Component guide · Advanced · 4 min read
Industrial Linux Gateways and Edge Controllers

EDATEC CM4 NANO and CM4SEN, Industrial Shields GateBerry, Seeed EdgeBox RPi 200 and reComputer R1225, M5Stack STM32MP135 Gateway and RAKwireless WisGate Edge Lite 2
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are finished Linux computers for panels and sites. Most use a Raspberry Pi Compute Module 4 inside a metal case with DIN-rail mounting, wide-range power, RS485, CAN and often 4G. Run Node-RED, Docker or your own Python to collect Modbus data and send it to the cloud. reComputer R1225 and RAK7268V2 also include a LoRaWAN gateway.
Key specs at a glance
- Computer
- Raspberry Pi CM4 on most; STM32MP135 on the M5Stack gateway
- Interfaces
- Ethernet, RS485, RS232, CAN, DI/DO
- Wireless
- Wi-Fi, BLE, 4G option, LoRaWAN on R1225 and RAK7268
- Power
- 9-36V or 12-24V DC wide input
- Mounting
- DIN rail or wall
- Software
- Raspberry Pi OS, Node-RED, Docker, ChirpStack on gateways
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1EDATEC CM4 NANO Industrial Baseboard w/ Raspberry Pi CM4, 4GB RAM, 8GB eMMC, WiFi₹15,719
Option 2EDATEC CM4NANO Baseboard w/ CM4108008 Antenna, Metal Case, 8GB RAM, 8GB eMMC₹21,359
Option 3EDATEC ED-CM4NANO10-0108-C CM4 Baseboard w/ Antenna & Case₹12,849
Option 4EDATEC ED-CM4NANO10-1208-C CM4 Baseboard w/ WiFi, Antenna, Metal Case₹12,679
Option 5EDATEC ED-CM4SEN CM4 Baseboard w/ 4G, WiFi, RS485, CAN, 1GB RAM, 8GB eMMC₹19,909
Option 6EDATEC ED-CM4SEN CM4 Industrial IoT Baseboard w/ 4G, RS485, CAN₹20,999
What the Industrial Linux gateways and edge controllers (EDATEC CM4, EdgeBox RPi 200, reComputer R1225, GateBerry, M5Stack MP135, RAK7268) is
Industrial Linux gateways and edge controllers are rugged computers with RS485, CAN, Ethernet, 4G and digital I/O for collecting machine data and running control logic at the edge.
Start with Node-RED: install the node-red-contrib-modbus nodes, poll a meter over RS485, then publish to MQTT or a dashboard. Use the eMMC for the OS and keep logs small so the storage lasts.
For LoRaWAN, set the gateway's frequency plan to IN865 for India and connect it to The Things Network or a local ChirpStack server.
Industrial Linux gateways and edge controllers (EDATEC CM4, EdgeBox RPi 200, reComputer R1225, GateBerry, M5Stack MP135, RAK7268) pinout
The pins on the Industrial Linux gateways and edge controllers (EDATEC CM4, EdgeBox RPi 200, reComputer R1225, GateBerry, M5Stack MP135, RAK7268) and what each one does.
| Pin | Function |
|---|---|
| DC input | Screw terminal, wide range |
| RS485 / CAN | Isolated terminals on most |
| Ethernet | One or two ports |
| SIM slot | On 4G versions |
| Antennas | Wi-Fi, 4G, LoRa |
- DC input
- Screw terminal, wide range
- RS485 / CAN
- Isolated terminals on most
- Ethernet
- One or two ports
- SIM slot
- On 4G versions
- Antennas
- Wi-Fi, 4G, LoRa
Wiring the Industrial Linux gateways and edge controllers (EDATEC CM4, EdgeBox RPi 200, reComputer R1225, GateBerry, M5Stack MP135, RAK7268)
Fit LoRa and 4G antennas before powering. Use a UPS or supercap option where power cuts are frequent.
| Industrial Linux gateways and edge controllers (EDATEC CM4, EdgeBox RPi 200, reComputer R1225, GateBerry, M5Stack MP135, RAK7268) pin | Connection | Note |
|---|---|---|
| Power | 24V DIN supply | Check polarity |
| RS485 | A/B to meters | Terminate the end |
| Antennas | All fitted before power | Especially LoRa and 4G |
- Power
- Connection:
- 24V DIN supply
- Note:
- Check polarity
- RS485
- Connection:
- A/B to meters
- Note:
- Terminate the end
- Antennas
- Connection:
- All fitted before power
- Note:
- Especially LoRa and 4G
Example code
Find the RS485 device name (for example /dev/ttyAMA2 or /dev/ttyS1) in the maker's wiki before configuring the Modbus node.
# Node-RED official install script for Raspberry Pi OS / Debian
bash <(curl -sL https://github.com/node-red/linux-installers/releases/latest/download/update-nodejs-and-nodered-deb)
sudo systemctl enable --now nodered
# add Modbus nodes
cd ~/.node-red
npm install node-red-contrib-modbus
sudo systemctl restart nodered
# open http://<gateway-ip>:1880Setup and tuning
use the stated DC input (often 9 to 36 V) with surge protection.
connect Ethernet or a 4G SIM; set up a secure VPN for remote access.
wire RS485 or CAN with termination and shielded cable.
use Node-RED, Docker or the vendor platform to read Modbus and send MQTT.
change default passwords and keep the firmware updated.
What you need
Shop this list12 of 13 found in our store · ₹3,05,156
EDATEC CM4 NANO Industrial Baseboard w/ Raspberry Pi CM4, 4GB RAM, 8GB eMMC, WiFi: the part this guide coversEDATEC CM4 NANO Industrial Baseboard w/ Raspberry Pi CM4, 4GB RAM, 8GB eMMC, WiFi₹15,719
EDATEC CM4NANO Baseboard w/ CM4108008 Antenna, Metal Case, 8GB RAM, 8GB eMMC: another version this guide coversEDATEC CM4NANO Baseboard w/ CM4108008 Antenna, Metal Case, 8GB RAM, 8GB eMMC₹21,359
EDATEC ED-CM4NANO10-0108-C CM4 Baseboard w/ Antenna & Case: another version this guide coversEDATEC ED-CM4NANO10-0108-C CM4 Baseboard w/ Antenna & Case₹12,849
EDATEC ED-CM4NANO10-1208-C CM4 Baseboard w/ WiFi, Antenna, Metal Case: another version this guide coversEDATEC ED-CM4NANO10-1208-C CM4 Baseboard w/ WiFi, Antenna, Metal Case₹12,679
EDATEC ED-CM4SEN CM4 Baseboard w/ 4G, WiFi, RS485, CAN, 1GB RAM, 8GB eMMC: another version this guide coversEDATEC ED-CM4SEN CM4 Baseboard w/ 4G, WiFi, RS485, CAN, 1GB RAM, 8GB eMMC₹19,909
EDATEC ED-CM4SEN CM4 Industrial IoT Baseboard w/ 4G, RS485, CAN: another version this guide coversEDATEC ED-CM4SEN CM4 Industrial IoT Baseboard w/ 4G, RS485, CAN₹20,999
Industrial Shields GateBerry Raspberry Pi-Based Industrial Gateway: another version this guide coversIndustrial Shields GateBerry Raspberry Pi-Based Industrial Gateway₹32,306
Seeed Studio EdgeBox RPi 200 Industrial Edge Controller: another version this guide coversSeeed Studio EdgeBox RPi 200 Industrial Edge Controller₹51,100
Seeed Studio Studio reComputer R1225 LoRaWAN Gateway & Industrial Controller (EU868), CM4-Powered: another version this guide coversSeeed Studio reComputer R1225 LoRaWAN Gateway & Industrial Controller (EU868), CM4-Powered₹43,099
Seeed Studio Studio reComputer R1225 LoRaWAN Gateway & Industrial Controller (US915), CM4-Powered: another version this guide coversSeeed Studio reComputer R1225 LoRaWAN Gateway & Industrial Controller (US915), CM4-Powered₹43,099
M5Stack STM32MP135 Industrial IoT Gateway w/ Cortex-A7, 2x GbE, CAN FD, RS485: another version this guide coversM5Stack STM32MP135 Industrial IoT Gateway w/ Cortex-A7, 2x GbE, CAN FD, RS485₹9,089
RAKwireless WisGate Edge Lite 2 RAK7268V2 Gateway (Non-LTE, White, RAK2287, IN865): another version this guide coversRAKwireless WisGate Edge Lite 2 RAK7268V2 Gateway (Non-LTE, White, RAK2287, IN865)₹22,949- USB to RS485 converter: to test Modbus devices from a PCFind this part
Alternatives and when to choose them
- CM4 carrier boards: bare boards.
- Teltonika routers: routers with Modbus.
- LoRaWAN nodes and gateways: LoRaWAN basics.
Common mistakes to avoid
- Leaving default passwords.
- Exposing the gateway to the internet.
- Skipping RS485 termination.
- Running safety logic on the gateway.
Frequently asked questions
What does an edge gateway do?
It reads machine data, processes it locally and sends it to the cloud or SCADA.
Can I run Node-RED on it?
Most Linux gateways support Node-RED or Docker containers.
Do I need a VPN for remote access?
Yes, never expose the gateway directly to the internet.
Why do Modbus reads fail?
Wrong baud rate, slave ID, wiring or termination.
Can it control machines?
Yes, through its I/O, but safety logic must stay in certified PLCs.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

