Shop by category
Shop all componentsUnit converters
1 inch = 25.4 mm1 mil = 0.001 inch = 0.0254 mm1 ft = 304.8 mmThe standard 0.1 inch header pitch is 2.54 mm, or 100 mil. A 10 mil PCB trace is 0.254 mm wide.
Electronics mixes metric and imperial units. Header pins, breadboards and many IC packages are on a 0.1 inch (100 mil) grid, PCB tools often use mils for traces, and mechanical parts are in millimetres.
A mil is one thousandth of an inch, not a millimetre. Mixing them up is a classic PCB mistake that makes traces 40 times too wide or too thin.
Exactly 25.4 mm.
One thousandth of an inch, 0.0254 mm. PCB traces and clearances are often given in mils.
2.54 mm, the standard pin pitch of breadboards and headers.
1 inch = 25.4 mm; 1 mil = 0.001 inch = 0.0254 mm; 1 ft = 304.8 mm.
The standard 0.1 inch header pitch is 2.54 mm, or 100 mil. A 10 mil PCB trace is 0.254 mm wide.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators