Shop by category
Shop all componentsPower, batteries & solar
Daily energy = W × hoursPanel W = Wh ÷ (sun hours × (1 − losses))Battery Ah = Wh × days ÷ (V × depth of discharge)Controller A = panel W ÷ V × 1.25A 10 W device running 24 h needs 240 Wh a day. With 5 sun hours and 25% losses: 240 ÷ 3.75 = 64 W, so a 75 W panel. One day of backup on 12 V lead-acid: 240 ÷ (12 × 0.5) = 40 Ah, and an 8 A or 10 A controller.
Size a solar system from the energy you use each day, not from the panel’s wattage. Peak sun hours convert a location’s sunlight into the equivalent hours of full sun; much of India gets 4 to 6, less during the monsoon.
Allow for losses in wiring, the controller, dust and heat (20–30%). Lead-acid batteries last much longer if you use only half their capacity; LiFePO4 can go to 80% or more. An MPPT controller harvests 10–25% more than PWM, especially in cool weather.
Divide your daily watt-hours by peak sun hours, then allow for losses. A 100 Wh daily load with 5 sun hours and 25 % losses needs about a 27 W panel, so pick 30 W or more.
Most of India gets roughly 4 to 6 peak sun hours a day, lower in the monsoon. Size for your worst month if the system must run all year.
Cloudy days give little charge. Two or three days of storage keeps the load running through bad weather.
Daily energy = W × hours; Panel W = Wh ÷ (sun hours × (1 − losses)); Battery Ah = Wh × days ÷ (V × depth of discharge); Controller A = panel W ÷ V × 1.25.
A 10 W device running 24 h needs 240 Wh a day. With 5 sun hours and 25% losses: 240 ÷ 3.75 = 64 W, so a 75 W panel. One day of backup on 12 V lead-acid: 240 ÷ (12 × 0.5) = 40 Ah, and an 8 A or 10 A controller.
Geekobot builds that use it include Solar pump sunshine switch, Single-axis solar tracker, Solar street light controller and Solar-charged 18650 power bank. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators