Shop by category
Shop all componentsMotors & mechanics
P (W) = T (N·m) × ω (rad/s)ω = RPM × 2π ÷ 601 kgf·cm = 0.0981 N·mη = P mech ÷ (V × I)A gear motor giving 5 kgf·cm at 300 RPM: T = 0.49 N·m, ω = 31.4 rad/s, P = 15.4 W. If it draws 2 A at 12 V (24 W), efficiency is 64%.
Torque is the turning force, speed is how fast it turns, and power is the product of the two. A gearbox trades one for the other: more torque, less speed, the same power minus losses.
Indian motor listings often give torque in kgf·cm, while datasheets use N·m or oz·in; this calculator converts between them. Choose a motor with 2 to 3 times the torque you calculate for your load, and a driver rated for the stall current.
P = torque (N·m) × RPM × 2π ÷ 60. 0.5 N·m at 300 RPM is about 15.7 W.
1 kgf·cm = 0.0981 N·m. A servo rated 10 kgf·cm gives about 0.98 N·m.
Some electrical power turns into heat in the windings and friction, so mechanical output is lower than V × I.
P (W) = T (N·m) × ω (rad/s); ω = RPM × 2π ÷ 60; 1 kgf·cm = 0.0981 N·m; η = P mech ÷ (V × I).
A gear motor giving 5 kgf·cm at 300 RPM: T = 0.49 N·m, ω = 31.4 rad/s, P = 15.4 W. If it draws 2 A at 12 V (24 W), efficiency is 64%.
Geekobot builds that use it include Light-seeking robot, Clap-controlled robot, TV-remote controlled robot car and Follow-me robot car. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators