Buying guide · Advanced · 3 min read
Raspberry Pi Compute Modules
CM4 and CM5 IO Boards, Industrial PCs and eMMC
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A Compute Module is a Raspberry Pi processor, RAM and optional eMMC storage on a small board that plugs into a carrier. It suits products and industrial systems where you need a custom shape or ports. Choose RAM, eMMC size and Wi-Fi at purchase, pick an IO board or a ready industrial PC, and flash the eMMC with rpiboot over USB.
Key specs at a glance
- Modules
- CM4 and CM5 in several RAM and eMMC options
- Variants
- With or without Wi-Fi/Bluetooth; Lite versions have no eMMC
- Carriers
- Official IO board, EDATEC CM4 IO and NANO boards
- Industrial PCs
- EDATEC IPC series: CM4 and Pi 5 based, PoE and SSD
- Flashing
- rpiboot with the boot jumper
- Connectors
- Two high-density board-to-board connectors
Why use a Compute Module
A normal Raspberry Pi 4 or 5 is a finished board. A Compute Module is a building block: you add the connectors you need on your own carrier or use an IO board. This makes products smaller, more rugged and easier to mass produce. For hobby projects, a normal Pi is simpler; see Pi models compared.
Choose the variant
Select options by use.
| Option | Choices | Advice |
|---|---|---|
| RAM | 1, 2, 4, 8 GB | 4 GB or more for desktop or heavy apps |
| Storage | Lite (SD on carrier) or 8, 16, 32 GB eMMC | eMMC is faster and more durable than SD |
| Wireless | With or without Wi-Fi and Bluetooth | Choose wireless-less for metal enclosures with external antennas |
| Carrier | IO board, CM4NANO, industrial PC | Ports on a carrier decide what you can connect |
- RAM
- Choices:
- 1, 2, 4, 8 GB
- Advice:
- 4 GB or more for desktop or heavy apps
- Storage
- Choices:
- Lite (SD on carrier) or 8, 16, 32 GB eMMC
- Advice:
- eMMC is faster and more durable than SD
- Wireless
- Choices:
- With or without Wi-Fi and Bluetooth
- Advice:
- Choose wireless-less for metal enclosures with external antennas
- Carrier
- Choices:
- IO board, CM4NANO, industrial PC
- Advice:
- Ports on a carrier decide what you can connect
Carriers and industrial PCs
The CM4 IO computers from EDATEC add a case, ports and storage, and the NANO boards give a compact SBC. Industrial PC models add PoE, SSDs, serial ports and a rugged case for factories; see serial device servers and industrial 4G routers for related gear. Pi 5 based industrial computers offer more speed, including NVMe over PCIe; see Pi NVMe.
Flashing eMMC
1. Set the carrier's boot jumper (nRPIBOOT) and power it with the module installed. 2. Connect the carrier to your computer with a USB cable. 3. Run rpiboot so the eMMC appears as a drive. 4. Write Raspberry Pi OS with Raspberry Pi Imager. 5. Remove the jumper and boot. Lite modules boot from an SD card instead.
Designing your own carrier
If you design a carrier board, follow Raspberry Pi's design guide: the module has two 100-pin connectors and exposes USB, PCIe, HDMI, Ethernet and GPIO. Pay attention to power sequencing, USB layout and thermal design. Add a heatsink or fan if the module will run hot; see cases and cooling.
Try it: Power supply sizing calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Buying a Lite module and forgetting an SD slot on the carrier.
- Choosing too little RAM or eMMC.
- Skipping cooling in a sealed enclosure.
- Powering the carrier with an undersized supply.
- Forgetting to remove the boot jumper after flashing.
Frequently asked questions
Is a Compute Module better than a Pi 4?
Only if you need a custom carrier or industrial form factor.
What is eMMC?
Soldered flash storage, more reliable than an SD card.
Can I swap a CM4 for a CM5?
They share the connector style, but check the carrier supports the CM5's power and pinout.
How do I flash a CM4?
Use rpiboot and Raspberry Pi Imager.
Do I need Wi-Fi?
Only if the design has no Ethernet.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






