Component guide · Beginner · 5 min read
Nextion HMI Touch Displays

Basic, Discovery, Enhanced, Intelligent and Edge Series from 2.1 to 10.1 Inch, Resistive and Capacitive, With Acrylic Cases
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Nextion HMI displays draw their own buttons, gauges and pages, so your Arduino or ESP32 only sends short text commands over UART. You design the screen in the free Nextion Editor and upload it from a microSD card or the serial port. Series differ in features: Basic is entry level, higher series add more memory and options.
Key specs at a glance
- Sizes
- 2.1 to 10.1 inch
- Series
- Basic, Discovery, Enhanced, Intelligent, Edge
- Touch
- Resistive or capacitive (R or C in the model code)
- Interface
- UART TTL, default 9600 baud
- Software
- Nextion Editor
- Options
- With or without enclosure; acrylic cases for Basic
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Acrylic Clear Transparent Case for Nextion Basic Touch Screen - 3.2 inch₹290
Option 2Nextion BASIC NX4827T043 - 4.3” TFT LCD ManMachine Interface HMI Kernel Touch Display₹5,789
Option 3Nextion BASIC NX4832T035-3.5" HMI TFT LCD Touch Display Module₹4,738
Option 4Nextion BASIC NX8048T050 - 5.0" LCD TFT HMI Touch Display₹7,332
Option 5Nextion BASIC NX8048T070 7.0" HMI TFT LCD Touch Display₹10,901
Option 6Acrylic Clear Transparent Case for Nextion Basic Touch Screen - 3.5 inch₹720
What the Nextion HMI touch displays (Basic, Enhanced, Intelligent, Discovery and Edge) is
Nextion moves the user interface into the display. In the Nextion Editor you drag in buttons, text boxes, sliders and graphs, then upload the project. At run time the host sends commands such as t0.txt="Hello" followed by three 0xFF bytes, and the display sends back events when you touch something.
Model codes help you choose: NX4827 is 4.3 inch 480x272, NX8048 is 800x480 in 5 or 7 inch, and the ending shows whether touch is resistive or capacitive. A -Y suffix usually means the model comes with an enclosure. Read the series notes in the listing for features such as extra memory or GPIO.
Nextion HMI touch displays (Basic, Enhanced, Intelligent, Discovery and Edge) pinout
The pins on the Nextion HMI touch displays (Basic, Enhanced, Intelligent, Discovery and Edge) and what each one does.
| Pin | Function |
|---|---|
| 5V / VCC | Power (check the model's range) |
| GND | Ground |
| TX | Serial out to the controller |
| RX | Serial in from the controller |
- 5V / VCC
- Power (check the model's range)
- GND
- Ground
- TX
- Serial out to the controller
- RX
- Serial in from the controller
Wiring the Nextion HMI touch displays (Basic, Enhanced, Intelligent, Discovery and Edge)
Power the display from a stable 5 V supply (larger models can draw several hundred milliamps). Connect TX to RX and RX to TX.
| Nextion HMI touch displays (Basic, Enhanced, Intelligent, Discovery and Edge) pin | Arduino Uno | ESP32 |
|---|---|---|
| 5V | 5V | 5V |
| GND | GND | GND |
| Display TX | D2 (SoftwareSerial RX) | GPIO 16 (RX2) |
| Display RX | D3 (SoftwareSerial TX) | GPIO 17 (TX2) |
- 5V
- Arduino Uno:
- 5V
- ESP32:
- 5V
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- Display TX
- Arduino Uno:
- D2 (SoftwareSerial RX)
- ESP32:
- GPIO 16 (RX2)
- Display RX
- Arduino Uno:
- D3 (SoftwareSerial TX)
- ESP32:
- GPIO 17 (TX2)
Example code
Every Nextion command ends with three 0xFF bytes. Set object names in the Nextion Editor and use them in commands.
void setup() {
Serial.begin(9600); // HMI displays commonly default to 9600 baud
}
void loop() {
// Nextion-style text command: set object t0 to "Hello", end with three 0xFF bytes
Serial.print("t0.txt=\"Hello\"");
Serial.write(0xFF); Serial.write(0xFF); Serial.write(0xFF);
delay(1000);
}Setup and tuning
build the pages in Nextion Editor, then upload via microSD or serial.
use a supply with headroom; a weak 5 V line causes resets on larger screens.
default is 9600; raise it in the project for faster updates.
enable Send Component ID on touch events so the host can react to presses.
What you need
Shop this list20 of 20 found in our store · ₹1,59,794
Acrylic Clear Transparent Case for Nextion Basic Touch Screen - 3.2 inch: the part this guide coversAcrylic Clear Transparent Case for Nextion Basic Touch Screen - 3.2 inch₹290
Nextion BASIC NX4827T043 - 4.3” TFT LCD ManMachine Interface HMI Kernel Touch Display: another version this guide coversNextion BASIC NX4827T043 - 4.3” TFT LCD ManMachine Interface HMI Kernel Touch Display₹5,789
Nextion BASIC NX4832T035-3.5" HMI TFT LCD Touch Display Module: another version this guide coversNextion BASIC NX4832T035-3.5" HMI TFT LCD Touch Display Module₹4,738
Nextion BASIC NX8048T050 - 5.0" LCD TFT HMI Touch Display: another version this guide coversNextion BASIC NX8048T050 - 5.0" LCD TFT HMI Touch Display₹7,332
Nextion BASIC NX8048T070 7.0" HMI TFT LCD Touch Display: another version this guide coversNextion BASIC NX8048T070 7.0" HMI TFT LCD Touch Display₹10,901
Acrylic Clear Transparent Case for Nextion Basic Touch Screen - 3.5 inch: another version this guide coversAcrylic Clear Transparent Case for Nextion Basic Touch Screen - 3.5 inch₹720
Nextion Intelligent NX1060P101-011C-I 10.1" HMI Capacitive Touch Display: another version this guide coversNextion Intelligent NX1060P101-011C-I 10.1" HMI Capacitive Touch Display₹15,869
Nextion Intelligent NX1060P101-011R-I 10.1" HMI Resistive Touch Display: another version this guide coversNextion Intelligent NX1060P101-011R-I 10.1" HMI Resistive Touch Display₹16,886
Nextion Enhanced NX8048K070-011C 7.0" HMI Capacitive Touch Display with enclosure: another version this guide coversNextion Enhanced NX8048K070-011C 7.0" HMI Capacitive Touch Display with enclosure₹13,282
Nextion Enhanced NX8048K070-011R 7.0" HMI Resistive Touch Display with enclosure: another version this guide coversNextion Enhanced NX8048K070-011R 7.0" HMI Resistive Touch Display with enclosure₹11,332
Nextion Intelligent NX8048P070-011C-Y 7.0" HMI Capacitive Touch Display with enclosure: another version this guide coversNextion Intelligent NX8048P070-011C-Y 7.0" HMI Capacitive Touch Display with enclosure₹10,436
Nextion Intelligent NX8048P050-011R 5.0" HMI Resistive Touch Display: another version this guide coversNextion Intelligent NX8048P050-011R 5.0" HMI Resistive Touch Display₹6,715
Nextion Intelligent NX8048P050011CY HMI 5.0" Capacitive Touch Display with Enclosure: another version this guide coversNextion Intelligent NX8048P050_011C_Y HMI 5.0" Capacitive Touch Display with Enclosure₹8,506
Nextion Intelligent NX4827P043-011R 4.3" HMI Resistive Touch Display: another version this guide coversNextion Intelligent NX4827P043-011R 4.3" HMI Resistive Touch Display₹5,561
Nextion Intelligent NX4827P043-011R-Y 4.3″ HMI Resistive Touch Display with enclosure: another version this guide coversNextion Intelligent NX4827P043-011R-Y 4.3″ HMI Resistive Touch Display with enclosure₹6,944
Nextion Intelligent NX8048P050011RY HMI 5.0" Resistive Touch Display with enclosure383083: another version this guide coversNextion Intelligent NX8048P050_011R_Y HMI 5.0" Resistive Touch Display with enclosure383083₹7,968
Nextion Intelligent NX8048P070-011R 7.0" HMI Resistive Touch Display: another version this guide coversNextion Intelligent NX8048P070-011R 7.0" HMI Resistive Touch Display₹9,998
Nextion Intelligent NX8048P070-011R-Y 7.0" HMI Resistive Touch Display with enclosure: another version this guide coversNextion Intelligent NX8048P070-011R-Y 7.0" HMI Resistive Touch Display with enclosure₹10,192
Nextion Discovery NX3224F024 2.4" Resistive Touch Display: another version this guide coversNextion Discovery NX3224F024 2.4" Resistive Touch Display₹2,277
Nextion Edge Series NX4848E021-011C 2.1inch 480X480 HMI UART TFT IPS Round Circular LCD Display: another version this guide coversNextion Edge Series NX4848E021-011C 2.1inch 480X480 HMI UART TFT IPS Round Circular LCD Display₹4,058
Alternatives and when to choose them
- DWIN HMI displays: another serial HMI family.
- ILI9341 TFT displays: when you want to draw everything from code.
- Waveshare HDMI displays: when a computer drives the screen.
Common mistakes to avoid
- Forgetting the three 0xFF bytes after each command.
- Powering the display from a weak 5 V pin.
- Not naming objects in the editor before using them in code.
- Mixing up resistive and capacitive models.
Frequently asked questions
Do I need to draw graphics from code?
No, you design the screen in Nextion Editor and send short text commands.
What baud rate does it use?
9600 by default; you can raise it in the project settings.
How do I upload a project?
Via microSD card or the serial port using Nextion Editor.
What does the Y suffix mean?
Models ending in Y usually come with an enclosure.
Can an ESP32 drive it?
Yes, use a hardware UART at 3.3 V; the Nextion TX works at that level.
Parts for this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




