LM317 variable power supply
Turn a 12 V adapter into an adjustable 1.25–10 V supply for your experiments.
Shop by category
Shop all componentsA 6 V panel feeds the TP4056 charger through a diode, so the battery cannot leak back into the panel at night. Combine it with the plant waterer or a Wi-Fi sensor for an off-grid build.
Keep the charger and cell shaded; heat shortens lithium cell life.
Tick anything you already have and the total updates.
Follow the colours: red is power, dark grey is ground, blue is a signal.
8 parts: Solar Panel (6V), 18650 Li-ion Rechargeable Cell 2600mAh, 18650 Battery Holder, TP4056 1A Li-ion Charger Module with Protection, MT3608 Mini Boost Converter Module, USB Breakout Board (Type-A female), Diodes (Pack of 10, 1N4007) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Soldering Station. On this page you can tick the parts you already have and add only the rest to your cart.
It is a intermediate project and takes about 1–2 hours. The build on this page has 3 steps.
No. It is a hardware circuit with no microcontroller and no code. Build it on a breadboard from the wiring table and steps on this page.
About ₹648 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.
Solar charging of Li-ion cells; Boost converters.
Keep the charger and cell shaded; heat shortens lithium cell life.
Ideas that reuse this build: Plain USB-charged version and Automatic plant waterer. They are listed under Take it further on this page.
Turn a 12 V adapter into an adjustable 1.25–10 V supply for your experiments.
Build your own USB power bank and learn how lithium charging works.
Beeps when the mains goes off at night, so the fridge and the alarm clock do not quietly die.
Touch the probes to any battery up to 50 V and read its voltage in big digits.
Learning project. Check every circuit and the datasheet of each part before you power it up.