LM317 variable power supply
Turn a 12 V adapter into an adjustable 1.25–10 V supply for your experiments.
Shop by category
Shop all componentsThree modules make a power bank. The TP4056 charges the cell at 1 A and stops at 4.2 V, with protection against over-discharge and short circuits. The MT3608 boosts the 3.7 V cell up to 5.1 V for the USB socket. Set the boost voltage with a multimeter before plugging anything in.
Use protected cells or the protected TP4056 version, never short the cell, and do not leave lithium cells charging unattended.
Tick anything you already have and the total updates.
Charges the cell safely to 4.2 V with protection
Follow the colours: red is power, dark grey is ground, blue is a signal.
7 parts: TP4056 1A Li-ion Charger Module with Protection, MT3608 Mini Boost Converter Module, USB Breakout Board (Type-A female), 18650 Battery Holder, 18650 Li-ion Rechargeable Cell 2600mAh, Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Soldering Station. On this page you can tick the parts you already have and add only the rest to your cart.
It is a beginner project and takes about 1 hour. The build on this page has 5 steps.
No. It is a hardware circuit with no microcontroller and no code. Build it on a breadboard from the wiring table and steps on this page.
About ₹498 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.
Li-ion charging (CC/CV); USB power limits.
Use protected cells or the protected TP4056 version, never short the cell, and do not leave lithium cells charging unattended.
Ideas that reuse this build: Solar charging and Battery gauge. They are listed under Take it further on this page.
Turn a 12 V adapter into an adjustable 1.25–10 V supply for your experiments.
Build your own USB power bank and learn how lithium charging works.
Free power for outdoor sensors: sunlight in, 5 V USB out.
Beeps when the mains goes off at night, so the fridge and the alarm clock do not quietly die.
Learning project. Check every circuit and the datasheet of each part before you power it up.