Component guide · Advanced · 5 min read
Compute Module 4 Carrier Boards

Official CM4 IO Board, Waveshare Nano and Mini Bases, Dual Ethernet, PoE UPS, DFRobot Router, DeskPi Super6C and EDATEC Industrial
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A Compute Module 4 has no ports of its own; a carrier board gives it power, USB, Ethernet, HDMI, camera and GPIO. The official IO board exposes everything for development. Waveshare Nano and Mini bases make tiny products, dual Ethernet boards build routers and firewalls, the DeskPi Super6C holds six modules as a cluster, and EDATEC and industrial boards add 4G, RS485 and DIN cases.
Key specs at a glance
- Module
- CM4 (some also CM4S / CM3 boards)
- Network
- 1 to 2 Gigabit ports, Wi-Fi 6 on some
- Storage
- microSD (Lite) and M.2 NVMe on some
- Video
- HDMI, CSI and DSI on most
- Power
- 5V USB-C or 7 to 36V DC
- Extras
- 4G, PoE, RS485, RTC, UPS depending on board
A shorted, over-charged or damaged lithium cell can get very hot and catch fire. Use a protection board or BMS, never short the terminals, charge on a non-flammable surface and do not leave a charging pack alone. Throw away cells that are swollen or dented.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Raspberry Pi Compute Module 4 I/O Board₹3,669
Option 2Waveshare Nano Base Board (A) for Raspberry Pi CM4₹1,459
Option 3Waveshare Nano Base Board (B) for Raspberry Pi CM4₹1,819
Option 4Waveshare Nano Base Board (C) for Raspberry Pi CM4₹3,359
Option 5Waveshare Mini Base Board (C) for Raspberry Pi CM4₹2,829
Option 6Waveshare Mini Dual Gigabit Ethernet Base Board for CM4₹3,539
What the Compute Module 4 carrier and base boards is
Compute Module 4 carrier boards hold a Raspberry Pi CM4 and break out its ports, so you get Pi 4 power in a custom or compact shape.
Pick the carrier by the product you are building: Nano bases for embedded size, dual Ethernet bases for routers, PoE UPS for unattended devices, and the official IO board for prototyping with a PCIe slot.
Adapter boards (CM4 to Pi 4B, BigTreeTech Pi4B adapter) let a CM4 replace a Pi 4 in existing cases and 3D printer boards. The CMIO Plus and PoE CM IO boards are for the older CM3 and CM4S.
Compute Module 4 carrier and base boards pinout
The pins on the Compute Module 4 carrier and base boards and what each one does.
| Pin | Function |
|---|---|
| 2 x 100-pin connectors | Hold the Compute Module and carry PCIe, USB, Ethernet, HDMI, CSI, DSI and GPIO |
| nRPIBOOT / BOOT switch | Puts an eMMC module into USB flashing mode |
| Power input | USB-C 5V or 7 to 36V DC on industrial boards |
| 40-pin header | Standard HAT GPIO on most carriers |
- 2 x 100-pin connectors
- Hold the Compute Module and carry PCIe, USB, Ethernet, HDMI, CSI, DSI and GPIO
- nRPIBOOT / BOOT switch
- Puts an eMMC module into USB flashing mode
- Power input
- USB-C 5V or 7 to 36V DC on industrial boards
- 40-pin header
- Standard HAT GPIO on most carriers
Wiring the Compute Module 4 carrier and base boards
Line the module up with both connectors and press straight down on the centre; never rock it. Lite modules (no eMMC) boot from the carrier's microSD slot instead.
| Compute Module 4 carrier and base boards pin | Step | Note |
|---|---|---|
| Module | Press both connectors down evenly | Fit the heatsink after |
| Flashing (eMMC) | BOOT switch on, USB to a PC, run rpiboot | Then Raspberry Pi Imager |
| Power | Carrier input, not the module | Check the voltage range |
- Module
- Step:
- Press both connectors down evenly
- Note:
- Fit the heatsink after
- Flashing (eMMC)
- Step:
- BOOT switch on, USB to a PC, run rpiboot
- Note:
- Then Raspberry Pi Imager
- Power
- Step:
- Carrier input, not the module
- Note:
- Check the voltage range
Example code
Add dtoverlay=dwc2,dr_mode=host to config.txt to enable the USB 2.0 ports on CM4 carriers. Second Ethernet ports usually need no driver on recent Raspberry Pi OS.
# On Linux or Raspberry Pi OS (Windows: use the rpiboot installer)
sudo apt install git libusb-1.0-0-dev pkg-config build-essential
git clone --depth=1 https://github.com/raspberrypi/usbboot
cd usbboot && make
# Set the carrier's BOOT switch / jumper, connect its USB port, power on
sudo ./rpiboot -d mass-storage-gadget64
# The eMMC now appears as a USB drive: write it with Raspberry Pi ImagerSetup and tuning
CM4 modules with eMMC are flashed with rpiboot over USB; Lite modules boot from SD.
fit the boot jumper (nRPIBOOT) to flash eMMC, then remove it.
use the carrier's rated supply; peripherals and PCIe cards add load.
turn on USB, CSI and DSI ports in config.txt where the carrier needs it (for example dtoverlay=dwc2).
add a heatsink to the CM4 for sustained loads.
What you need
Shop this list20 of 20 found in our store · ₹1,16,672
Raspberry Pi Compute Module 4 I/O Board: the part this guide coversRaspberry Pi Compute Module 4 I/O Board₹3,669
Waveshare Nano Base Board (A) for Raspberry Pi CM4: another version this guide coversWaveshare Nano Base Board (A) for Raspberry Pi CM4₹1,459
Waveshare Nano Base Board (B) for Raspberry Pi CM4: another version this guide coversWaveshare Nano Base Board (B) for Raspberry Pi CM4₹1,819
Waveshare Nano Base Board (C) for Raspberry Pi CM4: another version this guide coversWaveshare Nano Base Board (C) for Raspberry Pi CM4₹3,359
Waveshare Mini Base Board (C) for Raspberry Pi CM4: another version this guide coversWaveshare Mini Base Board (C) for Raspberry Pi CM4₹2,829
Waveshare Mini Dual Gigabit Ethernet Base Board for CM4: another version this guide coversWaveshare Mini Dual Gigabit Ethernet Base Board for CM4₹3,539
Waveshare Dual Gigabit Ethernet Base Board for Raspberry Pi CM4: another version this guide coversWaveshare Dual Gigabit Ethernet Base Board for Raspberry Pi CM4₹5,329
Waveshare Dual ETH Quad RS485 Base Board (B) for CM4: another version this guide coversWaveshare Dual ETH Quad RS485 Base Board (B) for CM4₹5,229
Waveshare WIFI6 Dual ETH Base Board for CM4: another version this guide coversWaveshare WIFI6 Dual ETH Base Board for CM4₹4,669
Waveshare PoE UPS Base for CM4, Gigabit Ethernet, HDMI: another version this guide coversWaveshare PoE UPS Base for CM4, Gigabit Ethernet, HDMI₹6,019
Waveshare Industrial IoT Wireless Expansion for CM4: another version this guide coversWaveshare Industrial IoT Wireless Expansion for CM4₹11,049
Waveshare CM4 to Pi 4B Adapter Board for CM4 Lite/eMMC: another version this guide coversWaveshare CM4 to Pi 4B Adapter Board for CM4 Lite/eMMC₹2,139
Waveshare CM4 Interface Protection Adapter Board: another version this guide coversWaveshare CM4 Interface Protection Adapter Board₹819
BigTreeTech Pi4B Adapter Board for Raspberry Pi CM4: another version this guide coversBigTreeTech Pi4B Adapter Board for Raspberry Pi CM4₹1,489
DFRobot PiTray mini Carrier for Raspberry Pi CM4: another version this guide coversDFRobot PiTray mini Carrier for Raspberry Pi CM4₹1,749
DFRobot CM4 Router Carrier Board Mini: another version this guide coversDFRobot CM4 Router Carrier Board Mini₹2,939
DeskPi Super6C Mini-ITX Cluster Board for CM4: another version this guide coversDeskPi Super6C Mini-ITX Cluster Board for CM4₹24,069
EDATEC ED-CM4IND10 CM4 Industrial Baseboard 2G/32G 4G/WiFi: another version this guide coversEDATEC ED-CM4IND10 CM4 Industrial Baseboard 2G/32G 4G/WiFi₹26,429
EDATEC CM4 IO Case for Raspberry Pi Compute Module 4: another version this guide coversEDATEC CM4 IO Case for Raspberry Pi Compute Module 4₹2,691
Waveshare Mini-computer Add-ons for Raspberry Pi CMs (without PA): another version this guide coversWaveshare Mini-computer Add-ons for Raspberry Pi CMs (without PA)₹5,379
Alternatives and when to choose them
- CM5 carrier boards: for the newer module.
- Compute Modules: pick the module.
- Industrial 4G routers: ready-made boxes.
Common mistakes to avoid
- Leaving the boot jumper on after flashing.
- Using a weak supply when adding PCIe devices.
- Expecting an SD card to boot an eMMC module.
- Running sustained loads with no heatsink.
Frequently asked questions
How do I flash a CM4 with eMMC?
Fit the boot jumper, connect USB, run rpiboot, then flash it with Raspberry Pi Imager.
Why does the USB port not work on my carrier?
Some carriers need USB enabled in config.txt, such as dtoverlay=dwc2,dr_mode=host.
Can I use an NVMe SSD?
Yes, on carriers with a PCIe M.2 slot.
Will a CM5 fit a CM4 carrier?
The CM5 shares the connector, but check the carrier supports it and its power needs.
Which carrier is best for a small project?
Small bases from Waveshare suit compact builds; the official IO board suits development.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





