Component guide · Advanced · 8 min read
FPV 8 to 10 Inch Motors 2906 to 3120

3110, 3115 and 3120 from T-Motor, AxisFlying, MAD, iFlight, SunnySky and More for Long Range and Heavy Cinelifters
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
8 to 10 inch FPV drones use motors around 3110 to 3120. On 6S, about 900 KV suits 9 to 10 inch props; lower-KV versions run on 8S to 12S. These motors lift heavy cameras and fly long distances. They need big ESCs, strong frames and careful arming, because a 10 inch prop can cause serious injury.
Key specs at a glance
- Sizes
- 2906, 3008, 3110, 3115, 3120
- KV
- About 500 to 1,250 KV
- Battery
- 6S common, up to 12S on low KV
- Props
- 8 to 10 inch
- Mounting
- 19x19 or 25x25 mm
- ESC
- 60 A or more per motor
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Tarot TL2955 4008MT 330KV Brushless Motor₹5,039
Option 2Scorpion MII-3011-1100kv Cinematography Edition Drone Motor – 8″-9″ Prop₹7,998
Option 3iFlight XING2 3110 FPV Motor Unibell – 1250KV₹6,029
Option 4FLYCCI FA3115 1050KV Brushless Motor₹2,339
Option 5AxisFlying AF310 3010 Brushless Motor 1010KV – Cinelifter Drone₹3,269
Option 6AxisFlying AF310 3010 Brushless Motor 1010KV₹4,439
What the FPV 8 to 10 inch and X-class motors (2906 to 3120) is
FPV 8 to 10 inch and X-class motors are large brushless motors for heavy-lift, long-range and cinema drones, usually run on 6S to 12S.
Use 3110 or 3115 at about 900 KV on 6S for a 10 inch long-range or mapping FPV drone. Use 3120 at lower KV on 8S to 12S for heavy cinelifters. A 2906 or 3008 suits 8 inch props.
Check the thrust table at your exact prop and voltage, and keep hover throttle near 40 to 50 percent. Fly these only in open areas with all safety features set up.
FPV 8 to 10 inch and X-class motors (2906 to 3120) pinout
The pins on the FPV 8 to 10 inch and X-class motors (2906 to 3120) and what each one does.
| Pin | Function |
|---|---|
| Phase wires | Three wires to the ESC, any order; swap any two to reverse rotation |
| Mount holes | M3 or M4; check the bolt pattern (16x16, 19x19, 25x25 mm and up) |
| Shaft | Threaded M5 or M6 with a nut, or a prop adapter on large motors |
| Bell | The outer part that spins; keep it free of debris |
| Size code | First two digits stator width, last two stator height in mm (2806.5 = 28 x 6.5 mm) |
- Phase wires
- Three wires to the ESC, any order; swap any two to reverse rotation
- Mount holes
- M3 or M4; check the bolt pattern (16x16, 19x19, 25x25 mm and up)
- Shaft
- Threaded M5 or M6 with a nut, or a prop adapter on large motors
- Bell
- The outer part that spins; keep it free of debris
- Size code
- First two digits stator width, last two stator height in mm (2806.5 = 28 x 6.5 mm)
Wiring the FPV 8 to 10 inch and X-class motors (2906 to 3120)
Use thick battery leads and a low-ESR capacitor at the ESC. Remove props for all bench tests. Check screw length so it does not touch the motor windings.
| FPV 8 to 10 inch and X-class motors (2906 to 3120) pin | Connection | Note |
|---|---|---|
| Motor phase A, B, C | ESC motor pads or bullet connectors | Any order, reverse in software if needed |
| ESC power | Battery via XT60, XT90 or AS150 | Within the motor's cell rating |
| ESC signal | Flight controller motor output | DShot on FPV, PWM or DShot on ArduPilot |
- Motor phase A, B, C
- Connection:
- ESC motor pads or bullet connectors
- Note:
- Any order, reverse in software if needed
- ESC power
- Connection:
- Battery via XT60, XT90 or AS150
- Note:
- Within the motor's cell rating
- ESC signal
- Connection:
- Flight controller motor output
- Note:
- DShot on FPV, PWM or DShot on ArduPilot
Example code
Motor letters go clockwise from the front right in ArduPilot's motor test, not by output number.
1. Props OFF, battery connected through a smoke stopper.
2. Setup > Optional Hardware > Motor Test.
3. Set throttle to 5 to 10 percent and duration 2 s.
4. Test motors A, B, C, D in order and check position and spin direction against the frame diagram.
5. Swap any two phase wires on a motor that spins the wrong way.
6. Set MOT_SPIN_ARM and MOT_SPIN_MIN so all motors spin evenly at arming.Setup and tuning
low KV between about 600 and 1200, depending on prop size and cell count.
use single or 4-in-1 ESCs rated for the motor current and full battery voltage.
8 to 13 inch props; balance them and check for cracks each flight.
use a rigid frame with soft-mounted flight controller to reduce vibration.
use thick battery leads and a large low-ESR capacitor.
big props cause serious injury; arm only in open spaces, away from people.
What you need
Shop this list20 of 20 found in our store · ₹88,058
Tarot TL2955 4008MT 330KV Brushless Motor: the part this guide coversTarot TL2955 4008MT 330KV Brushless Motor₹5,039
Scorpion MII-3011-1100kv Cinematography Edition Drone Motor – 8″-9″ Prop: another version this guide coversScorpion MII-3011-1100kv Cinematography Edition Drone Motor – 8″-9″ Prop₹7,998
iFlight XING2 3110 FPV Motor Unibell – 1250KV: another version this guide coversiFlight XING2 3110 FPV Motor Unibell – 1250KV₹6,029
FLYCCI FA3115 1050KV Brushless Motor: another version this guide coversFLYCCI FA3115 1050KV Brushless Motor₹2,339
AxisFlying AF310 3010 Brushless Motor 1010KV – Cinelifter Drone: another version this guide coversAxisFlying AF310 3010 Brushless Motor 1010KV – Cinelifter Drone₹3,269
AxisFlying AF310 3010 Brushless Motor 1010KV: another version this guide coversAxisFlying AF310 3010 Brushless Motor 1010KV₹4,439
MAD Components Components CM 3120 BANSHEE FPV Drone Motor 1000KV-6S: another version this guide coversMAD Components CM 3120 BANSHEE FPV Drone Motor 1000KV-6S₹7,569Closest match, check the specs
MAD Components Components CM 3115 TAURUS FPV Drone Motor 1050KV-6S: another version this guide coversMAD Components CM 3115 TAURUS FPV Drone Motor 1050KV-6S₹8,429Closest match, check the specs
MAD Components Components BSC 3115 V1.0 1050KV 6S Brushless Motor – M5 Nut: another version this guide coversMAD Components BSC 3115 V1.0 1050KV 6S Brushless Motor – M5 Nut₹5,829
T-Motor Velox V3115 1050KV Brushless Motor: another version this guide coversT-Motor Velox V3115 1050KV Brushless Motor₹6,359
T-Motor Velox V3008 1500KV 6S Motor for 7-8″ Long-Range FPV Drones: another version this guide coversT-Motor Velox V3008 1500KV 6S Motor for 7-8″ Long-Range FPV Drones₹4,249
T-Motor Velox V3008 1350KV 6S Long-Range FPV Motor – 16x19mm M3 Mount: another version this guide coversT-Motor Velox V3008 1350KV 6S Long-Range FPV Motor – 16x19mm M3 Mount₹4,269
T-Motor Velox V3008 1155KV 6S Long-Range Motor – 7-8″ Prop Compatible: another version this guide coversT-Motor Velox V3008 1155KV 6S Long-Range Motor – 7-8″ Prop Compatible₹4,479
Surpass Hobby Bat S3110 14 Pole FPV Motor 1580 KV: another version this guide coversSurpass Hobby Bat S3110 14 Pole FPV Motor 1580 KV₹2,459
Surpass Hobby Bat S3110 14 Pole FPV Motor 1280 KV: another version this guide coversSurpass Hobby Bat S3110 14 Pole FPV Motor 1280 KV₹2,409
Surpass Hobby Bat B3110 14 Pole FPV Motor 1580 KV: another version this guide coversSurpass Hobby Bat B3110 14 Pole FPV Motor 1580 KV₹2,098
DYS X3115 1200KV FPV Motor: another version this guide coversDYS X3115 1200KV FPV Motor₹2,259
DYS X3115 1050KV FPV Motor: another version this guide coversDYS X3115 1050KV FPV Motor₹2,259
QPT 3115 KV900 Brushless Motor: another version this guide coversQPT 3115 KV900 Brushless Motor₹3,879
CAELUS FA3115 400KV Brushless Motor: another version this guide coversCAELUS FA3115 400KV Brushless Motor₹2,399
Alternatives and when to choose them
- 7 inch long range motors: smaller props.
- Multirotor motors 35xx to 45xx: larger, slower props.
- Heavy-lift and industrial ESCs: ESC options.
Common mistakes to avoid
- Flying unbalanced or cracked props.
- Building on a flexible frame.
- Using ESCs rated below the battery voltage.
- Arming near people or on the bench with props on.
Frequently asked questions
Which KV suits 10 inch props?
Low KV around 700 to 1000 on 6S, and lower on 8S or more.
What is an X-class drone?
A large racing class using frames and props of about 13 inches.
Why does my large build shake in flight?
Props are unbalanced, the frame flexes, or filtering is not tuned for low RPM.
Can I use a 4-in-1 ESC on these motors?
Yes, if it is rated for the motor current and the full battery voltage.
Are large FPV props dangerous?
Yes. They can cause deep cuts, so always remove props on the bench.
Parts for this guide
- ₹5,039View
- ₹7,998View
- ₹6,029View
- ₹2,339View
- ₹3,269View
- ₹4,439View
- ₹7,569View
- ₹8,429View
- ₹5,829View
- ₹6,359View
- ₹4,249View
- ₹4,269View
- ₹4,479View
- ₹2,459View
- ₹2,409View
- ₹2,098View
- ₹2,259View
- ₹2,259View
- ₹3,879View
- ₹2,399View
- ₹8,695View
- ₹8,039View
- ₹2,769View
- ₹3,894View
- ₹5,819View
- ₹2,339View
- ₹2,339View
- ₹2,819View
- ₹2,709View
- ₹3,309View
- ₹2,236View
- ₹5,729View
- ₹12,799View
- ₹8,429View
- ₹6,359View
- ₹5,659View
- ₹5,829View
- ₹5,299View
- ₹7,949View
- ₹7,359View
- ₹6,359View
- ₹6,359View
- ₹6,069View
- ₹1,429View
- ₹3,669View
- ₹3,869View
- ₹5,459View
- ₹5,519View
- ₹2,750View
- ₹2,750View
- ₹2,808View
- ₹779View
- ₹650View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

































