Component guide · Intermediate · 4 min read
Hi-Link HLK-LD012, LD016, LD017, LD021

5.8 GHz) and LD102, LD104, LD105, LD1010 to LD1040 (10 GHz) Motion Radars
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Hi-Link's 5.8 GHz and 10 GHz radars are small motion sensors for lights, smart switches and battery devices. The LD012 runs on very low power at 3.3 V, the LD017 adds I2C, and the 10 GHz LD102 to LD1040 series covers wall and ceiling mounting. All give a GPIO output on motion, and most let you set range and hold time over UART.
Key specs at a glance
- Frequency
- 5.8 GHz (LD012, LD016, LD017, LD021) or 10 GHz X-band (LD10x)
- Supply
- 3.3 V on most; check the datasheet
- Range
- About 3 to 12 m, adjustable
- Output
- GPIO high on motion; UART or I2C for settings
- Power
- Microamps to a few mA (LD012 is ultra-low power)
- Mounting
- Wall or ceiling (LD1020 has a 110 degree ceiling beam)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Hi-Link HLK-LD012 5.8GHz Motion Detection Radar Sensor – 3.3V Ultra-Low Power₹219
Option 2Hi-Link HLK-LD016 5.8GHz Motion Detection Radar Sensor Module₹297
Option 3Hi-Link HLK-LD017 5.8GHz Radar Motion Sensor Module – I2C/GPIO, 10m Range₹147
Option 4Hi-Link HLK-LD021 5.8GHz Radar Sensor Module, Human Presence & Motion Detection, Detection Range: 10-12m Radial – TTL Output₹74
Option 5Hi-Link HLK-LD1010 10GHz Motion Detection Radar Sensor Module₹123
Option 6Hi-Link HLK-LD102 10GHz X-Band Motion Detection Radar Sensor Module₹190
What the Hi-Link LD012, LD017, LD102 and LD1020 radar modules is
HLK-LD 5.8 GHz and 10 GHz radar modules from Hi-Link, such as the LD105 and LD303, are microwave motion sensors that switch an output when they detect movement, for lights and alarms.
These are motion sensors, not presence sensors: they see movement and hold the output for a set time. For people sitting still, use a 24 GHz FMCW radar such as the LD2410.
The UART lets you change sensitivity, delay and light threshold with Hi-Link's PC tool, then the module runs on its own.
Hi-Link LD012, LD017, LD102 and LD1020 radar modules pinout
The pins on the Hi-Link LD012, LD017, LD102 and LD1020 radar modules and what each one does.
| Pin | Function |
|---|---|
| 3V3 / VCC | Supply |
| GND | Ground |
| OUT | Motion output |
| TX / RX | UART for settings |
| SDA / SCL | I2C (LD017) |
- 3V3 / VCC
- Supply
- GND
- Ground
- OUT
- Motion output
- TX / RX
- UART for settings
- SDA / SCL
- I2C (LD017)
Wiring the Hi-Link LD012, LD017, LD102 and LD1020 radar modules
Most modules are 3.3 V parts; do not feed 5 V unless the datasheet allows it. OUT alone is enough for simple use.
| Hi-Link LD012, LD017, LD102 and LD1020 radar modules pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5 V | 5 V (VIN) or 3.3 V (check module) |
| GND | GND | GND |
| Radar TX | D10 (SoftwareSerial RX, low baud only) | GPIO 16 (RX2) |
| Radar RX | D11 | GPIO 17 (TX2) |
| OUT (if fitted) | D2 | GPIO 27 |
- VCC
- Arduino Uno:
- 5 V
- ESP32:
- 5 V (VIN) or 3.3 V (check module)
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- Radar TX
- Arduino Uno:
- D10 (SoftwareSerial RX, low baud only)
- ESP32:
- GPIO 16 (RX2)
- Radar RX
- Arduino Uno:
- D11
- ESP32:
- GPIO 17 (TX2)
- OUT (if fitted)
- Arduino Uno:
- D2
- ESP32:
- GPIO 27
Example code
A minimal sketch to check the part works.
// Motion radar with a digital OUT pin: HIGH while motion is seen (plus the hold time)
const int RADAR = 2; // ESP32: use GPIO 27
const int LED = 13;
void setup() {
pinMode(RADAR, INPUT);
pinMode(LED, OUTPUT);
Serial.begin(115200);
}
void loop() {
bool motion = digitalRead(RADAR);
digitalWrite(LED, motion);
static bool last = false;
if (motion != last) { Serial.println(motion ? "Motion" : "Clear"); last = motion; }
delay(20);
}Setup and tuning
feed 3.3 to 5 V as rated, with a clean supply.
the OUT pin goes HIGH on motion; connect it to a digital pin or a transistor for a light.
adjust with the onboard resistor, jumper or UART settings, depending on the model.
point away from fans, curtains and moving trees, which cause false triggers.
radar passes plastic and glass, so you can hide it behind a cover.
What you need
Shop this list15 of 16 found in our store · ₹2,265
Hi-Link HLK-LD012 5.8GHz Motion Detection Radar Sensor – 3.3V Ultra-Low Power: the part this guide coversHi-Link HLK-LD012 5.8GHz Motion Detection Radar Sensor – 3.3V Ultra-Low Power₹219
Hi-Link HLK-LD016 5.8GHz Motion Detection Radar Sensor Module: another version this guide coversHi-Link HLK-LD016 5.8GHz Motion Detection Radar Sensor Module₹297
Hi-Link HLK-LD017 5.8GHz Radar Motion Sensor Module – I2C/GPIO, 10m Range: another version this guide coversHi-Link HLK-LD017 5.8GHz Radar Motion Sensor Module – I2C/GPIO, 10m Range₹147
Hi-Link HLK-LD021 5.8GHz Radar Sensor Module, Human Presence & Motion Detection, Detection Range: 10-12m Radial – TTL Output: another version this guide coversHi-Link HLK-LD021 5.8GHz Radar Sensor Module, Human Presence & Motion Detection, Detection Range: 10-12m Radial – TTL Output₹74
Hi-Link HLK-LD1010 10GHz Motion Detection Radar Sensor Module: another version this guide coversHi-Link HLK-LD1010 10GHz Motion Detection Radar Sensor Module₹123
Hi-Link HLK-LD102 10GHz X-Band Motion Detection Radar Sensor Module: another version this guide coversHi-Link HLK-LD102 10GHz X-Band Motion Detection Radar Sensor Module₹190
Hi-Link HLK-LD1020 10GHz Motion Detection Radar Sensor – Ceiling Mount, 110° Beam Angle: another version this guide coversHi-Link HLK-LD1020 10GHz Motion Detection Radar Sensor – Ceiling Mount, 110° Beam Angle₹113
Hi-Link HLK-LD1020-P 10GHz Radar Motion Sensor Module, Human Presence Detection, Range: 12m: another version this guide coversHi-Link HLK-LD1020-P 10GHz Radar Motion Sensor Module, Human Presence Detection, Range: 12m₹79
Hi-Link HLK-LD1030 10GHz X-Band Motion Detection Radar Sensor Module: another version this guide coversHi-Link HLK-LD1030 10GHz X-Band Motion Detection Radar Sensor Module₹120
Hi-Link HLK-LD104 10GHz Motion Detection Radar Sensor Module: another version this guide coversHi-Link HLK-LD104 10GHz Motion Detection Radar Sensor Module₹102
Hi-Link HLK-LD1040 10GHz X-Band Motion Detection Radar Sensor Module: another version this guide coversHi-Link HLK-LD1040 10GHz X-Band Motion Detection Radar Sensor Module₹115
Hi-Link HLK-LD105 10GHz X-Band Microwave Motion Sensor – 3-5m Range, 110° Angle: another version this guide coversHi-Link HLK-LD105 10GHz X-Band Microwave Motion Sensor – 3-5m Range, 110° Angle₹185
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389
USB to TTL serial converter: to talk to the module from a PCUSB to TTL Serial Converter (CH340G / CP2102 / FT232RL / PL2303)₹85Closest match, check the specs- Hi-Link HLK-LD2410 24 GHz presence radar: the most common hobby presence radarFind this part
RCWL-0516 microwave radar motion sensor: the cheapest microwave motion moduleRCWL-0516 Microwave Radar Motion Sensor Module₹27
Alternatives and when to choose them
- LD2410 presence radar: detects people sitting still.
- Microwave motion modules: simple 5 V boards with knobs.
- Moresense radars: similar 5.8 and 10 GHz modules.
Common mistakes to avoid
- Mounting it facing a fan or curtain.
- Placing it behind metal.
- Setting sensitivity too high.
- Expecting presence detection of still people.
Frequently asked questions
How is a radar sensor different from a PIR?
Radar senses movement through plastic and does not need heat; PIR only sees warm bodies.
Why does the radar trigger with no one there?
Fans, curtains or vibration are moving; reduce sensitivity or change the angle.
Can the radar detect someone sitting still?
These motion modules see small moves; use an mmWave presence radar for still people.
Can I hide it behind a plastic cover?
Yes. Plastic and glass let radar through, but metal blocks it.
Can I connect the output to an ESP32?
Yes. The output is usually 3.3 V logic; check the datasheet.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

