Shop by category
Shop all componentsMotors & mechanics
Circumference = π × dSpeed (m/s) = π × d (m) × RPM ÷ 60A 65 mm wheel on a 200 RPM BO motor: π × 0.065 × 200 ÷ 60 = 0.68 m/s (2.45 km/h).
A wheel moves one circumference per revolution, so speed is simply circumference times revolutions per second. Use the motor’s loaded RPM, which is typically 70–80% of its no-load figure.
For line followers, a slower and more controllable robot often wins; for sumo and racing robots, balance speed against the torque needed to push and accelerate.
Speed = π × wheel diameter × RPM ÷ 60. A 65 mm wheel at 200 RPM gives about 0.68 m/s.
Motors slow under load and at low battery voltage. The rated RPM is the no-load speed.
Use larger wheels, a higher-RPM gear motor or a higher battery voltage within the motor's rating.
Circumference = π × d; Speed (m/s) = π × d (m) × RPM ÷ 60.
A 65 mm wheel on a 200 RPM BO motor: π × 0.065 × 200 ÷ 60 = 0.68 m/s (2.45 km/h).
Geekobot builds that use it include Light-seeking robot, Clap-controlled robot, TV-remote controlled robot car and Follow-me robot car. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators