Shop by category
Shop all componentsMotors & mechanics
Ratio = teeth driven ÷ teeth driverSpeed out = speed in ÷ ratioTorque out = torque in × ratio × efficiencyA 12-tooth pinion driving a 48-tooth gear: ratio 4:1. A 3000 RPM motor turns the output at 750 RPM, and 0.5 kgf·cm becomes 1.8 kgf·cm at 90% efficiency.
Gears and pulleys trade speed for torque. A small gear driving a large one slows the output and multiplies torque by the same ratio, minus friction losses. Multi-stage gearboxes multiply the stage ratios.
Each spur gear stage loses about 5–10%. Belt drives work the same way with pulley teeth or diameters, and are quieter, which is why 3D printers use them.
Divide the teeth on the driven gear by the teeth on the driving gear. 60 ÷ 20 = 3:1.
The output turns three times slower with about three times the torque, minus friction losses.
Multiply the ratios. A 3:1 stage followed by a 4:1 stage gives 12:1.
Ratio = teeth driven ÷ teeth driver; Speed out = speed in ÷ ratio; Torque out = torque in × ratio × efficiency.
A 12-tooth pinion driving a 48-tooth gear: ratio 4:1. A 3000 RPM motor turns the output at 750 RPM, and 0.5 kgf·cm becomes 1.8 kgf·cm at 90% efficiency.
Geekobot builds that use it include Light-seeking robot, Clap-controlled robot, TV-remote controlled robot car and Follow-me robot car. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators