Component guide · Beginner · 3 min read
Sonoff 4CH R3, 4CH PRO R3 and Dual R3

Multi-Channel Smart Switch Setup
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The Sonoff 4CH R3 and 4CH PRO R3 control four circuits from one Wi-Fi box, and the Dual R3 controls two with power metering on some versions. The 4CH PRO adds 433 MHz RF and dry-contact outputs, plus self-locking, inching (momentary) and interlock modes, which make it suitable for curtain and gate motors as well as lights.
Key specs at a glance
- Channels
- 4 (4CH R3, 4CH PRO R3), 2 (Dual R3)
- Load
- 10 A per channel, 15 A total (4CH); 15 A total (Dual R3)
- Modes
- Self-locking, inching (momentary 0.5 to 3600 s), interlock (4CH PRO)
- Contacts
- Live-switched (4CH), dry contact by jumper (4CH PRO)
- Wireless
- Wi-Fi; 433 MHz RF on 4CH PRO
- Mounting
- DIN rail
This part is often wired to 230 V mains. Do all wiring with the plug pulled out, keep mains wires inside a closed box with strain relief, add a fuse, and never touch the board while it is plugged in. If you are new to mains wiring, have an electrician check it before you switch on.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Sonoff 4CH R3 4-Channel AC Smart Switch₹2,369
Option 2Sonoff 4CH PRO R3 4-Channel Smart Switch WiFi 2.4GHz 10A₹3,539
Option 3Sonoff Dual R3 2-Channel Smart WiFi Relay Switch₹1,629
What the Sonoff 4CH and Dual is
Interlock mode lets only one channel be on at a time, which is how a two-wire curtain or shutter motor is driven up and down safely. Inching mode closes a contact for a set time, like pressing a gate or garage button.
Dry-contact mode on the 4CH PRO switches anything, including low-voltage signals, because the relay contacts are isolated from the board's mains supply.
Sonoff 4CH and Dual pinout
The pins on the Sonoff 4CH and Dual and what each one does.
| Pin | Function |
|---|---|
| L / N in | Board supply |
| Channel outputs 1 to 4 | Switched live (or dry COM/NO on 4CH PRO) |
| Buttons | Per channel; hold channel 1 to pair |
| Jumpers (4CH PRO) | Select dry contact or live output per channel |
- L / N in
- Board supply
- Channel outputs 1 to 4
- Switched live (or dry COM/NO on 4CH PRO)
- Buttons
- Per channel; hold channel 1 to pair
- Jumpers (4CH PRO)
- Select dry contact or live output per channel
Wiring the Sonoff 4CH and Dual
Mains wiring must be done with the power off, in a proper enclosure, with cable and a fuse or MCB rated for the load. If you are not sure, have a qualified electrician install it. For curtain and gate motors, follow the motor maker's wiring and always use interlock so both directions are never on together.
| Sonoff 4CH and Dual pin | 4CH / 4CH PRO | Dual R3 |
|---|---|---|
| Supply | L and N in | L and N in |
| Light circuits | Out 1 to 4 to each light | Out 1 to 2 |
| Curtain motor | Out 1 = open, Out 2 = close, interlock on | Not used |
- Supply
- 4CH / 4CH PRO:
- L and N in
- Dual R3:
- L and N in
- Light circuits
- 4CH / 4CH PRO:
- Out 1 to 4 to each light
- Dual R3:
- Out 1 to 2
- Curtain motor
- 4CH / 4CH PRO:
- Out 1 = open, Out 2 = close, interlock on
- Dual R3:
- Not used
Example code
In Tasmota, the 4CH PRO's interlock is set with Interlock 1,2 and PulseTime for inching.
1. Open the device in eWeLink, Settings.
2. Choose Working mode: Interlock.
3. Name channel 1 "Open" and channel 2 "Close".
4. Optional: set Inching for each to the motor's full travel time (for example 20 s).
5. Test with the curtain half open before relying on the end positions.Setup and tuning
the 4CH board has a shared feed; keep the total under its rating.
on the 4CH PRO, move the jumpers before power-up and wire each channel's COM/NO.
pair a 433 MHz remote per channel on the 4CH PRO.
label each channel in the DB for safe maintenance.
What you need
Shop this list6 of 7 found in our store · ₹30,903
Sonoff 4CH R3 4-Channel AC Smart Switch: the part this guide coversSonoff 4CH R3 4-Channel AC Smart Switch₹2,369
Sonoff 4CH PRO R3 4-Channel Smart Switch WiFi 2.4GHz 10A: another version this guide coversSonoff 4CH PRO R3 4-Channel Smart Switch WiFi 2.4GHz 10A₹3,539
Sonoff Dual R3 2-Channel Smart WiFi Relay Switch: another version this guide coversSonoff Dual R3 2-Channel Smart WiFi Relay Switch₹1,629
Home Assistant Green smart home hub: to control the switches locallyHome Assistant Green Smart Home Hub₹23,149
433MHz 4-button remote: an extra remote to pairHelical Spring Coil Antenna₹40- Fuse holder: to fuse the switched circuitFind this part
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- Sonoff BASIC and MINI: single-channel switches.
- ESP8266 Wi-Fi relay boards: DIY multi-channel boards.
- Relay modules: relay boards for microcontrollers.
Common mistakes to avoid
- Running a curtain motor without interlock.
- Exceeding the total board current.
- Switching low-voltage circuits without dry-contact mode.
- Forgetting the jumper change needs power off.
Frequently asked questions
Can it control curtain motors?
Yes, two channels in interlock mode per motor.
What is inching?
A momentary on for a set time, like pressing a button.
Does the 4CH work with Alexa?
Yes, each channel appears as a separate switch.
Can it switch 12 V or 24 V circuits?
The 4CH PRO in dry-contact mode can.
Does the Dual R3 measure power?
The Dual R3 measures power per channel on versions with metering.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


