Raspberry Pi Pico weather display (MicroPython)
Your first MicroPython project: temperature and humidity on an OLED.
Shop by category
Shop all componentsBoards beyond the Raspberry Pi often cost less or bring extra features, but their software comes from the maker or community. This project walks through the general routine on a Longan Pi 3H: pick the right image, flash, find the IP address, harden SSH and install a service.
Change default passwords before connecting any board to the internet.
Tick anything you already have and the total updates.
Allwinner H618 board with Wi-Fi 6
Luckfox Pico Zero: a tiny Linux board; the same headless steps apply
Wait two minutes on first boot; use a USB-serial adapter on the debug UART to see the boot log.
Some images need a firmware package for the Wi-Fi chip; use Ethernet first and install it.
Use a 5 V 3 A supply and a heatsink.
Linux commands do; GPIO libraries and camera stacks differ.
The maker's image first; community images when they support your board.
The H618 is closer to a Pi 3 or 4 in speed.
2 parts: Sipeed LonganPi LPi3H Allwinner H618 Dev Board 4K Wi-Fi 6 and Luckfox Pico Zero Linux Micro Board (RV1106G3). On this page you can tick the parts you already have and add only the rest to your cart.
It is a intermediate project and takes about 2 hours. The build on this page has 5 steps.
About ₹4,499 for the parts at the prices on this page. Quantity price breaks lower the cost when you build several.
Board support images and kernels; Finding a headless board's IP address; Basic SSH hardening.
Change default passwords before connecting any board to the internet.
Ideas that reuse this build: Pi 5 NVMe home server. They are listed under Take it further on this page.
Your first MicroPython project: temperature and humidity on an OLED.
A web page with ON and OFF buttons that switches a relay over Wi-Fi.
A warm ring light that fades up at dusk and down at dawn.
Turn a Pi and a touchscreen into a home command centre with a clock and to-do list.
Learning project. Check every circuit and the datasheet of each part before you power it up.