C, 1.71~3.6V, LGA-14₹289View
STMicroelectronics LSM6DSO32 6-Axis IMU Sensor, ±2/±4/±8/±16/±32 g Accelerometer + ±2000 dps Gyroscope, 9KB FIFO, SPI/I²C/I3C, LGA-14₹559View
STMicroelectronics LSM6DSO32TR 6-Axis IMU, 3-Axis Accelerometer + 3-Axis Gyroscope, I²C/SPI/MIPI I3C, ±4/8/16/32g, ±125–2000 dps, Low Power SMD₹5,289View
STMicroelectronics LSM6DSOXTR 6-Axis IMU Sensor, ±16g Accelerometer, ±2000 dps Gyroscope, Machine Learning Core (MLC), I²C/SPI/I3C, 1.71~3.6V, LGA-14 (Tape & Reel)₹259View- ₹337View
STMicroelectronics LSM6DSV16X 6-Axis IMU Sensor, ±16g Accelerometer + ±4000dps Gyroscope, Embedded ML Core, SPI/I²C/I3C, LGA-14₹739View- ₹3,459View
- ₹3,123View
- ₹297View
- ₹327View
- ₹352View
- ₹209View
- ₹389View
- ₹359View
- ₹139View
- ₹49View
Calculators
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
- STMicroelectronics LSM6DSO datasheet
- STMicroelectronics LSM6DSO32 datasheet
- Adafruit LSM6DS library documentation
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

