Shop by category
Shop all componentsUnit converters
1 kgf·cm = 0.0981 N·m1 N·m = 141.6 oz·in1 oz·in = 7.06 mN·mAn MG996R servo rated 10 kgf·cm gives 0.98 N·m, or 139 oz·in.
Hobby servos and Indian motor listings quote torque in kgf·cm, stepper datasheets often use N·m or oz·in. Convert to the same unit before comparing motors.
1 kgf·cm means the motor can hold 1 kg at the end of a 1 cm arm, or 0.5 kg at 2 cm.
Multiply by 0.0981. 20 kgf·cm is about 1.96 N·m.
About 141.6 oz·in.
It is easy to picture: a 10 kgf·cm servo can hold 10 kg at 1 cm from the shaft, or 1 kg at 10 cm.
1 kgf·cm = 0.0981 N·m; 1 N·m = 141.6 oz·in; 1 oz·in = 7.06 mN·m.
An MG996R servo rated 10 kgf·cm gives 0.98 N·m, or 139 oz·in.
Geekobot builds that use it include Joystick pan-tilt camera mount, Tilt-controlled servo wand, Automatic chicken coop door and Pico servo controlled by a knob (MicroPython). Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators