Buying guide · Beginner · 4 min read
Drone Propellers
Size, Pitch, Blades, Materials and Matching to Motors
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A drone propeller is described by diameter, pitch and blade count, for example 5 x 4.3 x 3. Bigger diameter and more pitch give more thrust but pull more current. Choose the size your frame allows, then match pitch and blade count to the motor and battery. Always fit two clockwise and two counter-clockwise props in the right places, and replace chipped ones.
Key specs at a glance
- Naming
- Diameter x pitch x blades, e.g. 5 x 4.3 x 3 inches, or a code such as 5143
- Typical sizes
- 31 mm (65 mm whoop), 2 to 3 inch, 5 inch freestyle, 7 inch long range, 10 inch and larger lifting
- Blades
- 2 for efficiency, 3 for freestyle, 4 to 5 for whoops and ducted
- Materials
- Polycarbonate, glass-fibre nylon, carbon fibre for large props
- Rotation
- Sold in CW and CCW; packs of 4 (2 CW + 2 CCW) are standard
- Mounting
- Shaft sizes of 1.5, 2, 3 or 5 mm; M5 nut, T-mount or push-on
Reading propeller sizes
The first number is the diameter in inches, the second is the pitch (how far the prop would advance per turn), and the last is the number of blades. A 5 x 4.3 x 3 prop is five inches across with a 4.3 inch pitch and three blades. Some makers write the same thing as a four-digit code, so 5143 means 5.1 inch diameter and 4.3 inch pitch.
Low pitch props (3 to 3.5) are gentler and use less current. High pitch (4.3 or more) gives more top speed and punch but needs a strong motor and battery.
Matching size to frame and motor
The frame sets the maximum diameter. These pairings are typical starting points, not rules:
| Frame class | Prop size | Typical motor | Battery |
|---|---|---|---|
| 65 mm whoop | 31 mm, 4 blade | 0802 to 1002 | 1S |
| 75 to 85 mm | 40 mm | 1102 to 1103 | 1S to 2S |
| 3 inch cinewhoop | 2.5 to 3 inch | 1404 to 1507 | 3S to 4S |
| 5 inch freestyle or race | 5 inch, 3 blade | 2207 to 2306 | 4S to 6S |
| 7 inch long range | 7 inch, 2 or 3 blade | 2806.5 to 2807 | 4S to 6S |
| 10 inch and up | 10 to 15 inch | 3115 and larger | 6S |
- 65 mm whoop
- Prop size:
- 31 mm, 4 blade
- Typical motor:
- 0802 to 1002
- Battery:
- 1S
- 75 to 85 mm
- Prop size:
- 40 mm
- Typical motor:
- 1102 to 1103
- Battery:
- 1S to 2S
- 3 inch cinewhoop
- Prop size:
- 2.5 to 3 inch
- Typical motor:
- 1404 to 1507
- Battery:
- 3S to 4S
- 5 inch freestyle or race
- Prop size:
- 5 inch, 3 blade
- Typical motor:
- 2207 to 2306
- Battery:
- 4S to 6S
- 7 inch long range
- Prop size:
- 7 inch, 2 or 3 blade
- Typical motor:
- 2806.5 to 2807
- Battery:
- 4S to 6S
- 10 inch and up
- Prop size:
- 10 to 15 inch
- Typical motor:
- 3115 and larger
- Battery:
- 6S
2, 3 or more blades
most efficient, best for long flight times and cinelifters, less grip in aggressive manoeuvres.
the freestyle and racing standard. Good thrust and control.
quieter and more thrust at low diameter. Common on whoops and ducted drones, at the cost of battery life.
Materials and durability
Polycarbonate (PC) props flex and survive crashes, so they dominate freestyle. Glass-filled nylon props are stiffer and cheaper but break more easily. Carbon fibre props suit large, slow-turning lifting drones; they are stiff and light but can shatter on impact. Always replace a prop with a chip, crack, or bend, because an out-of-balance prop causes vibration, hot motors and jello in video.
Fitting CW and CCW props correctly
Each motor spins one way, and the prop must be designed for that direction. Fit the props so the leading edge of each blade cuts the air first. Many flight controller setups use "props out", where the front props spin outward over the top; check the motor direction diagram in Betaflight. A wrong direction makes the drone flip on takeoff. Tighten M5 nuts firmly, and use thread locker on motors with self-tightening threads only if the maker suggests it.
For bench tests, remove the props.
Choosing for your style
For a smoother, longer-flying build, pick a lower pitch with 2 blades. For sharp freestyle, a 3 blade prop with medium pitch (4 to 4.3) works well. Use a prop balancer on expensive sets to reduce vibration, and keep spare sets: crash damage is part of the hobby. Compare current draw with a battery life calculator when you change props.
Try it: Battery life calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Mounting a CW prop on a CCW motor.
- Flying with a nicked or bent prop.
- Choosing high-pitch props for a weak motor and battery combination.
- Using bench tests with props on.
- Mixing different brands in one set and getting uneven thrust.
Frequently asked questions
What size propeller do I need for a 5 inch drone?
A 5 inch prop, usually three blades, such as 5 x 4.3 x 3 for a 2207 motor.
How do I tell CW from CCW?
Read the marking on the hub (CW or CCW, or R and L) or check that the leading edge points into the direction of spin.
Are more blades better?
They give more thrust per inch but use more current. Pick by use.
Do props wear out?
Yes. Replace them after crashes or if they flex or have white stress marks.
Can I use any brand on any motor?
Yes if the shaft hole and mount pattern match, but different brands behave differently.
What are ducted props?
Props that run inside a ring, used on small whoops for safety.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
- HQProp and Gemfan propeller size charts
- Betaflight configurator documentation on motor direction
- Manufacturer motor recommendation tables
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




