Shop by category
Shop all componentsSensors & MCUs
Frame rate is the SPI limit only. Real libraries are slower. Many displays can be drawn without a full buffer, sending rows or tiles as you draw.
Bytes = width × height × bits per pixel ÷ 8Time per frame = bytes × 8 ÷ SPI clockA 240×320 RGB565 TFT needs 240 × 320 × 2 = 153,600 bytes (150 KB). At 40 MHz SPI one full refresh takes 30.7 ms, so at most 32.6 fps. It fits a Raspberry Pi Pico and an ESP32 but not an Arduino Uno.
A display with a full frame buffer needs enough RAM to hold every pixel. Small monochrome OLEDs need only 1 KB, but a colour TFT needs hundreds of kilobytes, which is why a plain Arduino Uno cannot hold a full colour image.
Libraries get around this by drawing directly to the screen or in tiles. The SPI speed then limits how many full-screen updates per second are possible, so animation on large colour screens works best on faster boards such as the ESP32.
128 × 64 × 1 bit ÷ 8 = 1024 bytes, half of an Arduino Uno's 2 KB RAM.
Yes, but not with a full framebuffer. A 240×320 16-bit screen needs 150 KB, so libraries draw directly to the display.
The bus clock. SPI at 40 MHz moves far more data per second than I²C at 400 kHz.
Bytes = width × height × bits per pixel ÷ 8; Time per frame = bytes × 8 ÷ SPI clock.
A 240×320 RGB565 TFT needs 240 × 320 × 2 = 153,600 bytes (150 KB). At 40 MHz SPI one full refresh takes 30.7 ms, so at most 32.6 fps. It fits a Raspberry Pi Pico and an ESP32 but not an Arduino Uno.
Geekobot builds that use it include Laser distance meter, Non-contact IR thermometer, Handheld soil moisture meter and Sound level meter. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators