Component guide · Beginner · 4 min read
US-100, HY-SRF05, RCWL-9620, Grove Ultrasonic Ranger, Hiwonder Glowy, GY-US42

DFRobot URM09 and RAK12007 Ultrasonic Sensors
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are alternatives to the HC-SR04 for 2 cm to 4.5 m distance measurement. The US-100 adds temperature compensation and a UART mode, the HY-SRF05 adds a single-pin mode, and the RCWL-9620, Hiwonder glowy and GY-US42 add I2C. The Grove Ultrasonic Ranger and DFRobot URM09 use one signal pin or analog output, and the RAK12007 fits WisBlock LoRaWAN nodes.
Key specs at a glance
- Range
- About 2 to 450 cm (US-100, SRF05, RCWL-9620), 2 to 500 cm (URM09)
- Supply
- 3.3 to 5 V on most (US-100 2.4 to 5.5 V)
- Interface
- Trigger and echo, single pin, UART (US-100, GY-US42), I2C (RCWL-9620, Hiwonder, GY-US42), analog (URM09 analog)
- Frequency
- 40 kHz
- Beam
- About 15 to 30 degrees
- Rate
- Up to about 30 Hz
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1US-100 Ultrasonic Distance Sensor with Temperature Compensation₹332
Option 2HY-SRF05 Ultrasonic Sensor Module – 5-Pin Interface, 3cm-4.5m Range₹146
Option 3M5Stack RCWL-9620 Ultrasonic Distance Unit I/O – 2cm-450cm Range, 16mm Probe₹739
Option 4Seeed Studio Grove Ultrasonic Ranger – 40kHz PWM Distance Sensor Module₹499
Option 5Hiwonder Glowy Ultrasonic Distance Sensor Module – I2C Interface, 2-400cm Range₹1,362
Option 6GY-US42 Ultrasonic Distance Measurement Sensor Module for Pixhawk & APM – I2C/UART/PWM₹989
What the US-100, HY-SRF05, RCWL-9620, URM09 and Grove ultrasonic sensors is
The US-100 and SRF05 are ultrasonic distance sensors like the HC-SR04, with better range and features; the US-100 also has UART mode and temperature compensation.
The US-100 works like an HC-SR04 with its jumper removed; with the jumper fitted it answers on UART at 9600: send 0x55 and get two bytes of distance in mm.
Distance from echo time = time in microseconds x 0.0343 / 2 cm at about 20 degrees C. The US-100 corrects for temperature itself in UART mode.
US-100, HY-SRF05, RCWL-9620, URM09 and Grove ultrasonic sensors pinout
The pins on the US-100, HY-SRF05, RCWL-9620, URM09 and Grove ultrasonic sensors and what each one does.
| Pin | Function |
|---|---|
| VCC, GND | Power |
| Trig / Echo | HC-SR04 style |
| SIG | Single pin (Grove, URM09) |
| SDA / SCL or TX / RX | I2C or UART types |
- VCC, GND
- Power
- Trig / Echo
- HC-SR04 style
- SIG
- Single pin (Grove, URM09)
- SDA / SCL or TX / RX
- I2C or UART types
Wiring the US-100, HY-SRF05, RCWL-9620, URM09 and Grove ultrasonic sensors
Connect the US-100, HY-SRF05, RCWL-9620, URM09 and Grove ultrasonic sensors like this.
| US-100, HY-SRF05, RCWL-9620, URM09 and Grove ultrasonic sensors pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5 V | 3.3 V (on 3.3 V-capable models) |
| GND | GND | GND |
| Trig | D9 | GPIO 5 |
| Echo | D10 | GPIO 18 (via divider if 5 V) |
- VCC
- Arduino Uno:
- 5 V
- ESP32:
- 3.3 V (on 3.3 V-capable models)
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- Trig
- Arduino Uno:
- D9
- ESP32:
- GPIO 5
- Echo
- Arduino Uno:
- D10
- ESP32:
- GPIO 18 (via divider if 5 V)
Example code
A minimal sketch to check the part works.
#include <SoftwareSerial.h>
SoftwareSerial us(10, 11); // RX, TX
void setup() { Serial.begin(115200); us.begin(9600); }
void loop() {
us.write(0x55); // request distance
delay(60);
if (us.available() >= 2) {
int mm = us.read() << 8;
mm |= us.read();
Serial.print(mm); Serial.println(" mm");
}
delay(200);
}Setup and tuning
VCC, GND, Trig and Echo (or TX/RX for US-100 in UART mode).
fit the jumper for UART mode, remove it for Trig/Echo.
US-100 works at 3.3 or 5 V; SRF05 needs 5 V.
tie Mode to GND for single-pin use.
about 2 cm to 4.5 m.
What you need
Shop this list15 of 16 found in our store · ₹44,228
US-100 Ultrasonic Distance Sensor with Temperature Compensation: the part this guide coversUS-100 Ultrasonic Distance Sensor with Temperature Compensation₹332
HY-SRF05 Ultrasonic Sensor Module – 5-Pin Interface, 3cm-4.5m Range: another version this guide coversHY-SRF05 Ultrasonic Sensor Module – 5-Pin Interface, 3cm-4.5m Range₹146
M5Stack RCWL-9620 Ultrasonic Distance Unit I/O – 2cm-450cm Range, 16mm Probe: another version this guide coversM5Stack RCWL-9620 Ultrasonic Distance Unit I/O – 2cm-450cm Range, 16mm Probe₹739
Seeed Studio Studio Grove Ultrasonic Ranger – 40kHz PWM Distance Sensor Module: another version this guide coversSeeed Studio Grove Ultrasonic Ranger – 40kHz PWM Distance Sensor Module₹499Closest match, check the specs
Hiwonder Glowy Ultrasonic Distance Sensor Module – I2C Interface, 2-400cm Range: another version this guide coversHiwonder Glowy Ultrasonic Distance Sensor Module – I2C Interface, 2-400cm Range₹1,362
GY-US42 Ultrasonic Distance Measurement Sensor Module for Pixhawk & APM – I2C/UART/PWM: another version this guide coversGY-US42 Ultrasonic Distance Measurement Sensor Module for Pixhawk & APM – I2C/UART/PWM₹989
DFRobot Gravity URM09 Ultrasonic Distance Sensor (2–500cm, Trig) – PH2.0-3P Gravity Interface: another version this guide coversDFRobot Gravity URM09 Ultrasonic Distance Sensor (2–500cm, Trig) – PH2.0-3P Gravity Interface₹949
DFRobot Gravity URM09 Analog Ultrasonic Sensor – 2cm to 500cm Range, 30Hz, 3.3V/5V: another version this guide coversDFRobot Gravity URM09 Analog Ultrasonic Sensor – 2cm to 500cm Range, 30Hz, 3.3V/5V₹1,049
RAKwireless Ultrasonic Sensor ango Sense CS100 RAK12007 Module – Pulse Width Output: another version this guide coversRAKwireless Ultrasonic Sensor ango Sense CS100 RAK12007 Module – Pulse Width Output₹669
Generic HS-SR04-L Ultrasonic Module – PH2.0 Interface: another version this guide coversHS-SR04-L Ultrasonic Module – PH2.0 Interface₹239
HS-SR04P Ultrasonic Distance Sensor Module – PH2.0 Connector: another version this guide coversHS-SR04P Ultrasonic Distance Sensor Module – PH2.0 Connector₹219- Uno R3 development board: the controller used in the wiring tableFind this part
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389
0.96 inch OLED display 128x64: to show readings without a computer0.96" OLED Display 128x64₹139Closest match, check the specs
HC-SR04 ultrasonic range finder: the classic low-cost ultrasonic sensorHC-SR04 Ultrasonic Range Finder Sensor Module for Arduino₹69Closest match, check the specs
Holybro Pixhawk 6C flight controller: for drone and rover useHolybro Pixhawk 6C Flight Controller + PM02 Power Module₹36,439Closest match, check the specs
Alternatives and when to choose them
- HC-SR04: the baseline sensor.
- MaxBotix EZ: better quality.
- Waterproof ultrasonic sensors: outdoor.
Common mistakes to avoid
- Wrong jumper setting.
- SRF05 on 3.3 V.
- 5 V Echo into ESP32.
- Measuring under 2 cm.
Frequently asked questions
What is better about the US-100?
It works at 3.3 V and has UART mode with temperature compensation.
How do I use US-100 in UART mode?
Fit the jumper and send 0x55 to read distance.
Can the SRF05 run at 3.3 V?
No, it needs 5 V; use a divider on Echo.
What is SRF05 single-pin mode?
One pin works as both trigger and echo, saving a pin on your board.
Why are readings wrong at close range?
Objects closer than about 2 cm are inside the blind zone and cannot be measured.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


