Component guide · Intermediate · 4 min read
CAN, Serial and USB DAQ Tools

SN65HVD230 Transceiver, WeAct ISOCANFD, Waveshare USB-CAN-FD-B and 2-Ch CAN to Ethernet, Seeed CANBed, M5Stack PWRCAN, Jetson RS485 CAN Board, Isolated RS232 Converters, UART Fibre Module, XBee Explorer and MCC USB DAQ Devices
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These tools help you connect to and test industrial buses. The SN65HVD230 and ISOCANFD boards are CAN transceivers for microcontrollers with a built-in CAN controller, such as the ESP32 or STM32. The USB-CAN-FD-B analyser lets a PC watch and send CAN frames. Isolated RS232 converters protect PCs from ground faults. MCC USB devices add digital I/O, counters or thermocouple inputs to a PC.
Key specs at a glance
- SN65HVD230
- 3.3V CAN transceiver, up to 1 Mbit/s
- ISOCANFD
- Isolated CAN FD transceiver, up to 5 Mbit/s
- USB-CAN-FD-B
- PC CAN and CAN FD analyser with software
- CAN to Ethernet
- Two CAN ports to TCP/UDP
- Serial
- Isolated USB to 4x RS232, rail-mount TTL to RS232, UART over fibre
- MCC DAQ
- USB-1024LS 24 DIO, USB-2001-TC thermocouple, USB-CTR04 counters, USB-TEMP
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SN65HVD230 CAN Bus Transceiver Evaluation Board₹229
Option 2WeAct Studio ISOCANFD Module V1 CA-IS2062A 5Mbps CAN FD Transceiver₹249
Option 3Waveshare USB-CAN-FD-B CAN/CAN FD Bus Data Analyzer₹9,969
Option 4Waveshare Industrial 2-Channel CAN to Ethernet Server₹8,300
Option 5Seeed Studio CANBed Arduino CAN-Bus DevKit w/ ATmega32U4 & MCP2515₹3,149
Option 6M5Stack PWRCAN 13.2 Module with Isolated 2-Ch CAN & RS485₹2,765
What the CAN bus, serial interface and USB DAQ tools is
These are bus and data tools: CAN transceivers and USB adapters, serial converters and USB data acquisition boards for testing and logging signals.
An ESP32 has a CAN controller (TWAI) built in: add an SN65HVD230 and you can read a CAN bus. Arduino Uno-class boards need an MCP2515 controller instead, as on the Seeed CANBed.
Use the USB-CAN analyser to find bitrate and IDs on an unknown bus before writing code. MCC DAQ devices work with MCC's DAQami software and have Python libraries (mcculw on Windows, uldaq on Linux).
CAN bus, serial interface and USB DAQ tools pinout
The pins on the CAN bus, serial interface and USB DAQ tools and what each one does.
| Pin | Function |
|---|---|
| CANH / CANL | To the bus, twisted pair |
| TX / RX | To the MCU's CAN TX and RX |
| 120 ohm | Termination jumper on many boards |
| RS232 DB9 | On converters |
| Screw terminals | On DAQ devices |
- CANH / CANL
- To the bus, twisted pair
- TX / RX
- To the MCU's CAN TX and RX
- 120 ohm
- Termination jumper on many boards
- RS232 DB9
- On converters
- Screw terminals
- On DAQ devices
Wiring the CAN bus, serial interface and USB DAQ tools
Connect to a vehicle bus in listen-only mode first. Never connect to brake or steering buses while driving.
| CAN bus, serial interface and USB DAQ tools pin | Connection | Note |
|---|---|---|
| Transceiver | 3.3V, GND, CTX, CRX to MCU | SN65HVD230 is 3.3V |
| Bus | CANH to CANH, CANL to CANL | 120 ohm at both ends |
| Analyser | USB to PC, CAN to bus | Set the right bitrate |
- Transceiver
- Connection:
- 3.3V, GND, CTX, CRX to MCU
- Note:
- SN65HVD230 is 3.3V
- Bus
- Connection:
- CANH to CANH, CANL to CANL
- Note:
- 120 ohm at both ends
- Analyser
- Connection:
- USB to PC, CAN to bus
- Note:
- Set the right bitrate
Example code
GPIO5 is CAN TX and GPIO4 is CAN RX here; change to your wiring. Match the bitrate to the bus.
#include "driver/twai.h"
void setup() {
Serial.begin(115200);
twai_general_config_t g = TWAI_GENERAL_CONFIG_DEFAULT(GPIO_NUM_5, GPIO_NUM_4, TWAI_MODE_LISTEN_ONLY);
twai_timing_config_t t = TWAI_TIMING_CONFIG_500KBITS();
twai_filter_config_t f = TWAI_FILTER_CONFIG_ACCEPT_ALL();
twai_driver_install(&g, &t, &f);
twai_start();
}
void loop() {
twai_message_t m;
if (twai_receive(&m, pdMS_TO_TICKS(1000)) == ESP_OK) {
Serial.printf("ID 0x%03X len %d:", m.identifier, m.data_length_code);
for (int i = 0; i < m.data_length_code; i++) Serial.printf(" %02X", m.data[i]);
Serial.println();
}
}Setup and tuning
fit 120 Ω at the two ends of the bus only.
set the same CAN bitrate (for example 500 kbps) on every node and the adapter.
use a 3.3 V transceiver such as the SN65HVD230 with ESP32 and STM32.
use isolated adapters on machines and vehicles to protect your laptop.
use SavvyCAN, PCAN-View or candump on Linux to view traffic.
What you need
Shop this list17 of 17 found in our store · ₹1,66,542
SN65HVD230 CAN Bus Transceiver Evaluation Board: the part this guide coversSN65HVD230 CAN Bus Transceiver Evaluation Board₹229
WeAct Studio ISOCANFD Module V1 CA-IS2062A 5Mbps CAN FD Transceiver: another version this guide coversWeAct Studio ISOCANFD Module V1 CA-IS2062A 5Mbps CAN FD Transceiver₹249
Waveshare USB-CAN-FD-B CAN/CAN FD Bus Data Analyzer: another version this guide coversWaveshare USB-CAN-FD-B CAN/CAN FD Bus Data Analyzer₹9,969
Waveshare Industrial 2-Channel CAN to Ethernet Server: another version this guide coversWaveshare Industrial 2-Channel CAN to Ethernet Server₹8,300
Seeed Studio Studio CANBed Arduino CAN-Bus DevKit w/ ATmega32U4 & MCP2515: another version this guide coversSeeed Studio CANBed Arduino CAN-Bus DevKit w/ ATmega32U4 & MCP2515₹3,149Closest match, check the specs
M5Stack PWRCAN 13.2 Module with Isolated 2-Ch CAN & RS485: another version this guide coversM5Stack PWRCAN 13.2 Module with Isolated 2-Ch CAN & RS485₹2,765
Waveshare RS485 CAN Expansion Board for Jetson Nano w/ Digital Isolation: another version this guide coversWaveshare RS485 CAN Expansion Board for Jetson Nano w/ Digital Isolation₹2,309
Waveshare Industrial Isolated USB to 4-Ch RS232 Converter: another version this guide coversWaveshare Industrial Isolated USB to 4-Ch RS232 Converter₹3,700
Waveshare Rail-Mount TTL to RS232 Isolated Converter: another version this guide coversWaveshare Rail-Mount TTL to RS232 Isolated Converter₹1,144
DFRobot Gravity UART Fiber Optic Transceiver Module: another version this guide coversDFRobot Gravity UART Fiber Optic Transceiver Module₹2,755
SparkFun XBee Explorer USB FT231X Serial Base Unit: another version this guide coversSparkFun XBee Explorer USB FT231X Serial Base Unit₹3,959
Digilent MCC USB-1024LS 24-Channel Digital I/O USB Device: another version this guide coversDigilent MCC USB-1024LS 24-Channel Digital I/O USB Device₹14,399
Digilent MCC USB-2001-TC Single-Channel Thermocouple DAQ Device: another version this guide coversDigilent MCC USB-2001-TC Single-Channel Thermocouple DAQ Device₹19,489
Digilent MCC USB-CTR04 High-Speed Counter/Timer USB Device: another version this guide coversDigilent MCC USB-CTR04 High-Speed Counter/Timer USB Device₹44,379
Digilent MCC USB-TEMP & TC Series USB DAQ Device: another version this guide coversDigilent MCC USB-TEMP & TC Series USB DAQ Device₹49,309
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Alternatives and when to choose them
- CAN-BUS MCP2515: CAN for Arduino.
- USB to RS485 converter: PC to RS485.
- Pi industrial I/O and DAQ HATs: DAQ on a Pi.
Common mistakes to avoid
- Adding termination at every node.
- Using a 5 V transceiver with 3.3 V logic and no shifting.
- Mixing bitrates between nodes.
- Connecting a laptop to a vehicle bus without isolation.
Frequently asked questions
Can an ESP32 talk CAN?
Yes. Its TWAI controller works with a transceiver such as the SN65HVD230.
Why do I see only error frames?
Check bitrate, CAN-H and CAN-L wiring, and termination.
Do I need an isolated adapter?
It is wise on vehicles and machines, where ground differences can damage a laptop.
What is CAN FD?
A faster CAN version with bigger frames; both the adapter and devices must support it.
Can I log data to Excel?
Most DAQ tools export CSV, which opens in Excel or Python.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
