Component guide · Intermediate · 3 min read
mmWave and Microwave Presence Sensors
LD2410 and RCWL-0516
By Geekobot Learning Team · Updated 24 Oct 2026
On this page
Radar presence sensors send out radio waves and detect reflections from people. The 24 GHz mmWave HLK-LD2410 senses tiny movements such as breathing, so it can tell that someone is still in the room, which a PIR cannot. It has an OUT pin and a UART for distance and settings. The cheap RCWL-0516 microwave module detects motion only, through thin walls and plastic, with one output pin.
Key specs at a glance
- LD2410
- 24 GHz FMCW radar, detects moving and still people up to about 6 m
- LD2410 interface
- OUT pin plus UART (256000 baud) for distance and tuning
- LD2410 supply
- 5 V; 3.3 V logic
- RCWL-0516
- About 3.2 GHz Doppler, motion only, 5 to 7 m
- RCWL-0516 supply
- 4 to 28 V; 3.3 V HIGH output for about 2 s
- vs PIR
- Radar sees still people (LD2410) and works through plastic; PIR needs moving heat
LD2410 vs RCWL-0516 vs PIR
| LD2410 (mmWave) | RCWL-0516 (microwave) | PIR (HC-SR501) | |
|---|---|---|---|
| Detects people sitting still | Yes | No | No |
| Through plastic or thin walls | Yes | Yes | No |
| Distance information | Yes, in 0.75 m gates | No | No |
| False triggers | Fans, curtains moving | Moving objects, other rooms | Heat sources, sunlight |
| Wiring | OUT pin or UART | One output pin | One output pin |
| Typical use | Room occupancy for lights and AC | Corridor and porch lights | Alarms, simple motion lights |
- Detects people sitting still
- LD2410 (mmWave):
- Yes
- RCWL-0516 (microwave):
- No
- PIR (HC-SR501):
- No
- Through plastic or thin walls
- LD2410 (mmWave):
- Yes
- RCWL-0516 (microwave):
- Yes
- PIR (HC-SR501):
- No
- Distance information
- LD2410 (mmWave):
- Yes, in 0.75 m gates
- RCWL-0516 (microwave):
- No
- PIR (HC-SR501):
- No
- False triggers
- LD2410 (mmWave):
- Fans, curtains moving
- RCWL-0516 (microwave):
- Moving objects, other rooms
- PIR (HC-SR501):
- Heat sources, sunlight
- Wiring
- LD2410 (mmWave):
- OUT pin or UART
- RCWL-0516 (microwave):
- One output pin
- PIR (HC-SR501):
- One output pin
- Typical use
- LD2410 (mmWave):
- Room occupancy for lights and AC
- RCWL-0516 (microwave):
- Corridor and porch lights
- PIR (HC-SR501):
- Alarms, simple motion lights
Wiring
LD2410: 5 V and GND to power, OUT to a digital pin for simple presence, and TX and RX to a UART for detailed data. The module's pins are 1.27 mm pitch on some versions; the LD2410C has 2.54 mm headers, which are easier to use. HLK's phone app (over Bluetooth on the B and C versions) sets the sensitivity of each distance gate. ESPHome and Home Assistant support it directly, which makes it a popular choice for MQTT and Home Assistant projects.
RCWL-0516: VIN 4 to 28 V, GND, and OUT to a digital pin. Keep metal and wiring away from the component side and leave about 1 cm clear behind it.
Placement and tuning
Radar sees through plastic enclosures and plasterboard, so it may detect people in the next room; reduce the maximum gate or lower sensitivity. Mount it away from fans, AC vents and swaying curtains. For lighting, combine a PIR for fast 'someone entered' detection with an LD2410 to keep the lights on while people sit still.
Try it: Frequency wavelength calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Expecting an RCWL-0516 to detect someone sitting still.
- Mounting next to a ceiling fan.
- Driving the LD2410 UART at 9600 baud instead of its default 256000.
- Detecting people through a wall because sensitivity is too high.
- Putting a metal enclosure around a radar sensor.
Frequently asked questions
What is the difference between mmWave and PIR sensors?
PIR needs a warm body to move. mmWave radar detects tiny movements like breathing, so it knows when someone is sitting still.
Can the RCWL-0516 detect a person who is not moving?
No. It is a Doppler motion sensor, so it needs movement.
Does the LD2410 work with ESP32 and Home Assistant?
Yes. ESPHome has a built-in LD2410 component that exposes presence, distance and gate settings.
Can a radar sensor see through walls?
Through thin plaster, wood, glass and plastic, yes, which can cause triggers from the next room. Metal and concrete block it.
Is mmWave radar safe?
Yes. These modules transmit at very low power, far below exposure limits.
Parts for this guide
- ₹74View
Calculators
Terms in this guide
Projects that use it
Put this into practice: 10 step-by-step builds in our project library use parts from this guide.
Keep learning
Sources
- Hi-Link HLK-LD2410 datasheet and protocol document
- RCWL-0516 module schematic and RCWL-9196 IC data
- ESPHome LD2410 component documentation
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

