Shop by category
Shop all components
Wi-Fi Modules & Development Boards · Generic
The ESP-01 ESP8266 Serial Wi-Fi Transceiver Module is a compact, self-contained SoC with integrated TCP/IP stack, enabling microcontroller-based projects to connect to 802.11 b/g/n networks or operate as a standalone application processor.
📖Guide for this partESP-01 / ESP-01S ESP8266 Module→Learn how this part works on ElectrolarkFree guide, circuit simulator and quizBuy 10 or more to pay ₹124.45 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The ESP-01 is a foundational ESP8266-based Wi-Fi module that packages the full capabilities of the popular chip into a minimal footprint. It integrates a 32-bit Tensilica processor, RF front-end, power management, and 1MB of flash, serving as either a network co-processor handling all Wi-Fi connectivity via AT commands or as a standalone application processor running custom firmware.
Designed for low external component count, the module includes an onboard TR switch, balun, LNA, power amplifier, and matching network, requiring minimal supporting circuitry. Its serial UART interface allows for straightforward integration with Arduino, Raspberry Pi, or other microcontrollers, enabling rapid prototyping of IoT devices, sensors, and smart home nodes.
| Brand / part no. | Generic |
|---|---|
| CPU | 32-bit Tensilica L106 |
| Category | Wi-Fi Modules & Development Boards |
| Interfaces | UART, SPI, SDIO 1.1/2.0 |
| Flash Memory | 1 MB |
| Supply Voltage | 3.3V (Requires logic-level conversion for 5V systems) |
| Operating Modes | Station, Soft-AP, Wi-Fi Direct (P2P) |
| RF Output Power | 19.5 dBm |
| Wireless Protocol | 802.11 b/g/n Wi-Fi |
| Dimensions (L x W) | 25 mm x 15 mm |
| Microcontroller/SoC | ESP8266 |
| Standby Power Consumption | < 1.0 mW (DTIM3) |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | 3.3 V only |
|---|---|
| GND | Ground |
| TX | UART transmit |
| RX | UART receive (3.3 V) |
| CH_PD / EN | Pull high to enable |
| RST | Reset, active low |
| GPIO0 | Low at boot to flash |
| GPIO2 | General purpose, keep high at boot |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Step-by-step builds that use parts from Wi-Fi Modules & Development Boards.
CPU: 32-bit Tensilica L106; Category: Wi-Fi Modules & Development Boards; Interfaces: UART, SPI, SDIO 1.1/2.0; Flash Memory: 1 MB; Supply Voltage: 3.3V (Requires logic-level conversion for 5V systems); Operating Modes: Station, Soft-AP, Wi-Fi Direct (P2P). The full list is under Specifications.
VCC: 3.3 V only; GND: Ground; TX: UART transmit; RX: UART receive (3.3 V); CH_PD / EN: Pull high to enable; RST: Reset, active low; GPIO0: Low at boot to flash; GPIO2: General purpose, keep high at boot. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹44.00
Incl. GST
₹249.00
Incl. GST
₹892.00
Incl. GST
₹2,249.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.