Component guide · Intermediate · 7 min read
FPV 2004, 2005, 2006 and 2105.5 Motors for 4 Inch and Lightweight 5 Inch Drones

T-Motor F2004, EMAX ECO II 2004, HGLRC SPECTER 2105.5 and More
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Motors from 2004 to 2105.5 sit between micro and full 5 inch motors. They suit 4 inch long-range drones, light 5 inch builds and some 3.5 inch cinewhoops. Choose around 2,000 to 2,700 KV on 4S and 1,600 to 2,000 KV on 6S. They are lighter than 2207 motors, so flight time goes up, but punch goes down.
Key specs at a glance
- Sizes
- 2004, 2005, 2006, 2105, 2105.5
- KV
- About 1,600 to 3,000 KV
- Battery
- 4S to 6S
- Props
- 4 to 5 inch, light props
- Shaft
- 5 mm threaded on most
- Mounting
- 12x12 mm or 16x16 mm
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Surpass Hobby 2030 Brushless Motor (7200KV) – Red & Black₹1,159
Option 2Surpass Hobby 2030 Brushless Motor (6500KV) – Red & Black₹2,199
Option 3GEPRC SPEEDX2 2105.5 3450KV Brushless Motor – Black₹2,109
Option 4FLYCCI FK2004 V2 Brushless Motor 3150KV₹1,529
Option 5MAD Components Dynamo FS2004 3500KV Brushless Motor – Red₹2,259
Option 6MAD Components FS 2004 DYNAMO FPV Drone Motor 2950KV – Red₹2,259
What the FPV 2004 to 2105.5 motors for 4 inch and light 5 inch drones is
FPV 2004 to 2105 motors are mid-size brushless motors for 3 to 4 inch drones and light long-range builds, usually run on 4S or 6S.
Pick a 2004 or 2005 for a 4 inch long-range build that carries a GPS and a 6S Li-ion pack. Pick a 2105.5 for a light 5 inch that does not need the punch of a 2207, or for a heavier 3.5 inch cinewhoop.
These motors pair well with 35 to 45 A ESCs. Use light, low-pitch props so the motor is not overloaded and stays cool.
FPV 2004 to 2105.5 motors for 4 inch and light 5 inch drones pinout
The pins on the FPV 2004 to 2105.5 motors for 4 inch and light 5 inch drones and what each one does.
| Pin | Function |
|---|---|
| Phase wires | Three wires to the ESC, any order; swap any two to reverse rotation |
| Mount holes | M2 on micro motors, M3 on 5 inch and up; check the bolt pattern (9x9, 12x12, 16x16 mm) |
| Shaft | Plain shaft for press-fit props, or threaded M5 with a nut on 5 inch motors |
| Bell | The outer part that spins; keep it free of debris |
| Size code | First two digits stator width, last two stator height in mm (2207 = 22 x 7 mm) |
- Phase wires
- Three wires to the ESC, any order; swap any two to reverse rotation
- Mount holes
- M2 on micro motors, M3 on 5 inch and up; check the bolt pattern (9x9, 12x12, 16x16 mm)
- Shaft
- Plain shaft for press-fit props, or threaded M5 with a nut on 5 inch motors
- Bell
- The outer part that spins; keep it free of debris
- Size code
- First two digits stator width, last two stator height in mm (2207 = 22 x 7 mm)
Wiring the FPV 2004 to 2105.5 motors for 4 inch and light 5 inch drones
Remove props for all bench tests. Check screw length so it does not touch the motor windings.
| FPV 2004 to 2105.5 motors for 4 inch and light 5 inch drones pin | Connection | Note |
|---|---|---|
| Motor phase A, B, C | ESC motor pads | Any order, reverse in software if needed |
| ESC power | Battery via XT30 or XT60 | Within the motor's cell rating |
| ESC signal | Flight controller motor output | DShot on modern FPV builds |
- Motor phase A, B, C
- Connection:
- ESC motor pads
- Note:
- Any order, reverse in software if needed
- ESC power
- Connection:
- Battery via XT30 or XT60
- Note:
- Within the motor's cell rating
- ESC signal
- Connection:
- Flight controller motor output
- Note:
- DShot on modern FPV builds
Example code
motor_poles must match the motor (14 on most FPV motors, 12 on many tiny whoop motors) so RPM filtering works. Use DSHOT300 on older 8-bit ESCs if DSHOT600 is unstable.
# Betaflight CLI, props OFF
set motor_pwm_protocol = DSHOT600
set dshot_bidir = ON
set motor_poles = 14
save
# Then in the Motors tab, spin each motor slowly and check
# position and direction against the diagram.
# Reverse a wrong motor with the ESC configurator or by swapping two phase wires.Setup and tuning
around 2500 to 3000 KV suits 4S, and 1700 to 2000 KV suits 6S.
fit 3 to 4 inch props; check the maker's prop chart for current draw.
use a 4-in-1 ESC rated for at least 30 A per motor on these sizes.
match the 12x12 or 16x16 mm pattern and use screws that do not reach the windings.
set motor direction in the ESC configurator instead of re-soldering.
spin up in the Betaflight motor tab with props off and check for heat or rough sound.
What you need
Shop this list20 of 20 found in our store · ₹40,272
Surpass Hobby 2030 Brushless Motor (7200KV) – Red & Black: the part this guide coversSurpass Hobby 2030 Brushless Motor (7200KV) – Red & Black₹1,159
Surpass Hobby 2030 Brushless Motor (6500KV) – Red & Black: another version this guide coversSurpass Hobby 2030 Brushless Motor (6500KV) – Red & Black₹2,199
GEPRC SPEEDX2 2105.5 3450KV Brushless Motor – Black: another version this guide coversGEPRC SPEEDX2 2105.5 3450KV Brushless Motor – Black₹2,109
FLYCCI FK2004 V2 Brushless Motor 3150KV: another version this guide coversFLYCCI FK2004 V2 Brushless Motor 3150KV₹1,529
MAD Components Components Dynamo FS2004 3500KV Brushless Motor – Red: another version this guide coversMAD Components Dynamo FS2004 3500KV Brushless Motor – Red₹2,259Closest match, check the specs
MAD Components Components FS 2004 DYNAMO FPV Drone Motor 2950KV – Red: another version this guide coversMAD Components FS 2004 DYNAMO FPV Drone Motor 2950KV – Red₹2,259Closest match, check the specs
MAD Components Components Dynamo FS2004 FPV Drone Motor 3500KV – Green: another version this guide coversMAD Components Dynamo FS2004 FPV Drone Motor 3500KV – Green₹2,259Closest match, check the specs
MAD Components Components FS 2004 DYNAMO FPV Drone Motor 2950KV – Green: another version this guide coversMAD Components FS 2004 DYNAMO FPV Drone Motor 2950KV – Green₹2,259Closest match, check the specs
T-Motor F2004 3000KV Brushless Motor – 3-6S: another version this guide coversT-Motor F2004 3000KV Brushless Motor – 3-6S₹2,419
Surpass Hobby 2040 Brushless Motor (4480KV) – Red & Black: another version this guide coversSurpass Hobby 2040 Brushless Motor (4480KV) – Red & Black₹2,199
Surpass Hobby 2040 Brushless Motor (3900KV) – Red & Black: another version this guide coversSurpass Hobby 2040 Brushless Motor (3900KV) – Red & Black₹1,089
Surpass Hobby 2040 Brushless Motor (3200 KV) – Red & Black: another version this guide coversSurpass Hobby 2040 Brushless Motor (3200 KV) – Red & Black₹1,279
Surpass Hobby 2030 Brushless Motor (4500KV) – Red & Black: another version this guide coversSurpass Hobby 2030 Brushless Motor (4500KV) – Red & Black₹1,159
HGLRC AEOLUS 2004 3600KV Brushless Motor – Red-Black: another version this guide coversHGLRC AEOLUS 2004 3600KV Brushless Motor – Red-Black₹2,446
HGLRC AEOLUS 2004 3000KV Brushless Motor – Green: another version this guide coversHGLRC AEOLUS 2004 3000KV Brushless Motor – Green₹2,387
EMAX ECOII-2004-3000KV Brushless Motor: another version this guide coversEMAX ECOII-2004-3000KV Brushless Motor₹1,779
GEPRC SPEEDX2 2105.5 2650KV Motor – M5: another version this guide coversGEPRC SPEEDX2 2105.5 2650KV Motor – M5₹2,426
GEPRC SPEEDX2 2105.5 2650KV Brushless Motor – Black: another version this guide coversGEPRC SPEEDX2 2105.5 2650KV Brushless Motor – Black₹2,869
iFlight XING 2005 FPV Motor Unibell – 2550KV: another version this guide coversiFlight XING 2005 FPV Motor Unibell – 2550KV₹2,209
AxisFlying C206 2006 Brushless Motor 2750KV for 3.5-inch 6S Cinewhoop: another version this guide coversAxisFlying C206 2006 Brushless Motor 2750KV for 3.5-inch 6S Cinewhoop₹1,979
Alternatives and when to choose them
- FPV micro motors: smaller.
- 5 inch motors 2207 and 2306: more punch.
- Single FPV ESCs: ESC options.
Common mistakes to avoid
- Screws long enough to touch the windings.
- Running high-KV 4S motors on 6S.
- Fitting props larger than the motor is rated for.
- Flying with a loose or damaged bell.
Frequently asked questions
Which KV should I choose for a 4S build?
Around 2500 to 3000 KV suits 3.5 to 4 inch props on 4S.
Can I run these motors on 6S batteries?
Yes, but pick a lower KV around 1700 to 2000 so current and heat stay safe.
What prop sizes fit 2004 to 2105 motors?
Most fit 3 to 4 inch props; heavier pitch props draw more current.
How do I reverse the motor direction?
Change the direction in BLHeli, Bluejay or AM32 configurator, or use Betaflight's motor direction setting.
Why do my motors come down hot?
The prop is too large, the KV too high for the voltage, or filtering is noisy.
Parts for this guide
- ₹1,159View
- ₹2,199View
- ₹2,109View
- ₹1,529View
- ₹2,259View
- ₹2,259View
- ₹2,259View
- ₹2,259View
- ₹2,419View
- ₹2,199View
- ₹1,089View
- ₹1,279View
- ₹1,159View
- ₹2,446View
- ₹2,387View
- ₹1,779View
- ₹2,426View
- ₹2,869View
- ₹2,209View
- ₹1,979View
- ₹2,529View
- ₹2,329View
- ₹2,329View
- ₹1,721View
- ₹1,972View
- ₹2,209View
- ₹1,729View
- ₹1,879View
- ₹2,499View
- ₹2,489View
- ₹1,559View
- ₹2,529View
- ₹2,329View
- ₹2,329View
- ₹1,901View
- ₹1,763View
- ₹2,749View
- ₹2,519View
- ₹1,780View
- ₹779View
- ₹100View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





















