Comparison · Beginner · 3 min read
Robot Wheels
Rubber, Caster, Mecanum and Omni Wheels Compared
By Geekobot Learning Team · Updated 24 Oct 2026
On this page
Most small robots use two or four rubber drive wheels pressed onto gear-motor shafts, plus a ball caster for balance. Mecanum wheels have angled rollers so a four-wheel robot can drive sideways and diagonally; omni wheels have rollers at 90° for three- or four-wheel holonomic robots. Bigger wheels go faster but need more torque, so match wheel diameter to motor speed and torque.
Key specs at a glance
- Rubber wheels
- 65 mm for TT/BO motors, 34 to 43 mm for N20
- Ball caster
- Metal ball in a housing; smooth floors
- Mecanum
- Rollers at 45°; sets of left and right wheels
- Omni
- Rollers at 90° to the wheel axis
- Speed
- Speed = RPM x π x diameter / 60
- Fit
- Match the hub to the shaft: D-shaft (N20, 3 mm), TT double-flat, 4 to 6 mm couplers
Wheel types compared
| Wheel | Moves | Surface | Notes |
|---|---|---|---|
| Rubber drive wheel | Forward/back, turns by speed difference | Most floors, short grass | Best grip; choose tyre width for terrain |
| Ball caster | Any direction (passive) | Smooth floors | Can catch on carpet edges |
| Swivel caster | Any direction (passive) | Floors, mild outdoor | Bigger casters handle bumps better |
| Mecanum | Forward, sideways, diagonal, rotate | Flat, hard floors | Need four, in left/right pairs, each with its own motor |
| Omni wheel | Forward plus free sideways roll | Flat floors | Three-wheel triangle or four-wheel cross layouts |
- Rubber drive wheel
- Moves:
- Forward/back, turns by speed difference
- Surface:
- Most floors, short grass
- Notes:
- Best grip; choose tyre width for terrain
- Ball caster
- Moves:
- Any direction (passive)
- Surface:
- Smooth floors
- Notes:
- Can catch on carpet edges
- Swivel caster
- Moves:
- Any direction (passive)
- Surface:
- Floors, mild outdoor
- Notes:
- Bigger casters handle bumps better
- Mecanum
- Moves:
- Forward, sideways, diagonal, rotate
- Surface:
- Flat, hard floors
- Notes:
- Need four, in left/right pairs, each with its own motor
- Omni wheel
- Moves:
- Forward plus free sideways roll
- Surface:
- Flat floors
- Notes:
- Three-wheel triangle or four-wheel cross layouts
How mecanum wheels move sideways
Each mecanum wheel has rollers at 45°, so it pushes partly forward and partly sideways. With the wheels mounted in an X pattern (rollers forming an X seen from above), the sideways components cancel when all wheels spin forward. Spin the front-left and rear-right forward and the other two backward, and the forward parts cancel instead, so the robot slides sideways. Mixing the four speeds gives any direction plus rotation. Mounting a wheel on the wrong corner breaks this, so check the left and right labels.
Choosing wheel size
Wheel speed is RPM x π x diameter. A 200 RPM motor with a 65 mm wheel gives about 0.68 m/s; the same motor with a 100 mm wheel gives about 1.05 m/s but needs about 1.5 times the torque for the same push. Larger wheels also roll over bumps more easily. Use the wheel speed calculator, and see choosing a motor for torque sizing.
Try it: Wheel speed calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Mounting mecanum wheels in the wrong corners.
- Using mecanum wheels on carpet or outdoors.
- Wheels with the wrong hub so they wobble or slip on the shaft.
- Big wheels on weak motors.
- A tiny caster that jams on carpet edges.
Frequently asked questions
How do mecanum wheels work?
Angled rollers let each wheel push partly sideways. By spinning the four wheels in different directions, the robot moves forwards, sideways, diagonally or spins in place.
What is the difference between mecanum and omni wheels?
Mecanum rollers sit at 45°, omni rollers at 90°. Mecanum robots use four wheels in a rectangle; omni robots often use three wheels at 120°.
What wheel size should I use for a robot car?
65 mm wheels suit TT and BO gear motors on small cars. Choose by the speed you want and the torque your motors provide.
Do I need a caster wheel?
A two-wheel robot needs a caster or skid for balance. Four-wheel robots do not.
Why does my robot not drive straight?
Motors differ slightly in speed. Use encoders and a PID loop, or trim each motor's PWM in code.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




