Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Battery gauge

Power & solar projects

Battery gauge with an OLED

A battery icon, the exact voltage and a low-battery light for any 12 V pack.

By Geekobot Learning Team

Beginner
Difficulty
1 hour
Build time
₹467
Parts cost
6
Parts
Arduino
Platform
Add all parts · ₹467Start building
  • Energy & power
  • Measurement & tools
NANO
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

The divider brings the pack voltage into the analog range, the Nano smooths it and converts it to a percentage between EMPTY_V and FULL_V, and the OLED draws a battery bar with the number beside it. The red LED comes on below 15 % so the pack never gets run flat.

What you'll learn

  • Current-limiting resistors for LEDs
  • Drawing text on an I²C display
  • Voltage dividers and ADC scaling
  1. SenseVoltage divider (100 kΩ + 10 kΩ)
  2. ThinkNano reads the pack voltage, converts it to a percentage and draws a battery icon
  3. Act0.96" OLED, Red LED

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    × 1₹185₹185
  • Resistor Assortment Kit (30 Values)
    GB-PASV-0002Guide

    Two resistors scale the battery voltage down by 11 so an analog pin can measure up to about 50 V safely.; 220 Ω series resistor for each LED

    × 1₹33₹33
  • 0.96" OLED Display 128x64 (I2C)
    GB-DISP-0005Guide

    Crisp 128×64 monochrome screen over I²C.

    × 1₹167₹167
  • Through-Hole LED Pack (Pack of 10)
    GB-DISP-0014Guide

    Red indicator LED for the alert state.

    × 1₹15₹15
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

6 of 6 parts in one tap

₹467

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹467

6 of 6 parts. Tick anything you already have.

About ₹14,010 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • I2C Explained
  • MAX30102 Heart Rate and SpO2 Sensor Guide
  • RGB LEDs
  • Arduino Uno

Calculators for this build

  • I²C pull-up resistor calculator
  • UART, I²C and SPI transfer time calculator
  • Display memory and refresh rate calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
Voltage divider (100 kΩ + 10 kΩ)TOP (100 kΩ leg)external
Voltage divider (100 kΩ + 10 kΩ)MIDA0
Voltage divider (100 kΩ + 10 kΩ)LOWGND
0.96" OLEDVCC5V
0.96" OLEDGNDGND
0.96" OLEDSCLA5
0.96" OLEDSDAA4
Red LEDANODED2
Red LEDCATHODEGND
  • Voltage divider (100 kΩ + 10 kΩ)TOP (100 kΩ leg) → external
  • Voltage divider (100 kΩ + 10 kΩ)MID → A0
  • Voltage divider (100 kΩ + 10 kΩ)LOW → GND
  • 0.96" OLEDVCC → 5V
  • 0.96" OLEDGND → GND
  • 0.96" OLEDSCL → A5
  • 0.96" OLEDSDA → A4
  • Red LEDANODE → D2
  • Red LEDCATHODE → GND
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 9 done

Code

battery_monitor_oled.inoVerify & upload in Electrolark
// Battery gauge with an OLED
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "battery-monitor-oled"

#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

// ---- pins ----
const uint8_t VBAT_PIN = A0;
const uint8_t LED_RED = 2;

const int ADC_MAX = 1023;      // 10-bit analog input
const float VREF = 5.0f;

Adafruit_SSD1306 oled(128, 64, &Wire, -1);

// ---- latest readings ----
float batteryV = 0;

const float FULL_V = 12.6, EMPTY_V = 10.5;     // 3S lithium pack; use 14.4 / 11.8 for a 12 V lead-acid battery
unsigned long lastShow = 0;
float vSmooth = 0;

float readBatteryV() { return analogRead(VBAT_PIN) * VREF / ADC_MAX * 11.0f; }   // 100 kΩ : 10 kΩ divider = ÷11

void setRedLed(bool on) { digitalWrite(LED_RED, on ? HIGH : LOW); }

void setup() {
  Serial.begin(115200);
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) Serial.println(F("OLED not found"));
  oled.setTextColor(SSD1306_WHITE);
  oled.clearDisplay();
  oled.display();
  pinMode(LED_RED, OUTPUT);
}

void loop() {
  float v = readBatteryV();
  vSmooth = vSmooth == 0 ? v : vSmooth * 0.9f + v * 0.1f;
  int pct = constrain((int)((vSmooth - EMPTY_V) / (FULL_V - EMPTY_V) * 100), 0, 100);
  if (millis() - lastShow > 500) {
    lastShow = millis();
    oled.clearDisplay(); oled.setTextSize(1); oled.setCursor(0, 0); oled.print(F("Battery"));
    oled.setTextSize(2); oled.setCursor(0, 14); oled.print(vSmooth, 2); oled.print(F(" V"));
    oled.drawRect(0, 40, 100, 14, SSD1306_WHITE); oled.fillRect(2, 42, pct * 96 / 100, 10, SSD1306_WHITE); oled.drawRect(100, 44, 4, 6, SSD1306_WHITE);
    oled.setCursor(108, 44); oled.print(pct); oled.print('%');
    oled.display();
    setRedLed(pct < 15);
    Serial.print(vSmooth, 2); Serial.print(F(" V  ")); Serial.print(pct); Serial.println('%');
  }
  delay(50);
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

Reading is off by a few percent+

Measure the real resistor values and change 11.0 to (R1 + R2) / R2.

Screen stays blank+

Check SDA/SCL and try address 0x3D. Run an I²C scanner to confirm.

LED never lights+

LED is reversed; flip it. Check the 220 Ω resistor is in series.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider. Analog readings run 0–4095 instead of 0–1023, which the ADC_MAX constant handles.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the battery gauge with an OLED?+

6 parts: Nano CH340 Development Board (Soldered), Resistor Assortment Kit (30 Values), 0.96" OLED Display 128x64 (I2C), Through-Hole LED Pack (Pack of 10), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a beginner project and takes about 1 hour. The build on this page has 9 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (battery_monitor_oled.ino). Install these libraries first: Adafruit SSD1306 and Adafruit GFX Library.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the battery gauge with an OLED cost to build?+

About ₹467 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Current-limiting resistors for LEDs; Drawing text on an I²C display; Voltage dividers and ADC scaling.

What can I build next with these parts?+

Ideas that reuse this build: Ring gauge and 7-segment tester. They are listed under Take it further on this page.

Take it further

  • Ring gauge
  • 7-segment tester

Related projects

  • Power & solar
    Intermediate· 1–2 hours

    LM317 variable power supply

    Turn a 12 V adapter into an adjustable 1.25–10 V supply for your experiments.

    ₹422 · 10 partsNo code
  • 1865018650
    Power & solar
    Beginner· 1 hour

    DIY 18650 power bank

    Build your own USB power bank and learn how lithium charging works.

    ₹480 · 6 partsNo code
  • 1865018650
    Power & solar
    Intermediate· 1–2 hours

    Solar-charged 18650 power bank

    Free power for outdoor sensors: sunlight in, 5 V USB out.

    ₹648 · 8 partsNo code
  • NANO18650
    Power & solar
    Intermediate· 1–2 hours

    Power-cut alarm with battery backup

    Beeps when the mains goes off at night, so the fridge and the alarm clock do not quietly die.

    ₹559 · 10 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
Battery
16 .5 1 V
10
Red LED (D2) OFF
Serial monitor115200 baud
16.48 V  100%
16.51 V  100%
16.50 V  100%
16.51 V  100%
16.51 V  100%

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build