Shop by category
Shop all componentsPower, batteries & solar
V pack = V cell × SCapacity = mAh cell × PEnergy (Wh) = V nominal × AhI max = I cell × P3S2P of 2600 mAh 18650 cells: 3 × 3.7 = 11.1 V (12.6 V full, 9 V empty), 2 × 2600 = 5200 mAh, 11.1 × 5.2 = 57.7 Wh, 6 cells, up to 20 A with 10 A cells.
Cells in series add voltage; cells in parallel add capacity and current. Packs are described as “3S2P”: three groups in series, each group of two cells in parallel. Only ever combine cells of the same type, capacity and state of charge.
Every lithium pack needs a battery management system (BMS) with the right number of series cells, to stop over-charge, over-discharge and short circuits. Charge LiPo packs with a balance charger, and never charge a puffed or damaged cell.
3S gives 11.1 V nominal and 12.6 V full, the usual replacement for 12 V. 4S LiFePO4 gives 12.8 V and is the drop-in for lead-acid.
Three cells in series (to raise the voltage) and two strings in parallel (to double the capacity). With 18650 cells that is 11.1 V nominal.
Yes, for any Li-ion pack with cells in series. A BMS stops over-charge and over-discharge and balances the cells.
V pack = V cell × S; Capacity = mAh cell × P; Energy (Wh) = V nominal × Ah; I max = I cell × P.
3S2P of 2600 mAh 18650 cells: 3 × 3.7 = 11.1 V (12.6 V full, 9 V empty), 2 × 2600 = 5200 mAh, 11.1 × 5.2 = 57.7 Wh, 6 cells, up to 20 A with 10 A cells.
Geekobot builds that use it include DIY 18650 power bank, 18650 charging station with USB output, Bike speedometer and trip meter and Microclimates around the school. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators