Component guide · Advanced · 5 min read
Miniature Laser and Micro Photoelectric Sensors

M3, M4 and M5 FTD and LTD Laser Switches, Panasonic EX-11, EX-13, EX-14, EX-L261 and FX-101 Fibre Amplifier
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Miniature photoelectric sensors detect small parts in tight spaces such as pick-and-place, electronics assembly and small conveyors. M3 to M5 laser switches are tiny threaded tubes with a fine visible spot and 30 to 130 mm range. Panasonic EX sensors are ultra-small boxes in through-beam and reflective versions, and the FX-101 is an amplifier for fibre-optic heads.
Key specs at a glance
- Body
- M3, M4, M5 threaded tubes, or 10-15 mm boxes (EX series)
- Range
- 2 mm to 500 mm depending on type
- Light
- Visible red laser (LTD) or LED/IR (FTD, EX)
- Supply
- 10-30V DC or 12-24V DC
- Output
- NPN or PNP open collector
- Spot
- Very small, good for wires, pins and tiny parts
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1M3 FTD-03NO 30mm Laser Diffuse Photoelectric Switch – M4 Thread, 10-30V DC₹2,529
Option 2M3 LTD-03NO 30mm Laser Micro Diffuse Photoelectric Switch – Visible Light, Stainless Steel Pipe₹3,199
Option 3M4 FTD-04NO 50mm Laser Micro Diffuse Photoelectric Switch – Stainless Steel Housing₹1,099
Option 4M4 FTD-04NO Laser Micro Diffuse Photoelectric Switch – 70mm Range, 10-30V DC₹1,659
Option 5M4 LTD-04NO 50mm Laser Micro Diffuse Photoelectric Switch – Visible Laser, Stainless Steel Pipe₹2,439
Option 6M4 LTD-04NO Laser Micro Photoelectric Switch Visible Laser 50-70mm Detection – M4 Thread₹1,779
What the Miniature laser and micro photoelectric sensors (M3 to M5, Panasonic EX) is
Miniature laser and micro photoelectric sensors are small industrial light sensors that detect tiny parts, edges and holes on machines and conveyors, often with a visible red laser spot.
Use an M3 to M5 laser switch when you need a small spot on a small part, for example counting resistors on a tape or checking a pin is present. The visible laser makes alignment easy. FTD types use infrared and LTD types use a visible red laser; follow the laser safety label and never look into the beam.
Panasonic EX-11 is a through-beam pair with a 1 mm detection spot; EX-14 is a reflective type for 2 to 25 mm; EX-L261 is a short, fixed-range reflective type for 20 to 50 mm. The FX-101 is the amplifier: you add a separate fibre head and set the threshold with its buttons.
Miniature laser and micro photoelectric sensors (M3 to M5, Panasonic EX) pinout
The pins on the Miniature laser and micro photoelectric sensors (M3 to M5, Panasonic EX) and what each one does.
| Pin | Function |
|---|---|
| Brown | +V supply, 10-30V DC on most |
| Blue | 0V |
| Black | Switching output (NPN or PNP) |
| White | Second output or NC output on 4-wire types |
| M8/M12 pins | 1 brown, 2 white, 3 blue, 4 black |
- Brown
- +V supply, 10-30V DC on most
- Blue
- 0V
- Black
- Switching output (NPN or PNP)
- White
- Second output or NC output on 4-wire types
- M8/M12 pins
- 1 brown, 2 white, 3 blue, 4 black
Wiring the Miniature laser and micro photoelectric sensors (M3 to M5, Panasonic EX)
Tighten the tiny nuts by hand only; the thin tubes bend easily. Never connect a PNP output straight to a 5V or 3.3V pin; it outputs the full supply voltage. Use a divider or an optocoupler input.
| Miniature laser and micro photoelectric sensors (M3 to M5, Panasonic EX) pin | Connection | Note |
|---|---|---|
| Brown | 24V + | Same supply ground as the controller |
| Blue | 0V | Common with Arduino GND |
| Black (NPN) | Arduino D2 with INPUT_PULLUP | Open collector pulls the pin LOW |
| Black (PNP) | 10k / 2.2k divider to D2 | About 4.3V at 24V |
- Brown
- Connection:
- 24V +
- Note:
- Same supply ground as the controller
- Blue
- Connection:
- 0V
- Note:
- Common with Arduino GND
- Black (NPN)
- Connection:
- Arduino D2 with INPUT_PULLUP
- Note:
- Open collector pulls the pin LOW
- Black (PNP)
- Connection:
- 10k / 2.2k divider to D2
- Note:
- About 4.3V at 24V
Example code
For a PNP sensor, read through a divider or optocoupler and count the rising edge instead of the falling edge.
// Sensor powered from 24V, blue wire to Arduino GND.
// NPN open-collector output (black) to D2.
const int SENSOR = 2;
bool last = HIGH;
unsigned long count = 0;
void setup() {
Serial.begin(9600);
pinMode(SENSOR, INPUT_PULLUP);
}
void loop() {
bool now = digitalRead(SENSOR);
if (last == HIGH && now == LOW) { // object arrived
count++;
Serial.print("Object detected, count = ");
Serial.println(count);
}
last = now;
delay(2);
}Setup and tuning
most run on 12 to 24 V DC.
check NPN or PNP and light-on or dark-on before wiring to a PLC.
use an optocoupler or divider for 3.3 or 5 V boards.
use the visible spot to aim at the target or reflector.
Class 1 or 2 lasers; never look into the beam.
What you need
Shop this list17 of 18 found in our store · ₹45,561
Generic M3 FTD-03NO 30mm Laser Diffuse Photoelectric Switch – M4 Thread, 10-30V DC: the part this guide coversM3 FTD-03NO 30mm Laser Diffuse Photoelectric Switch – M4 Thread, 10-30V DC₹2,529
Generic M3 LTD-03NO 30mm Laser Micro Diffuse Photoelectric Switch – Visible Light, Stainless Steel Pipe: another version this guide coversM3 LTD-03NO 30mm Laser Micro Diffuse Photoelectric Switch – Visible Light, Stainless Steel Pipe₹3,199
Generic M4 FTD-04NO 50mm Laser Micro Diffuse Photoelectric Switch – Stainless Steel Housing: another version this guide coversM4 FTD-04NO 50mm Laser Micro Diffuse Photoelectric Switch – Stainless Steel Housing₹1,099
Generic M4 FTD-04NO Laser Micro Diffuse Photoelectric Switch – 70mm Range, 10-30V DC: another version this guide coversM4 FTD-04NO Laser Micro Diffuse Photoelectric Switch – 70mm Range, 10-30V DC₹1,659
M4 LTD-04NO 50mm Laser Micro Diffuse Photoelectric Switch – Visible Laser, Stainless Steel Pipe: another version this guide coversM4 LTD-04NO 50mm Laser Micro Diffuse Photoelectric Switch – Visible Laser, Stainless Steel Pipe₹2,439
Generic M4 LTD-04NO Laser Micro Photoelectric Switch Visible Laser 50-70mm Detection – M4 Thread: another version this guide coversM4 LTD-04NO Laser Micro Photoelectric Switch Visible Laser 50-70mm Detection – M4 Thread₹1,779
M5 FTD-05NO 100mm Laser Micro Photoelectric Switch – Diffuse Reflective, M4 Thread, Stainless Steel Pipe: another version this guide coversM5 FTD-05NO 100mm Laser Micro Photoelectric Switch – Diffuse Reflective, M4 Thread, Stainless Steel Pipe₹1,869
Generic M5 FTD-05NO 130mm Diffuse Photoelectric Sensor – Stainless Steel Pipe, 10-30V DC: another version this guide coversM5 FTD-05NO 130mm Diffuse Photoelectric Sensor – Stainless Steel Pipe, 10-30V DC₹1,509
Generic M5 LTD-05NO 130mm Laser Micro Diffuse Photoelectric Switch – Stainless Steel: another version this guide coversM5 LTD-05NO 130mm Laser Micro Diffuse Photoelectric Switch – Stainless Steel₹2,069
M5 LTD-05NO Visible Laser Diffuse Photoelectric Switch – 10-30V DC, 50-100mm Range: another version this guide coversM5 LTD-05NO Visible Laser Diffuse Photoelectric Switch – 10-30V DC, 50-100mm Range₹2,989
Panasonic EX-11A Photoelectric Sensor, 150mm Range, ø1mm Detection, NPN Open Collector Output: another version this guide coversPanasonic EX-11A Photoelectric Sensor, 150mm Range, ø1mm Detection, NPN Open Collector Output₹2,249
Panasonic EX-11AD Photoelectric Sensor, Range: 150 mm, IP67, 2m Cable: another version this guide coversPanasonic EX-11AD Photoelectric Sensor, Range: 150 mm, IP67, 2m Cable₹3,119
Panasonic EX-13EB Photoelectric Sensor, 500mm Range, NPN Output, IP67, Cable Connection: another version this guide coversPanasonic EX-13EB Photoelectric Sensor, 500mm Range, NPN Output, IP67, Cable Connection₹5,559
Panasonic EX-14A Photoelectric Sensor, Reflective, 2mm to 25mm Range, NPN Output, IP67, Cable Connection: another version this guide coversPanasonic EX-14A Photoelectric Sensor, Reflective, 2mm to 25mm Range, NPN Output, IP67, Cable Connection₹2,089
Panasonic EX-L261 Photoelectric Sensor, Range: 20 mm to 50 mm, NPN Output, Cable Connection: another version this guide coversPanasonic EX-L261 Photoelectric Sensor, Range: 20 mm to 50 mm, NPN Output, Cable Connection₹8,909
Panasonic FX-101 Photoelectric Sensor – 350mm Sensing, NPN Output, Connector: another version this guide coversPanasonic FX-101 Photoelectric Sensor – 350mm Sensing, NPN Output, Connector₹2,319- 24V switching power supply board: to power 12-24V industrial sensors on the benchFind this part
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- Branded photoelectric sensors: standard sizes.
- Photointerrupters and slot sensors: fork sensors for tabs and edges.
- Photoelectric sensors explained: types.
Common mistakes to avoid
- Wiring 24 V outputs straight to a microcontroller.
- Choosing the wrong NPN or PNP type.
- Aiming straight at shiny surfaces.
- Looking into the laser beam.
Frequently asked questions
Why use a laser photoelectric sensor?
The small, bright spot detects tiny parts and precise positions that LED sensors miss.
Can I connect it to an Arduino?
Yes, through an optocoupler or divider because it runs at 12 to 24 V.
What is background suppression?
A mode that ignores anything beyond a set distance, like the conveyor behind a part.
Why does it miss shiny parts?
Shiny surfaces reflect the beam away; angle the sensor slightly.
Is the laser safe for eyes?
Class 1 is safe; Class 2 is safe for brief exposure but never stare into it.
Parts for this guide
- ₹2,529View
- ₹3,199View
- ₹1,099View
- ₹1,659View
- ₹2,439View
- ₹1,779View
M5 FTD-05NO 100mm Laser Micro Photoelectric Switch – Diffuse Reflective, M4 Thread, Stainless Steel Pipe₹1,869View- ₹1,509View
- ₹2,069View
- ₹2,989View
- ₹2,249View
- ₹3,119View
- ₹5,559View
Panasonic EX-14A Photoelectric Sensor, Reflective, 2mm to 25mm Range, NPN Output, IP67, Cable Connection₹2,089View- ₹8,909View
- ₹2,319View
- ₹411View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

