Component guide · Beginner · 3 min read
Digital Programmable Timer Switch (CN101A, L701, TM619)

Setup and Wiring
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A digital programmable timer switch turns a load on and off at set times each day or week, with no Wi-Fi or app. The CN101A runs from 12 V or 24 V DC for solar and vehicle systems; the L701 and Frontier TM619 run from 230 V AC and switch 16 A and 30 A, for street lights, signboards, pumps and aquariums. They keep 16 programs and time on an internal battery.
Key specs at a glance
- CN101A
- 12 V or 24 V DC supply, 16 programs, 16 A relay
- L701
- 230 V AC (or 24 V DC version), 16 A, 16 programs
- TM619 (Frontier)
- 230 V AC, 30 A, 16 programs, DIN rail
- Accuracy
- About 2 s per day
- Backup
- Internal rechargeable battery keeps the clock
- Modes
- Auto, manual ON, manual OFF, countdown and random on some
This part is often wired to 230 V mains. Do all wiring with the plug pulled out, keep mains wires inside a closed box with strain relief, add a fuse, and never touch the board while it is plugged in. If you are new to mains wiring, have an electrician check it before you switch on.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1CN101A 12V LCD Digital Programmable Timer Switch₹689
Option 2CN101A 24V LCD Digital Timer Programmable Time Switch₹625
Option 3L701 Microcomputer Programmable Electronic Timer Switch 250V 16A LCD₹599
Option 4L701 Microcomputer Programmable Timer Switch AC 250V 16A LCD Display₹419
Option 5L701 Microcomputer DC 24V LCD Programmable Electronic Timer Switch₹629
Option 6Frontier TM619H2 Digital Timer Switch, 30A, 230V AC₹533
What the Digital timer switch is
Use a timer for loads that follow a fixed schedule. For pumps or AC compressors above the timer's rating, let the timer switch a contactor coil instead of the load itself.
Days can be grouped (every day, Monday to Friday, weekends) to save program slots.
Digital timer switch pinout
The pins on the Digital timer switch and what each one does.
| Pin | Function |
|---|---|
| Supply terminals | 12/24 V DC or 230 V AC by model |
| COM / NO / NC | Relay output (some models switch live internally) |
| Buttons | Clock, Program, Day, Hour, Minute, Manual, Reset |
- Supply terminals
- 12/24 V DC or 230 V AC by model
- COM / NO / NC
- Relay output (some models switch live internally)
- Buttons
- Clock, Program, Day, Hour, Minute, Manual, Reset
Wiring the Digital timer switch
Mains wiring must be done with the power off, in a proper enclosure, with cable and a fuse or MCB rated for the load. If you are not sure, have a qualified electrician install it. Check the wiring diagram printed on your timer: some models switch the live internally, others give a dry contact.
| Digital timer switch pin | CN101A (DC) | L701 / TM619 (AC) |
|---|---|---|
| Supply | 12 V or 24 V battery or adapter | 230 V L and N |
| Output | Load through COM / NO | Load live through the relay |
| Large load | Use a relay or contactor | Contactor coil for pumps over 1 HP |
- Supply
- CN101A (DC):
- 12 V or 24 V battery or adapter
- L701 / TM619 (AC):
- 230 V L and N
- Output
- CN101A (DC):
- Load through COM / NO
- L701 / TM619 (AC):
- Load live through the relay
- Large load
- CN101A (DC):
- Use a relay or contactor
- L701 / TM619 (AC):
- Contactor coil for pumps over 1 HP
Example code
If the load does not switch at the set time, the timer is probably left in ON or OFF mode instead of AUTO.
1. Press CLOCK and hold; set Day, Hour, Minute; release.
2. Press TIMER: shows 1ON. Set Day group, Hour, Minute.
3. Press TIMER again: shows 1OFF. Set the off time.
4. Repeat for 2ON / 2OFF and so on.
5. Press CLOCK to return.
6. Press MANUAL until the display shows AUTO.
Unused programs show -- : -- and do nothing.Setup and tuning
power the timer for a few hours so the backup battery charges before setting the clock.
the reset button clears all programs; use a pin.
these timers do not track sunset; adjust street light times seasonally or use a light sensor.
use a contactor for motors, heaters above the rating, and three-phase loads.
What you need
Shop this list8 of 9 found in our store · ₹3,809
CN101A 12V LCD Digital Programmable Timer Switch: the part this guide coversCN101A 12V LCD Digital Programmable Timer Switch₹689
CN101A 24V LCD Digital Timer Programmable Time Switch: another version this guide coversCN101A 24V LCD Digital Timer Programmable Time Switch₹625
L701 Microcomputer Programmable Electronic Timer Switch 250V 16A LCD: another version this guide coversL701 Microcomputer Programmable Electronic Timer Switch 250V 16A LCD₹599
L701 Microcomputer Programmable Timer Switch AC 250V 16A LCD Display: another version this guide coversL701 Microcomputer Programmable Timer Switch AC 250V 16A LCD Display₹419
L701 Microcomputer DC 24V LCD Programmable Electronic Timer Switch: another version this guide coversL701 Microcomputer DC 24V LCD Programmable Electronic Timer Switch₹629
Frontier TM619H2 Digital Timer Switch, 30A, 230V AC: another version this guide coversFrontier TM619H2 Digital Timer Switch, 30A, 230V AC₹533
SMPS power supply: a 12 V or 24 V supply for the CN101A150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply₹138Closest match, check the specs- Fuse holder: to fuse the switched circuitFind this part
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- Sonoff BASIC and MINI: app schedules and remote control.
- 555 timer IC: build simple delay timers.
- Relay modules: timing with a microcontroller.
Common mistakes to avoid
- Leaving the timer in manual ON or OFF instead of AUTO.
- Switching a motor directly above the relay rating.
- Setting programs before the backup battery charges.
- Wiring an AC timer to a DC supply or the reverse.
Frequently asked questions
How many programs can I set?
Usually 16 on and 16 off times.
Does it keep time during a power cut?
Yes, the internal battery keeps the clock and programs.
Can it run a 1 HP pump?
Use it to switch a contactor coil for motors.
CN101A or L701?
CN101A for 12 or 24 V DC systems; L701 for 230 V AC.
Can it follow sunset?
No. Use an astronomical timer or a light sensor switch.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


