Component guide · Intermediate · 4 min read
IR Thermopile and Non-Contact Temperature Sensors

Melexis MLX90632 Medical Grade Modules, Omron D6T-1A and D6T-44L, Amphenol ZTP-135, Senba ISB-TS45D, Asair AIT1000, Grove Digital IR Temperature Sensor and 4-20mA IR Transmitters
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A thermopile measures the infrared heat an object gives off, so it reads temperature without touching it. Digital modules like the MLX90632, Omron D6T and AIT1000 do the maths and give degrees over I2C. Bare thermopiles such as the ZTP-135 and Senba TS45D output tiny millivolts and need an amplifier and a reference thermistor. The Omron D6T-44L is a 4x4 array that can spot a still person, which a PIR cannot.
Key specs at a glance
- Range
- About -40 to 300°C by model
- Accuracy
- ±0.2°C (MLX90632 medical range) to ±2°C
- Interface
- I2C (MLX90632, D6T, AIT1000), analog mV (bare thermopiles), 4-20mA (industrial)
- Field of view
- Narrow 50° to wide 90°
- Supply
- 3.3V to 5V; 24V for transmitters
- Array
- D6T-44L 4x4 pixels
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Amphenol Advanced Sensors ZTP-135L Thermopile IR Sensor, TO-46 Package₹419
Option 2Amphenol Advanced Sensors ZTP-135SR Thermopile IR Sensor, TO-46 Package₹479
Option 3Asair AIT1000 Non-Contact Infrared Temperature Sensor Module – I2C & PWM Output₹569
Option 4FirstRate FST600-400A Non-Contact Infrared Temperature Sensor, Range 0~300℃, 4-20mA Output, IP65, w/ 1.5m Cable₹9,969
Option 5Omron D6T-1A-01 IR Sensor, 5 To 50°C, 5.5VDC₹1,209
Option 6Omron D6T-1A-02 IR Sensor -40 to 80°C, 5.5VDC₹2,299
What the IR thermopile and non-contact temperature sensors: MLX90632, Omron D6T, ZTP-135, AIT1000 and industrial IR transmitters is
IR thermopile temperature sensors such as the MLX90614, MLX90632 and TMP007 measure the temperature of an object without contact by reading its infrared radiation.
Every IR sensor sees a cone, not a point. The further away the object, the bigger the spot it averages, so a small hot part far away reads low. Keep the object filling the field of view, or move closer.
Shiny metal reflects heat and reads far too low; a piece of matt black tape on it fixes that. For body temperature, the MLX90632 medical-grade parts are the right choice. For people counting or presence, the D6T-44L array works even when the person sits still.
IR thermopile and non-contact temperature sensors: MLX90632, Omron D6T, ZTP-135, AIT1000 and industrial IR transmitters pinout
The pins on the IR thermopile and non-contact temperature sensors: MLX90632, Omron D6T, ZTP-135, AIT1000 and industrial IR transmitters and what each one does.
| Pin | Function |
|---|---|
| VDD | 3.3V (MLX90632, D6T) or 5V module |
| GND | Ground |
| SDA | I2C data |
| SCL | I2C clock |
| Thermopile + / - and NTC | Bare sensors: signal and reference thermistor |
- VDD
- 3.3V (MLX90632, D6T) or 5V module
- GND
- Ground
- SDA
- I2C data
- SCL
- I2C clock
- Thermopile + / - and NTC
- Bare sensors: signal and reference thermistor
Wiring the IR thermopile and non-contact temperature sensors: MLX90632, Omron D6T, ZTP-135, AIT1000 and industrial IR transmitters
Bare thermopiles give microvolts; use an op-amp or ADS1115 and read the built-in NTC for the cold-junction reference.
| IR thermopile and non-contact temperature sensors: MLX90632, Omron D6T, ZTP-135, AIT1000 and industrial IR transmitters pin | Arduino / ESP32 | Note |
|---|---|---|
| VDD | 3.3V | D6T accepts 4.5-5.5V; check model |
| GND | GND | |
| SDA | A4 or ESP32 GPIO21 | Pull-ups on most modules |
| SCL | A5 or ESP32 GPIO22 |
- VDD
- Arduino / ESP32:
- 3.3V
- Note:
- D6T accepts 4.5-5.5V; check model
- GND
- Arduino / ESP32:
- GND
- SDA
- Arduino / ESP32:
- A4 or ESP32 GPIO21
- Note:
- Pull-ups on most modules
- SCL
- Arduino / ESP32:
- A5 or ESP32 GPIO22
Example code
The Omron D6T uses its own I2C frame with a checksum; use an Omron D6T library or the example in the datasheet.
#include <Wire.h>
#include <SparkFun_MLX90632_Arduino_Library.h>
MLX90632 ir;
void setup() {
Serial.begin(115200);
Wire.begin();
MLX90632::status st;
if (!ir.begin(0x3A, Wire, st)) Serial.println("MLX90632 not found");
}
void loop() {
float obj = ir.getObjectTemp();
float amb = ir.getSensorTemp();
Serial.print("Object: "); Serial.print(obj);
Serial.print(" C Sensor: "); Serial.println(amb);
delay(500);
}Setup and tuning
connect over I2C (SDA, SCL) with 3.3 or 5 V as rated.
use the Adafruit or SparkFun MLX90614 library.
the sensor averages everything in its view cone; get close so the target fills it.
set emissivity for the material; shiny metals read low.
medical-grade versions (MLX90632) are needed for body readings.
What you need
Shop this list12 of 12 found in our store · ₹28,273
Amphenol Advanced Sensors ZTP-135L Thermopile IR Sensor, TO-46 Package: the part this guide coversAmphenol Advanced Sensors ZTP-135L Thermopile IR Sensor, TO-46 Package₹419
Amphenol Advanced Sensors ZTP-135SR Thermopile IR Sensor, TO-46 Package: another version this guide coversAmphenol Advanced Sensors ZTP-135SR Thermopile IR Sensor, TO-46 Package₹479
Asair AIT1000 Non-Contact Infrared Temperature Sensor Module – I2C & PWM Output: another version this guide coversAsair AIT1000 Non-Contact Infrared Temperature Sensor Module – I2C & PWM Output₹569
FirstRate FST600-400A Non-Contact Infrared Temperature Sensor, Range 0~300℃, 4-20mA Output, IP65, w/ 1.5m Cable: another version this guide coversFirstRate FST600-400A Non-Contact Infrared Temperature Sensor, Range 0~300℃, 4-20mA Output, IP65, w/ 1.5m Cable₹9,969
Omron D6T-1A-01 IR Sensor, 5 To 50°C, 5.5VDC: another version this guide coversOmron D6T-1A-01 IR Sensor, 5 To 50°C, 5.5VDC₹1,209
Omron D6T-1A-02 IR Sensor -40 to 80°C, 5.5VDC: another version this guide coversOmron D6T-1A-02 IR Sensor -40 to 80°C, 5.5VDC₹2,299
Omron D6T-44L-06H Thermal IR Sensor, 5-200°C Detection Range, I2C Interface: another version this guide coversOmron D6T-44L-06H Thermal IR Sensor, 5-200°C Detection Range, I2C Interface₹5,059
Seeed Studio Studio Grove Digital Infrared Temperature Sensor Module with JST Cable: another version this guide coversSeeed Studio Grove Digital Infrared Temperature Sensor Module with JST Cable₹2,579Closest match, check the specs
Senba ISB-TS45D Infrared Thermopile Sensor for Non-Contact Temperature Detection – TO-46 Metal Package: another version this guide coversSenba ISB-TS45D Infrared Thermopile Sensor for Non-Contact Temperature Detection – TO-46 Metal Package₹179
TE Connectivity Thermopile Sensor, Infrared, TO-18, CO2 Gas Detection: another version this guide coversTE Connectivity Thermopile Sensor, Infrared, TO-18, CO2 Gas Detection₹1,604
UByte MLX90632SLD-DCB-000-RE Medical Grade Non-Contact IR Thermometer Module: another version this guide coversUByte MLX90632SLD-DCB-000-RE Medical Grade Non-Contact IR Thermometer Module₹1,199
Adafruit MLX90632 FIR Remote Thermal Temperature Sensor – Medical Grade STEMMA QT / Qwiic: another version this guide coversAdafruit MLX90632 FIR Remote Thermal Temperature Sensor – Medical Grade STEMMA QT / Qwiic₹2,709
Alternatives and when to choose them
- MLX90614 IR thermometer: the common single-point sensor.
- Thermal imaging modules: AMG8833 and MLX90640 arrays.
- ADS1115 ADC: read bare thermopile signals.
Common mistakes to avoid
- Measuring a small target from far away.
- Pointing it at shiny metal.
- Measuring through glass.
- Using it as a medical thermometer.
Frequently asked questions
Why does my MLX90614 read lower than expected?
The target does not fill the field of view, or it is shiny.
What is emissivity?
How well a surface emits IR; skin is about 0.98, polished metal far lower.
Can it measure body temperature?
Only roughly; use a medical-grade sensor for health use.
Can it see through glass?
No. Glass blocks long-wave IR.
What is the measuring range?
The MLX90614 reads about -70 to 380 °C.
Parts for this guide
- ₹419View
- ₹479View
- ₹569View
FirstRate FST600-400A Non-Contact Infrared Temperature Sensor, Range 0~300℃, 4-20mA Output, IP65, w/ 1.5m Cable₹9,969View- ₹1,209View
- ₹2,299View
- ₹5,059View
- ₹2,579View
Senba ISB-TS45D Infrared Thermopile Sensor for Non-Contact Temperature Detection – TO-46 Metal Package₹179View- ₹1,604View
- ₹1,199View
- ₹2,709View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
