Component guide · Advanced · 4 min read
NanoRadar Traffic Radars

TSR10, TSR18, TSR20, TSR40, TSC224 Speed and MR62, MR76S, TCR300, TCM863, TCM873 Flow
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Traffic radars measure vehicle speed, count vehicles and track lanes. The TSR10 suits a single lane; the TSR18, TSR40 and TSC224 cover several lanes; and the MR62, MR76S, TCR300, TCM863 and TCM873 track many targets for traffic flow out to 90 to 500 m. They mount on poles or gantries and output CAN, RS485 or Ethernet to a roadside controller.
Key specs at a glance
- Frequency
- 24 GHz, 60 GHz or 77 to 80 GHz FMCW
- Range
- 15 to 30 m (TSR10) up to 500 m (TCM873)
- Lanes
- 1 to 8 depending on model
- Targets
- Up to 32 or more tracked
- Output
- CAN, RS485, RS232 or Ethernet
- Protection
- IP66 or IP67
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1NanoRadar TSR10 Single Lane Speed Radar – 24GHz K-Band FMCW, 15-30m Range₹33,869
Option 2NanoRadar TSR18 Multi Lanes Speed Radar – 24GHz FMCW, 180m Range₹16,059
Option 3NanoRadar TSR20 Speed Detection Radar Module – IP66, 12V DC₹30,409
Option 4NanoRadar TSR40 Multi-Lane Speed Measuring Radar Module – 61GHz FMCW, 1-4 Lanes, 32 Targets₹53,499
Option 5NanoRadar TSC224 Traffic Speed Radar – 24GHz MIMO DBF, IP67, Multi-Lane₹53,499
Option 6NanoRadar MR62 Multi-Lane Speed Measuring Radar – 60GHz FMCW, 1-4 Lanes, 32 Targets, 90m Range₹26,999
What the Traffic speed and flow radars is
Traffic speed and flow radars measure vehicle speed, count and lane occupancy for traffic monitoring, smart poles and speed signs.
Speed radars report the speed of the main target; flow radars track many targets and give lane, position and speed for counting and queue detection.
Mounting height and angle decide accuracy. Use the maker's PC tool to set lanes and check tracking before connecting a controller.
Traffic speed and flow radars pinout
The pins on the Traffic speed and flow radars and what each one does.
| Pin | Function |
|---|---|
| Power | 12 V or 8 to 32 V DC |
| CAN H / L | CAN output |
| RS485 A / B | Serial output (some models) |
| Ethernet | Network output (some models) |
- Power
- 12 V or 8 to 32 V DC
- CAN H / L
- CAN output
- RS485 A / B
- Serial output (some models)
- Ethernet
- Network output (some models)
Wiring the Traffic speed and flow radars
Connect the Traffic speed and flow radars like this.
| Traffic speed and flow radars pin | Arduino Uno | ESP32 |
|---|---|---|
| Power + | 12 V supply + | 12 V supply + |
| Power - | Supply - and board GND | Supply - and board GND |
| CAN H | MCP2515 CANH | MCP2515 CANH |
| CAN L | MCP2515 CANL | MCP2515 CANL |
| MCP2515 CS / SCK / SI / SO / INT | D10 / D13 / D11 / D12 / D2 | GPIO 5 / 18 / 23 / 19 / 4 |
- Power +
- Arduino Uno:
- 12 V supply +
- ESP32:
- 12 V supply +
- Power -
- Arduino Uno:
- Supply - and board GND
- ESP32:
- Supply - and board GND
- CAN H
- Arduino Uno:
- MCP2515 CANH
- ESP32:
- MCP2515 CANH
- CAN L
- Arduino Uno:
- MCP2515 CANL
- ESP32:
- MCP2515 CANL
- MCP2515 CS / SCK / SI / SO / INT
- Arduino Uno:
- D10 / D13 / D11 / D12 / D2
- ESP32:
- GPIO 5 / 18 / 23 / 19 / 4
Example code
Decode frames with the NanoRadar protocol document; bit rate is usually 500 kbit/s.
// Dump CAN frames from a radar (autowp arduino-mcp2515 library)
#include <SPI.h>
#include <mcp2515.h>
MCP2515 can(10); // CS pin (ESP32: 5)
struct can_frame f;
void setup() {
Serial.begin(115200);
can.reset();
can.setBitrate(CAN_500KBPS, MCP_8MHZ); // radar bit rate and module crystal
can.setListenOnlyMode(); // listen first; switch to Normal to send config
}
void loop() {
if (can.readMessage(&f) == MCP2515::ERROR_OK) {
Serial.print(f.can_id, HEX); Serial.print(" [");
Serial.print(f.can_dlc); Serial.print("] ");
for (int i = 0; i < f.can_dlc; i++) { Serial.print(f.data[i], HEX); Serial.print(' '); }
Serial.println();
}
}Setup and tuning
mount on a pole beside or above the road at the angle in the manual.
usually 12 or 24 V DC, with surge protection outdoors.
read RS485, RS232 or Ethernet data into a controller or cloud.
set lanes, direction and detection zones with the vendor software.
check readings against a reference speed for calibration.
What you need
Shop this list15 of 15 found in our store · ₹5,59,128
NanoRadar TSR10 Single Lane Speed Radar – 24GHz K-Band FMCW, 15-30m Range: the part this guide coversNanoRadar TSR10 Single Lane Speed Radar – 24GHz K-Band FMCW, 15-30m Range₹33,869
NanoRadar TSR18 Multi Lanes Speed Radar – 24GHz FMCW, 180m Range: another version this guide coversNanoRadar TSR18 Multi Lanes Speed Radar – 24GHz FMCW, 180m Range₹16,059
NanoRadar TSR20 Speed Detection Radar Module – IP66, 12V DC: another version this guide coversNanoRadar TSR20 Speed Detection Radar Module – IP66, 12V DC₹30,409
NanoRadar TSR40 Multi-Lane Speed Measuring Radar Module – 61GHz FMCW, 1-4 Lanes, 32 Targets: another version this guide coversNanoRadar TSR40 Multi-Lane Speed Measuring Radar Module – 61GHz FMCW, 1-4 Lanes, 32 Targets₹53,499
NanoRadar TSC224 Traffic Speed Radar – 24GHz MIMO DBF, IP67, Multi-Lane: another version this guide coversNanoRadar TSC224 Traffic Speed Radar – 24GHz MIMO DBF, IP67, Multi-Lane₹53,499
NanoRadar MR62 Multi-Lane Speed Measuring Radar – 60GHz FMCW, 1-4 Lanes, 32 Targets, 90m Range: another version this guide coversNanoRadar MR62 Multi-Lane Speed Measuring Radar – 60GHz FMCW, 1-4 Lanes, 32 Targets, 90m Range₹26,999
NanoRadar MR76S 77GHz Traffic Flow Radar – CAN Interface, IP67: another version this guide coversNanoRadar MR76S 77GHz Traffic Flow Radar – CAN Interface, IP67₹42,499
NanoRadar TCR300 Traffic Flow Radar – 77GHz FMCW Radar Module, 300m Range, 12V DC: another version this guide coversNanoRadar TCR300 Traffic Flow Radar – 77GHz FMCW Radar Module, 300m Range, 12V DC₹34,329
NanoRadar TCR300 Traffic Flow Radar – 77GHz FMCW Radar Module, 8-32V DC: another version this guide coversNanoRadar TCR300 Traffic Flow Radar – 77GHz FMCW Radar Module, 8-32V DC₹98,699
NanoRadar TCM863 Traffic Flow Radar – 80GHz FMCW, 350m Range, 8-Lane Coverage, GPS/PTP Sync: another version this guide coversNanoRadar TCM863 Traffic Flow Radar – 80GHz FMCW, 350m Range, 8-Lane Coverage, GPS/PTP Sync₹84,529
NanoRadar TCM873 80GHz MMW Traffic Flow Radar Module – 500m Range, IP67: another version this guide coversNanoRadar TCM873 80GHz MMW Traffic Flow Radar Module – 500m Range, IP67₹74,299
NanoRadar USB to CAN adapter: the maker's adapter for its PC toolsNanoRadar USB to CAN Adapter – USB 2.0 to CAN BUS Converter₹7,909Closest match, check the specs
Waveshare USB to CAN adapter: to test CAN radars from a PCWaveshare USB to CAN Adapter₹2,124
MCP2515 CAN bus module (TJA1050): to read CAN radars from an Arduino or ESP32MCP2515 CAN Bus Module TJA1050 Transceiver SPI Arduino₹108Closest match, check the specs
SMPS power supply in metal enclosure (5/12/24 V): a 12 V or 24 V supplySMPS Power Supply, Metal Enclosure (5V / 12V / 24V)₹298Closest match, check the specs
Alternatives and when to choose them
- LD2451 speed radar: low-cost single target.
- Automotive radars: vehicle mounted.
- CAN bus with MCP2515: reading CAN data.
Common mistakes to avoid
- Wrong mounting angle.
- No surge protection.
- Using monitoring radar for enforcement.
- Skipping lane setup.
Frequently asked questions
Can traffic radar count vehicles?
Yes, flow radars count vehicles per lane and measure speed.
Does mounting angle matter?
Yes. A wrong angle to the road lowers measured speed, so follow the manual.
Is it accurate enough for fines?
Only certified enforcement radars can be used for fines.
Does it work in rain and at night?
Yes. Radar works in darkness, rain and fog, unlike cameras.
How do I get the data?
Read RS485 or Ethernet output into a controller or server.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
