Shop by category
Shop all componentsPower, batteries & solar
Motors and servos draw 3–5× their running current at start; size for stall current if they start together.
P rail = Σ (V × I × qty)P in = P main + Σ P other ÷ ηSupply ≥ P in × (1 + headroom)Pi 5 (5 V 3 A) + 4 servos (5 V 0.7 A) + LED strip (12 V 1.5 A) + fan (12 V 0.2 A): 5 V rail 5.8 A = 29 W via a buck from 12 V (33 W in), 12 V rail 20.4 W. Total 53.4 W, +25% = 66.7 W, so a 12 V 75 W SMPS.
A power budget avoids the most common cause of flaky projects: a supply that sags when everything runs at once. List every load with its voltage and maximum current, add them up per rail, and leave headroom for start-up surges and ageing.
The usual pattern is one supply at the highest voltage, with buck converters making the lower rails. Converters lose 10–15%, which this calculator includes. Use a supply with a little margin rather than running a cheap adapter at 100%.
Add up the power of every rail, account for converter efficiency and add 20 to 30 % headroom.
No. A device only draws the current it needs, so a higher-rated supply at the same voltage is safe.
Motors and servos draw high surge current at start-up, and supplies run cooler and last longer below full load.
P rail = Σ (V × I × qty); P in = P main + Σ P other ÷ η; Supply ≥ P in × (1 + headroom).
Pi 5 (5 V 3 A) + 4 servos (5 V 0.7 A) + LED strip (12 V 1.5 A) + fan (12 V 0.2 A): 5 V rail 5.8 A = 29 W via a buck from 12 V (33 W in), 12 V rail 20.4 W. Total 53.4 W, +25% = 66.7 W, so a 12 V 75 W SMPS.
Geekobot builds that use it include Wi-Fi smart switch, Pico W Wi-Fi switch (MicroPython), Touch lamp switch and Wi-Fi dusk light with manual override. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators