Component guide · Beginner · 4 min read
SWYAM Smart Home

16A Mini and 2-Gang Wi-Fi Switches, Retrofit Touch Panel, 30A Switch Modules, Self-Powered Kinetic RF Switches (1, 2 and 3 Gang), Wi-Fi+RF433 Switch, ESP8266 Fan Speed Controller PCBs, Pump Controllers, Ball Valve Controller and Door Window Sensor
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
SWYAM devices make ordinary Indian wiring smart. Mini switch modules fit behind an existing switchboard and keep the old switch working; 30A modules handle geysers and ACs. Kinetic switches need no battery: pressing them generates the power to send a 433MHz signal to a receiver. Fan speed controller boards replace a regulator, and the pump and valve controllers automate tanks and garden watering. Several work locally with Home Assistant.
Key specs at a glance
- Load
- 16A mini and 2-gang, 30A modules, pump controller up to 5HP single phase
- Wireless
- 2.4 GHz Wi-Fi; RF 433MHz on kinetic models
- Control
- App, Alexa, Google Assistant; Home Assistant local on some
- Fan controller
- ESP8266, multiple speed steps
- Kinetic switch
- Self-powered, no battery
- Supply
- 230V AC
This part can carry many amps. Use wire thick enough for the current, put a fuse close to the battery, check that connectors are rated for the load and give drivers and motors room to cool. A short at these currents melts wires in seconds.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SWYAM 2-Gang WiFi Smart Switch 16A Load₹999
Option 2SWYAM 2-Gang WiFi Smart Switch 16A Retrofit Touch Panel₹1,049
Option 3SWYAM 30A Smart WiFi Switch Module for Alexa & Google Assistant₹1,179
Option 4SWYAM ESP8266 WiFi Fan Speed Controller PCB for Home Assistant₹899
Option 5SWYAM Home Assistant 30A Smart WiFi Switch | Local Control₹1,249
Option 6SWYAM Mini 2-Way WiFi Smart Switch, 16A Load, Alexa/Google₹799
What the SWYAM Wi-Fi smart switches, kinetic RF switches, fan, pump and valve controllers is
Swyam Wi-Fi smart switches and controllers are smart home devices that switch lights, fans and appliances from a phone app, voice assistant or schedule.
All mains devices must be installed by someone competent with the supply switched off at the MCB. Mini modules go in the switch box: line and neutral in, load out, and the existing switch wired to the S terminals so it still works.
For the kinetic switches, pair each button to its receiver by holding the receiver's learn button and pressing the switch. Keep the Wi-Fi signal strong at the switchboard; metal boxes weaken it. Size the module above the real load current, and use the 30A version for heaters, geysers and pumps.
SWYAM Wi-Fi smart switches, kinetic RF switches, fan, pump and valve controllers pinout
The pins on the SWYAM Wi-Fi smart switches, kinetic RF switches, fan, pump and valve controllers and what each one does.
| Pin | Function |
|---|---|
| L | Mains line in |
| N | Neutral |
| L-out / Load | To the appliance |
| S1 / S2 | Existing wall switch input |
| Learn button | Pairing on RF receivers |
- L
- Mains line in
- N
- Neutral
- L-out / Load
- To the appliance
- S1 / S2
- Existing wall switch input
- Learn button
- Pairing on RF receivers
Wiring the SWYAM Wi-Fi smart switches, kinetic RF switches, fan, pump and valve controllers
Turn off the MCB and test the wires are dead before touching them. Mains can kill.
| SWYAM Wi-Fi smart switches, kinetic RF switches, fan, pump and valve controllers pin | Connection | Note |
|---|---|---|
| L and N | From the switchboard | MCB off first |
| Load | Light, fan or socket | Within rated current |
| S terminals | Old wall switch | Keeps manual control |
- L and N
- Connection:
- From the switchboard
- Note:
- MCB off first
- Load
- Connection:
- Light, fan or socket
- Note:
- Within rated current
- S terminals
- Connection:
- Old wall switch
- Note:
- Keeps manual control
Example code
Fan controller PCBs based on ESP8266 can also run ESPHome or Tasmota firmware if you prefer full local control.
1. Switch off the MCB and fit the module in the switch box as per the leaflet.
2. Power on; the LED blinks fast for pairing.
3. Add the device in the maker's app on 2.4 GHz Wi-Fi.
4. Link the app to Alexa or Google Home if wanted.
5. For local control, add the Home Assistant compatible models using the integration named in the leaflet.
6. Test with the wall switch as well as the app.Setup and tuning
mains devices must be installed by a qualified electrician behind switchboards or in boxes.
use a 2.4 GHz network with good signal at the switch.
pair the device with the maker's app and name each switch.
stay within the rated load, especially for motors and ACs.
link with Alexa or Google Home in the app.
What you need
Shop this list16 of 16 found in our store · ₹21,435
SWYAM 2-Gang WiFi Smart Switch 16A Load: the part this guide coversSWYAM 2-Gang WiFi Smart Switch 16A Load₹999
SWYAM 2-Gang WiFi Smart Switch 16A Retrofit Touch Panel: another version this guide coversSWYAM 2-Gang WiFi Smart Switch 16A Retrofit Touch Panel₹1,049
SWYAM 30A Smart WiFi Switch Module for Alexa & Google Assistant: another version this guide coversSWYAM 30A Smart WiFi Switch Module for Alexa & Google Assistant₹1,179
SWYAM ESP8266 WiFi Fan Speed Controller PCB for Home Assistant: another version this guide coversSWYAM ESP8266 WiFi Fan Speed Controller PCB for Home Assistant₹899
SWYAM Home Assistant 30A Smart WiFi Switch | Local Control: another version this guide coversSWYAM Home Assistant 30A Smart WiFi Switch | Local Control₹1,249
SWYAM Mini 2-Way WiFi Smart Switch, 16A Load, Alexa/Google: another version this guide coversSWYAM Mini 2-Way WiFi Smart Switch, 16A Load, Alexa/Google₹799
SWYAM No Battery Self Powered Kinetic Wireless RF Switch 1 Gang 1 Receiver: another version this guide coversSWYAM No Battery Self Powered Kinetic Wireless RF Switch 1 Gang 1 Receiver₹1,054
SWYAM Self-Powered Kinetic RF Switch 2 Gang 2 Receiver: another version this guide coversSWYAM Self-Powered Kinetic RF Switch 2 Gang 2 Receiver₹1,475
SWYAM Self-Powered Kinetic Wireless RF Switch – 3 Gang 3 Receiver 433MHz: another version this guide coversSWYAM Self-Powered Kinetic Wireless RF Switch – 3 Gang 3 Receiver 433MHz₹1,949
SWYAM Smart Wi-Fi Valve Controller for 0.25/0.5/0.75/1 Inch Ball Valves: another version this guide coversSWYAM Smart Wi-Fi Valve Controller for 0.25/0.5/0.75/1 Inch Ball Valves₹3,254
SWYAM Smart WiFi Door Window Sensor w/ Smart Life App: another version this guide coversSWYAM Smart WiFi Door Window Sensor w/ Smart Life App₹914
SWYAM Smart WiFi Pump Controller for Home Assistant: another version this guide coversSWYAM Smart WiFi Pump Controller for Home Assistant₹1,799
SWYAM Wi-Fi Smart Mini Switch 16A | Home Assistant Compatible: another version this guide coversSWYAM Wi-Fi Smart Mini Switch 16A | Home Assistant Compatible₹849
SWYAM WiFi Fan Speed Controller PCB | ESP8266 | Alexa & Google: another version this guide coversSWYAM WiFi Fan Speed Controller PCB | ESP8266 | Alexa & Google₹879
SWYAM WiFi IoT Smart Pump Controller 5HP Single-Phase w/ App: another version this guide coversSWYAM WiFi IoT Smart Pump Controller 5HP Single-Phase w/ App₹1,824
SWYAM Wireless WiFi+RF433 Kinetic Switch 16A, 1 Gang, 2-Way: another version this guide coversSWYAM Wireless WiFi+RF433 Kinetic Switch 16A, 1 Gang, 2-Way₹1,264
Alternatives and when to choose them
- Sonoff smart switches: another popular range.
- MQTT and Home Assistant: local control.
- Smart home devices: plugs, hubs and sensors.
Common mistakes to avoid
- No neutral available.
- 5 GHz Wi-Fi.
- Overloading with motors.
- DIY mains wiring.
Frequently asked questions
Do smart switches need neutral wire?
Most smart switches need a neutral wire; check the model before buying.
Why will it not connect to Wi-Fi?
Use a 2.4 GHz network and check the signal strength and password.
Can it control a fan speed?
Only models with a built-in fan regulator can control fan speed.
Can I use it with Alexa?
Yes. Link the account in the app, then control it by voice.
Can I install it myself?
Mains wiring should be done by a qualified electrician.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
