Shop by category
Shop all componentsPower, batteries & solar
Usable energy = V × Ah × depth × ηBackup time = usable energy ÷ loadBattery current = load ÷ (V × η)A 12 V, 150 Ah lead-acid battery (50% usable) with an 85% efficient inverter powering 300 W: 12 × 150 × 0.5 × 0.85 = 765 Wh, so 2.5 hours. A 4 hour backup needs about 235 Ah.
Backup time depends on the battery’s usable energy, the inverter’s losses and your load. Only part of a lead-acid battery’s capacity should be used if you want it to last for years, and the faster you discharge it, the less you get out (the Peukert effect).
Add up only the loads that must keep running, such as lights, a router and a few fans. Heaters, irons and motors with high starting current need a much larger inverter and bank.
At 12 V, 150 Ah, 80 % usable and 85 % efficiency there is about 1.2 kWh, so a 300 W load runs about 4 hours.
Ah = load W × hours ÷ (battery V × depth of discharge × efficiency).
Deep discharges shorten its life. Keep tubular and flat-plate batteries above about 50 % for long service.
Usable energy = V × Ah × depth × η; Backup time = usable energy ÷ load; Battery current = load ÷ (V × η).
A 12 V, 150 Ah lead-acid battery (50% usable) with an 85% efficient inverter powering 300 W: 12 × 150 × 0.5 × 0.85 = 765 Wh, so 2.5 hours. A 4 hour backup needs about 235 Ah.
Geekobot builds that use it include DIY 18650 power bank, 18650 charging station with USB output, Bike speedometer and trip meter and Microclimates around the school. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators