Component guide · Beginner · 4 min read
Offline Speech Recognition Modules

LD3320 and LD3320A, SU-03T, Voice Recognition Module V3, Grove Speech Recognizer and Heelight, DFRobot Gravity Voice Learning Sensor
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These modules recognise spoken commands without the internet. You say a wake word and a short command such as 'light on', and the module sends a number over UART or I2C, or toggles a pin. The LD3320 and SU-03T use fixed or programmed keyword lists, the Voice Recognition V3 learns your own voice, and the DFRobot sensor can learn new words on the board. They suit lamps, fans and robots.
Key specs at a glance
- Recognition
- Offline, keyword based, no cloud
- Interface
- UART (most), I2C (DFRobot, Grove), SPI (LD3320)
- Commands
- About 7 to 150 depending on module
- Supply
- 3.3V to 5V
- Microphone
- Onboard or included electret mic
- Speaker
- SU-03T and DFRobot drive a small speaker for replies
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1DFRobot Gravity Offline Language Learning Voice Recognition Sensor – I2C & UART Module₹1,899
Option 2HS-S57-L SU03T Speech Recognition Module – PH2.0 4P Interface₹1,029
Option 3LD3320 Speech Recognition Module Serial/SPI Interface, Intelligent Voice Control Development Board, TTL Programming Board₹175
Option 4LD3320A SPI Speech Recognition Module₹634
Option 5LD3320A Serial Port Speech Recognition Module – TTL Interface₹663
Option 6SU-03T1 Intelligent Offline Voice Recognition Module – 3.3-5V DC, 115200 Baud₹259
What the Offline speech recognition modules: LD3320, SU-03T, Voice Recognition V3, Grove and DFRobot is
Offline speech recognition modules such as the VC-02, SU-03T and DFRobot DF2301Q recognise a fixed list of voice commands on the module itself, with no internet.
Pick by how you want to set the words. The SU-03T is set up with the maker's online tool that builds a firmware with your wake word and commands, then you flash it once. The LD3320 takes keyword lists in pinyin-style spelling from the microcontroller at start-up. The Voice Recognition V3 records your own voice samples, so it works in any language but mainly for the person who trained it. The DFRobot Gravity sensor has fixed English commands plus a few it can learn.
Speak 30 to 100 cm from the mic in a quiet room. Fans and music cut accuracy a lot, so test in the real place.
Offline speech recognition modules: LD3320, SU-03T, Voice Recognition V3, Grove and DFRobot pinout
The pins on the Offline speech recognition modules: LD3320, SU-03T, Voice Recognition V3, Grove and DFRobot and what each one does.
| Pin | Function |
|---|---|
| VCC | 3.3V or 5V by module |
| GND | Ground |
| TX / RX | UART to the microcontroller |
| SDA / SCL | I2C on DFRobot and Grove |
| SPK+ / SPK- | Small speaker on SU-03T and DFRobot |
- VCC
- 3.3V or 5V by module
- GND
- Ground
- TX / RX
- UART to the microcontroller
- SDA / SCL
- I2C on DFRobot and Grove
- SPK+ / SPK-
- Small speaker on SU-03T and DFRobot
Wiring the Offline speech recognition modules: LD3320, SU-03T, Voice Recognition V3, Grove and DFRobot
Keep the microphone away from motors and relays, and power the module from a clean supply.
| Offline speech recognition modules: LD3320, SU-03T, Voice Recognition V3, Grove and DFRobot pin | Arduino | Note |
|---|---|---|
| VCC | 5V | 3.3V on LD3320 logic |
| GND | GND | Common ground |
| TX | Arduino pin 2 (SoftwareSerial RX) | UART modules |
| RX | Arduino pin 3 | Use a divider for 3.3V modules |
| SDA / SCL | A4 / A5 | I2C modules |
- VCC
- Arduino:
- 5V
- Note:
- 3.3V on LD3320 logic
- GND
- Arduino:
- GND
- Note:
- Common ground
- TX
- Arduino:
- Arduino pin 2 (SoftwareSerial RX)
- Note:
- UART modules
- RX
- Arduino:
- Arduino pin 3
- Note:
- Use a divider for 3.3V modules
- SDA / SCL
- Arduino:
- A4 / A5
- Note:
- I2C modules
Example code
The byte each command sends is set in the module's configuration tool or library; print the codes first, then map them.
#include <SoftwareSerial.h>
SoftwareSerial voice(2, 3); // RX, TX
const int LAMP = 8;
void setup() {
pinMode(LAMP, OUTPUT);
Serial.begin(9600);
voice.begin(9600); // SU-03T default is often 115200; match your firmware
}
void loop() {
if (voice.available()) {
int cmd = voice.read(); // command code set in the module's firmware or tool
Serial.println(cmd);
if (cmd == 0x01) digitalWrite(LAMP, HIGH);
if (cmd == 0x02) digitalWrite(LAMP, LOW);
}
}Setup and tuning
connect power (often 5 V), a microphone and speaker, and UART TX/RX to your microcontroller.
set the wake word and commands in the vendor's online tool and flash new firmware.
the module sends a code over UART or toggles pins when it hears a command.
use the stated speaker size for voice replies.
keep the mic away from fans and motors.
What you need
Shop this list9 of 9 found in our store · ₹9,870
DFRobot Gravity Offline Language Learning Voice Recognition Sensor – I2C & UART Module: the part this guide coversDFRobot Gravity Offline Language Learning Voice Recognition Sensor – I2C & UART Module₹1,899
HS-S57-L SU03T Speech Recognition Module – PH2.0 4P Interface: another version this guide coversHS-S57-L SU03T Speech Recognition Module – PH2.0 4P Interface₹1,029
LD3320 Speech Recognition Module Serial/SPI Interface, Intelligent Voice Control Development Board, TTL Programming Board: another version this guide coversLD3320 Speech Recognition Module Serial/SPI Interface, Intelligent Voice Control Development Board, TTL Programming Board₹175
LD3320A SPI Speech Recognition Module: another version this guide coversLD3320A SPI Speech Recognition Module₹634
LD3320A Serial Port Speech Recognition Module – TTL Interface: another version this guide coversLD3320A Serial Port Speech Recognition Module – TTL Interface₹663
SU-03T1 Intelligent Offline Voice Recognition Module – 3.3-5V DC, 115200 Baud: another version this guide coversSU-03T1 Intelligent Offline Voice Recognition Module – 3.3-5V DC, 115200 Baud₹259
Seeed Studio Studio Grove Heelight Sensor – Digital Voice Recognition Module: another version this guide coversSeeed Studio Grove Heelight Sensor – Digital Voice Recognition Module₹713Closest match, check the specs
Seeed Studio Studio Grove Speech Recognizer Module – Local Voice Recognition, I2C Interface: another version this guide coversSeeed Studio Grove Speech Recognizer Module – Local Voice Recognition, I2C Interface₹2,199Closest match, check the specs
Generic Voice Recognition Module V3 – UART/GPIO Interface, Microphone Included: another version this guide coversVoice Recognition Module V3 – UART/GPIO Interface, Microphone Included₹2,299
Alternatives and when to choose them
- Voice and sound playback modules: record and play messages.
- ESP32-S3 AI voice boards: cloud and on-device voice assistants.
- Sound sensor modules: detect claps and loud sounds.
Common mistakes to avoid
- Expecting full sentences to be understood.
- Mounting the mic near noise.
- Wrong baud rate.
- Using an unsupported language.
Frequently asked questions
Do these modules need internet?
No. Recognition runs offline on the module itself.
Can I add my own commands?
Yes. Make a new firmware with the vendor's tool and flash it to the module.
Why does it miss commands?
Background noise or the user is too far from the mic.
Can it understand Hindi?
Some modules support Chinese and English only; check language support.
How do I connect it to Arduino?
Read the command codes it sends over UART and act on each one.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
