Component guide · Advanced · 4 min read
Industrial Vibration Accelerometers

Amphenol Wilcoxon 780B and HV200, TE 830M1 Piezoelectric, BWSENSING AS100
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These sensors measure machine vibration for condition monitoring. The Amphenol Wilcoxon 780B and HV200 are sealed sensors with 100 mV/g output for pumps and motors. The TE 830M1 series are board-mount piezoelectric accelerometers from ±25 to ±1000 g with an analog output. The BWSENSING AS100 is a precise MEMS accelerometer with RS485 output. Most need a proper supply and signal conditioning.
Key specs at a glance
- Sensitivity
- 100 mV/g (780B, HV200), 1.25 to 50 mV/g (830M1)
- Range
- ±80 g (Wilcoxon), ±25 to ±1000 g (830M1), ±10 g (AS100)
- Supply
- 18 to 30 V DC (Wilcoxon), 3.3 to 5.5 V (830M1), RS485 supply (AS100)
- Output
- Analog AC around a DC bias, or RS485
- Mounting
- Stud (1/4-28) or PCB
- Use
- Pumps, motors, fans, gearboxes
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Amphenol Wilcoxon 780B Accelerometer Sensor, 0.1 V/g, ±80 g Range, 30 VDC, -50°C to 120°C, 1/4-28 UNF Thread₹26,389
Option 2Amphenol Wilcoxon HV200 High EMI Resistance Accelerometer Sensor, 100 mV/g, ±80 g, Analog, 18-30 VDC₹68,939
Option 3TE Connectivity 830M1-0025 Piezoelectric Accelerometer Sensor, ±25 g, 50 mV/g, 3 Axes, LCC-12 Package₹24,829
Option 4TE Connectivity 830M1-0050 Piezoelectric Accelerometer, ±50 g, 25 mV/g, 3 Axes, 3.3-5.5V, LCC-12₹17,759
Option 5TE Connectivity 830M1-0100 Piezoelectric Accelerometer Sensor, ±100 g, 12.5 mV/g, 3 Axes, 3.3-5.5V, LCC-12₹24,829
Option 6TE Connectivity 830M1-0500 Piezoelectric Accelerometer Sensor, ±500 g, 2.5 mV/g, 3 Axes, LCC-12₹24,849
What the Industrial vibration accelerometers is
Industrial vibration accelerometers are IEPE or 4 to 20 mA sensors mounted on motors, pumps and fans to measure vibration for condition monitoring.
Sensor-powered accelerometers like the Wilcoxon types sit on a DC bias; the vibration is the AC part on top. Remove the bias with a capacitor or in software and compute RMS.
The TE 830M1 are 3-axis piezo parts with a built-in amplifier for PCB use; they do not measure static tilt, only vibration.
Industrial vibration accelerometers pinout
The pins on the Industrial vibration accelerometers and what each one does.
| Pin | Function |
|---|---|
| Signal / power | Supply and output (2-wire IEPE style) |
| Common | Return |
| VDD / X / Y / Z / GND | 830M1 PCB pins |
| A / B | RS485 (AS100) |
- Signal / power
- Supply and output (2-wire IEPE style)
- Common
- Return
- VDD / X / Y / Z / GND
- 830M1 PCB pins
- A / B
- RS485 (AS100)
Wiring the Industrial vibration accelerometers
Never connect an 18 to 30 V sensor output straight to a microcontroller pin. Use a signal conditioner, or the RS485 AS100.
| Industrial vibration accelerometers pin | Arduino Uno | ESP32 |
|---|---|---|
| Supply + | Constant-current or rated DC supply | Constant-current or rated DC supply |
| Signal | A0 through a coupling and bias circuit | GPIO 34 through a coupling and bias circuit |
| Common | GND | GND |
- Supply +
- Arduino Uno:
- Constant-current or rated DC supply
- ESP32:
- Constant-current or rated DC supply
- Signal
- Arduino Uno:
- A0 through a coupling and bias circuit
- ESP32:
- GPIO 34 through a coupling and bias circuit
- Common
- Arduino Uno:
- GND
- ESP32:
- GND
Example code
An Uno samples too slowly for high-frequency faults; use a dedicated data acquisition card for real monitoring.
const int PIN = A0;
const int N = 500;
const float MV_PER_COUNT = 4.88; // Uno 5 V / 1024
const float MV_PER_G = 100; // sensor sensitivity
void setup() { Serial.begin(115200); }
void loop() {
long sum = 0; int s[N];
for (int i = 0; i < N; i++) { s[i] = analogRead(PIN); sum += s[i]; }
float mean = sum / (float)N, acc = 0;
for (int i = 0; i < N; i++) { float d = s[i] - mean; acc += d * d; }
float rms_g = sqrt(acc / N) * MV_PER_COUNT / MV_PER_G;
Serial.print("Vibration RMS: "); Serial.print(rms_g, 3); Serial.println(" g");
delay(500);
}Setup and tuning
IEPE sensors need a constant-current supply; 4 to 20 mA types connect to PLC inputs.
use a stud mount on a flat, clean surface for best frequency response.
use shielded cable grounded at one end.
for IEPE, use a DAQ that supplies current and samples fast enough for your frequency range.
set levels from ISO 10816 or your own baseline.
What you need
Shop this list12 of 12 found in our store · ₹2,56,896
Amphenol Wilcoxon 780B Accelerometer Sensor, 0.1 V/g, ±80 g Range, 30 VDC, -50°C to 120°C, 1/4-28 UNF Thread: the part this guide coversAmphenol Wilcoxon 780B Accelerometer Sensor, 0.1 V/g, ±80 g Range, 30 VDC, -50°C to 120°C, 1/4-28 UNF Thread₹26,389
Amphenol Wilcoxon HV200 High EMI Resistance Accelerometer Sensor, 100 mV/g, ±80 g, Analog, 18-30 VDC: another version this guide coversAmphenol Wilcoxon HV200 High EMI Resistance Accelerometer Sensor, 100 mV/g, ±80 g, Analog, 18-30 VDC₹68,939
TE Connectivity 830M1-0025 Piezoelectric Accelerometer Sensor, ±25 g, 50 mV/g, 3 Axes, LCC-12 Package: another version this guide coversTE Connectivity 830M1-0025 Piezoelectric Accelerometer Sensor, ±25 g, 50 mV/g, 3 Axes, LCC-12 Package₹24,829
TE Connectivity 830M1-0050 Piezoelectric Accelerometer, ±50 g, 25 mV/g, 3 Axes, 3.3-5.5V, LCC-12: another version this guide coversTE Connectivity 830M1-0050 Piezoelectric Accelerometer, ±50 g, 25 mV/g, 3 Axes, 3.3-5.5V, LCC-12₹17,759
TE Connectivity 830M1-0100 Piezoelectric Accelerometer Sensor, ±100 g, 12.5 mV/g, 3 Axes, 3.3-5.5V, LCC-12: another version this guide coversTE Connectivity 830M1-0100 Piezoelectric Accelerometer Sensor, ±100 g, 12.5 mV/g, 3 Axes, 3.3-5.5V, LCC-12₹24,829
TE Connectivity 830M1-0500 Piezoelectric Accelerometer Sensor, ±500 g, 2.5 mV/g, 3 Axes, LCC-12: another version this guide coversTE Connectivity 830M1-0500 Piezoelectric Accelerometer Sensor, ±500 g, 2.5 mV/g, 3 Axes, LCC-12₹24,849
TE Connectivity 830M1-1000 Piezoelectric Accelerometer Sensor, ±1000 g, 1.25 mV/g, 3 Axes, LCC-12 Package: another version this guide coversTE Connectivity 830M1-1000 Piezoelectric Accelerometer Sensor, ±1000 g, 1.25 mV/g, 3 Axes, LCC-12 Package₹26,629
BWSENSING AS100-5 MEMS Accelerometer, High Precision 3-Axis ±10g Sensor, RS485: another version this guide coversBWSENSING AS100-5 MEMS Accelerometer, High Precision 3-Axis ±10g Sensor, RS485₹42,097
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
MAX485 RS-485 to TTL module: to read RS485 versions from a microcontrollerMAX485 RS-485 to TTL Module₹28
USB to RS485 converter adapter: to test RS485 versions from a PCUSB to RS485 Converter Adapter₹74
SMPS power supply in metal enclosure (5/12/24 V): a 12 V or 24 V supplySMPS Power Supply, Metal Enclosure (5V / 12V / 24V)₹298Closest match, check the specs
Alternatives and when to choose them
- IIS3DWB: digital MEMS vibration sensor.
- ADXL1002: analog MEMS option.
- Piezo sensors: simple knock detection.
Common mistakes to avoid
- Using magnetic mounts for high-frequency work.
- Grounding the shield at both ends.
- Reading IEPE without a current supply.
- No baseline.
Frequently asked questions
What is an IEPE accelerometer?
A sensor with a built-in amplifier, powered by constant current on the signal wire.
Can I read IEPE sensors with Arduino?
Not directly; use an IEPE conditioner or DAQ.
What does a 4 to 20 mA vibration sensor output?
Usually overall vibration velocity, such as mm/s RMS.
How should I mount the sensor?
Stud mounting on a flat spot near the bearing.
What vibration level is bad?
Check ISO 10816 limits for your machine class.
Parts for this guide
Amphenol Wilcoxon 780B Accelerometer Sensor, 0.1 V/g, ±80 g Range, 30 VDC, -50°C to 120°C, 1/4-28 UNF Thread₹26,389View
Amphenol Wilcoxon HV200 High EMI Resistance Accelerometer Sensor, 100 mV/g, ±80 g, Analog, 18-30 VDC₹68,939View
TE Connectivity 830M1-0025 Piezoelectric Accelerometer Sensor, ±25 g, 50 mV/g, 3 Axes, LCC-12 Package₹24,829View- ₹17,759View
TE Connectivity 830M1-0100 Piezoelectric Accelerometer Sensor, ±100 g, 12.5 mV/g, 3 Axes, 3.3-5.5V, LCC-12₹24,829View- ₹24,849View
TE Connectivity 830M1-1000 Piezoelectric Accelerometer Sensor, ±1000 g, 1.25 mV/g, 3 Axes, LCC-12 Package₹26,629View- ₹42,097View
- ₹177View
- ₹28View
- ₹74View
- ₹298View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
