Comparison · Intermediate · 3 min read
Depth Cameras
Intel RealSense D415, D435, D455 and D405 Compared
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A depth camera gives a distance for every pixel. Intel RealSense D400 cameras use two infrared cameras and a projector. The D435 and D455 have global shutters and suit moving robots, the D415 has a narrower field of view and finer detail for scanning, and the D405 works at close range. Add an 'i' version for an IMU. Connect over USB 3 and use the RealSense SDK or ROS.
Key specs at a glance
- D415
- Rolling shutter, narrow field of view, finer depth detail
- D435 / D435i
- Global shutter, wide view, good for robots (i adds IMU)
- D455
- Longer baseline for better range, IMU and global shutter
- D456
- IP65 version of the D455 family
- D405
- Short-range, high accuracy for small objects
- Interface
- USB 3.x, SDK and ROS wrappers
Choose the model
Pick the camera for the job.
| Model | Best for | Notes |
|---|---|---|
| D415 | 3D scanning and still scenes | Rolling shutter; fine detail up close |
| D435 / D435i | Mobile robots and drones, SLAM | Global shutter; the i adds an IMU for motion tracking |
| D455 / D455f | Longer range, indoor navigation | Wider baseline; f version has an IR pass filter |
| D456 | Dusty or wet environments | IP65 housing |
| D405 | Close-range robot picking and inspection | Works at very short distances |
- D415
- Best for:
- 3D scanning and still scenes
- Notes:
- Rolling shutter; fine detail up close
- D435 / D435i
- Best for:
- Mobile robots and drones, SLAM
- Notes:
- Global shutter; the i adds an IMU for motion tracking
- D455 / D455f
- Best for:
- Longer range, indoor navigation
- Notes:
- Wider baseline; f version has an IR pass filter
- D456
- Best for:
- Dusty or wet environments
- Notes:
- IP65 housing
- D405
- Best for:
- Close-range robot picking and inspection
- Notes:
- Works at very short distances
How stereo depth works
Two cameras see slightly different views, and the shift between matching points tells the distance. An infrared projector paints a pattern so plain walls still have texture. Bright sunlight and shiny or transparent surfaces reduce accuracy, and depth error grows with the square of the distance.
Getting started
- 1Plug the camera into a USB 3 port with a good cable; USB 2 limits the resolution and frame rate.
- 2Install the RealSense SDK and open the viewer to see depth and colour.
- 3Try the point cloud view and measure a known distance.
- 4For robots, use the ROS wrapper and combine depth with the IMU for SLAM.
- 5Mount the camera rigidly and avoid pointing it into direct sun.
Limits and alternatives
Depth cameras need a host with USB 3 and enough CPU, such as a Raspberry Pi 5 or a Jetson-class computer. Simple obstacle avoidance can use a cheaper ToF sensor or LiDAR. Other makers sell similar cameras with on-board AI; see TinyML and vision kits and edge AI boards.
Try it: Length converter calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Using a USB 2 port or a weak cable.
- Expecting good depth on glass or mirrors.
- Pointing the camera into the sun.
- Choosing a rolling-shutter camera for a fast moving robot.
- Mounting loosely and losing calibration.
Frequently asked questions
D435 or D455?
D455 has longer range and a wider baseline; D435 is smaller and cheaper.
What does the i mean?
It includes an IMU.
Does RealSense work with Raspberry Pi?
Yes with the SDK, though a Pi 4 or 5 is needed for good performance.
Can it work outdoors?
Yes in shade, but bright sunlight reduces the IR pattern.
Is the D405 good for far objects?
No. It is designed for close range.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






