Component guide · Beginner · 3 min read
Raspberry Pi Pico Add-On Boards

Cytron Maker Pi Pico Mini, Terminal Block, Crowtail Shield, GPIO Expander, DC Motor, Isolated Relay, CAN, NB-IoT and LiPo SHIM
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The Raspberry Pi Pico is small and cheap, and these boards make it easier to build with. The Maker Pi Pico Mini adds LEDs, a buzzer and Grove ports; the terminal block board and Crowtail shield take sensor wires and modules; and plug-in modules add DC motors, isolated relays, CAN bus, NB-IoT and a LiPo battery. The RP2040 power HAT manages power for a Raspberry Pi.
Key specs at a glance
- Board
- Raspberry Pi Pico, Pico W, Pico 2 (same pinout)
- Add-ons
- Motor, relay, CAN, NB-IoT, GPIO expander, battery
- Mounting
- Pico sockets on top or stack underneath
- Logic
- 3.3V
- Languages
- MicroPython, C/C++, Arduino
- Power
- USB or LiPo (LiPo SHIM)
A shorted, over-charged or damaged lithium cell can get very hot and catch fire. Use a protection board or BMS, never short the terminals, charge on a non-flammable surface and do not leave a charging pack alone. Throw away cells that are swollen or dented.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Cytron Maker Pi Pico Mini (Without Pico Board)₹1,232
Option 2DFRobot Terminal Block Board for Raspberry Pi Pico₹2,339
Option 3Elecrow Crowtail Shield for Raspberry Pi Pico RP2040₹269
Option 4Waveshare GPIO Expander for Raspberry Pi Pico₹649
Option 5Waveshare DC Motor Driver Module for Raspberry Pi Pico₹1,919
Option 6Waveshare Industrial Isolated Relay Module₹4,450
What the Raspberry Pi Pico add-on and expansion boards is
Raspberry Pi Pico add-on boards include breakouts, motor drivers, displays, sensors and expansion bases that plug onto the Pico's headers for quick projects.
Pico modules from Waveshare use the same pin layout, so the Pico plugs straight in. The isolated relay module switches 8 loads; the CAN module uses an MCP2515 over SPI; the SIM7020E module sends small NB-IoT messages.
The RP2040 Power Management HAT is for a Raspberry Pi (not the Pico): it uses an RP2040 to switch the Pi on and off on a schedule.
Raspberry Pi Pico add-on and expansion boards pinout
The pins on the Raspberry Pi Pico add-on and expansion boards and what each one does.
| Pin | Function |
|---|---|
| GP0 to GP28 | Pico GPIO on every module |
| VSYS / VBUS | Power in and USB 5V |
| 3V3 | 3.3V out, 300 mA |
| GND | Several ground pins |
- GP0 to GP28
- Pico GPIO on every module
- VSYS / VBUS
- Power in and USB 5V
- 3V3
- 3.3V out, 300 mA
- GND
- Several ground pins
Wiring the Raspberry Pi Pico add-on and expansion boards
Put the Pico in the right way round; the silkscreen shows where the USB end goes. Power motors and relay loads separately from the Pico's USB.
| Raspberry Pi Pico add-on and expansion boards pin | Connection | Note |
|---|---|---|
| Pico | Socket into the board with USB at the marked end | Check pin 1 |
| Motors / relays | Screw terminals | External supply for loads |
| Sensors | Grove, Crowtail or terminal block | 3.3V sensors |
- Pico
- Connection:
- Socket into the board with USB at the marked end
- Note:
- Check pin 1
- Motors / relays
- Connection:
- Screw terminals
- Note:
- External supply for loads
- Sensors
- Connection:
- Grove, Crowtail or terminal block
- Note:
- 3.3V sensors
Example code
Pin numbers differ by board; check the silkscreen. Waveshare Pico modules include MicroPython and C examples in their wiki.
from machine import Pin, PWM
import time
led = Pin(0, Pin.OUT)
buzzer = PWM(Pin(22))
while True:
led.toggle()
buzzer.freq(880)
buzzer.duty_u16(20000)
time.sleep(0.1)
buzzer.duty_u16(0)
time.sleep(0.9)Setup and tuning
match the USB end with the board marking when plugging the Pico in.
Pico pins are 3.3 V; check add-ons are 3.3 V compatible.
use MicroPython or C libraries from the board maker.
motor and LED boards need their own supply.
check pins used by each add-on before stacking.
What you need
Shop this list13 of 13 found in our store · ₹11,390
Cytron Maker Pi Pico Mini (Without Pico Board): the part this guide coversCytron Maker Pi Pico Mini (Without Pico Board)₹1,232
DFRobot Terminal Block Board for Raspberry Pi Pico: another version this guide coversRaspberry Pi Pico₹419
Elecrow Crowtail Shield for Raspberry Pi Pico RP2040: another version this guide coversElecrow Crowtail Shield for Raspberry Pi Pico RP2040₹269
Waveshare GPIO Expander for Raspberry Pi Pico: another version this guide coversRaspberry Pi Pico₹419
Waveshare DC Motor Driver Module for Raspberry Pi Pico: another version this guide coversRaspberry Pi Pico₹419
Waveshare Industrial Isolated Relay Module: another version this guide coversWaveshare Industrial Isolated Relay Module₹4,450
Waveshare CAN Bus Module (B) for Raspberry Pi Pico: another version this guide coversRaspberry Pi Pico₹419
Waveshare SIM7020E NB-IoT Module for Raspberry Pi Pico: another version this guide coversRaspberry Pi Pico₹419
Pimoroni LiPo/LiIon SHIM for Raspberry Pi Pico: another version this guide coversRaspberry Pi Pico₹419
Waveshare RP2040 Power Management HAT for Raspberry Pi: another version this guide coversWaveshare RP2040 Power Management HAT for Raspberry Pi₹2,389
Raspberry Pi Pico with headers: the board these add-ons takeRaspberry Pi Pico₹419
Solderless breadboard: to build without solderingSolderless Breadboard₹68
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Alternatives and when to choose them
- RP2040 boards: other RP2040 boards.
- MCP2515 CAN: CAN for any board.
- 5V relay modules: single relays.
Common mistakes to avoid
- Inserting the Pico backwards.
- Using 5 V signals.
- Pin conflicts.
- Powering motors from the Pico.
Frequently asked questions
Can I use 5 V sensors with Pico add-ons?
Only with level shifting; the Pico is 3.3 V.
Which language should I use?
MicroPython is easiest for beginners; use C/C++ when you need more speed.
Why does my add-on not work?
The Pico is inserted the wrong way round, or two boards use the same pins.
Can I stack several boards?
Yes, as long as the boards do not use the same pins.
Do these add-ons work with Pico 2?
Most do, because the Pico 2 has the same pinout and 3.3 V logic.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




