Component guide · Intermediate · 5 min read
Larger OLED Displays

1.12 to 3.12 Inch SSD1309, SH1106, SH1107, CH1116 and SSD1351 Panels, Transparent OLEDs, RGB OLEDs and Adafruit, DFRobot and Waveshare Modules
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Larger OLED panels run from 1.1 to 3.12 inch and use chips such as SSD1309, SH1106, SH1107, CH1116 or SSD1351 (colour). The chip decides the library: SSD1309 and SH1106 work with U8g2, and SSD1351 colour panels work with Adafruit SSD1351. Some are transparent. Check interface (I2C, SPI) and logic voltage.
Key specs at a glance
- Sizes
- 1.12 to 3.12 inch
- Chips
- SSD1309, SH1106, SH1107, CH1116, SSD1351
- Interface
- I2C, SPI or both by model
- Colours
- White, blue, yellow, RGB
- Resolution
- 128x64 up to 256x64 and 128x128 RGB
- Special
- Transparent OLED, encoder module
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 12.42 inch OLED Display 128 x 64 (SSD1309, I2C/SPI)₹1,392
Option 21.5 inch RGB OLED Display 128 x 128 (SSD1351)₹945
Option 3GoldenMorning Transparent SSD1309 24P SPI I2C 128X56 1.51 inch OLED Display₹1,421
Option 4Adafruit Monochrome 1.12" 128x128 OLED Graphic Display - STEMMA QT / Qwiic₹2,914
Option 5DFRobot Fermion: 1.51” OLED Transparent Display with Converter (Breakout)₹4,138
Option 61.3 Inch Monochrome Oled display panel(White)₹426
What the Larger OLED panels (SSD1309, SH1106, CH1116, SH1107, SSD1351 and RGB) is
Bigger OLEDs give more room for text and graphics than the 0.96 inch type. SH1106 is the common 1.3 inch controller and differs slightly from SSD1306 (it has a 132-column memory), so a wrong library shows a shifted image. SSD1309 powers 2.42 inch and 2.7 inch panels and the transparent 1.51 inch OLED. The 2.23, 2.42 and 3.12 inch panels have a flexible cable or header with SPI, and the 3.12 inch is 256x64.
Colour SSD1351 panels (1.27 and 1.5 inch) show 262K colours over SPI. Adafruit and DFRobot modules add Qwiic or breakout headers for easy wiring.
Larger OLED panels (SSD1309, SH1106, CH1116, SH1107, SSD1351 and RGB) pinout
The pins on the Larger OLED panels (SSD1309, SH1106, CH1116, SH1107, SSD1351 and RGB) and what each one does.
| Pin | Function |
|---|---|
| VCC | Power (3.3 V or 5 V by module) |
| GND | Ground |
| SDA / MOSI | Data in |
| SCL / SCK | Clock |
| DC / CS / RES | SPI control pins on SPI modules |
- VCC
- Power (3.3 V or 5 V by module)
- GND
- Ground
- SDA / MOSI
- Data in
- SCL / SCK
- Clock
- DC / CS / RES
- SPI control pins on SPI modules
Wiring the Larger OLED panels (SSD1309, SH1106, CH1116, SH1107, SSD1351 and RGB)
For I2C modules use SDA and SCL as on the small OLEDs; this table is for SPI modules.
| Larger OLED panels (SSD1309, SH1106, CH1116, SH1107, SSD1351 and RGB) pin | Arduino Uno (SPI) | ESP32 |
|---|---|---|
| VCC | 3.3V (5V only if the module has a regulator) | 3V3 |
| GND | GND | GND |
| SCL / SCK | D13 | GPIO 18 |
| SDA / MOSI | D11 | GPIO 23 |
| RES / RST | D8 | GPIO 4 |
| DC | D9 | GPIO 2 |
| CS | D10 | GPIO 5 |
| BL / LED | 3.3V (or a PWM pin to dim) | 3V3 or GPIO 15 |
- VCC
- Arduino Uno (SPI):
- 3.3V (5V only if the module has a regulator)
- ESP32:
- 3V3
- GND
- Arduino Uno (SPI):
- GND
- ESP32:
- GND
- SCL / SCK
- Arduino Uno (SPI):
- D13
- ESP32:
- GPIO 18
- SDA / MOSI
- Arduino Uno (SPI):
- D11
- ESP32:
- GPIO 23
- RES / RST
- Arduino Uno (SPI):
- D8
- ESP32:
- GPIO 4
- DC
- Arduino Uno (SPI):
- D9
- ESP32:
- GPIO 2
- CS
- Arduino Uno (SPI):
- D10
- ESP32:
- GPIO 5
- BL / LED
- Arduino Uno (SPI):
- 3.3V (or a PWM pin to dim)
- ESP32:
- 3V3 or GPIO 15
Example code
U8g2 supports SSD1306, SH1106, SSD1309 and many more; pick the constructor that matches your chip.
#include <U8g2lib.h>
#include <Wire.h>
// choose the constructor for your chip: SH1106, SSD1309, SSD1306
U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, U8X8_PIN_NONE);
void setup() {
u8g2.begin();
}
void loop() {
u8g2.clearBuffer();
u8g2.setFont(u8g2_font_ncenB10_tr);
u8g2.drawStr(0, 20, "Hello Geekobot");
u8g2.sendBuffer();
delay(1000);
}Setup and tuning
read the controller in the title and pick the matching U8g2 constructor.
if the image is shifted by 2 pixels, you are using an SSD1306 driver on an SH1106.
many panels need resistor links set for the interface; check the module notes.
transparent OLEDs are fragile; mount without pressing on the glass.
What you need
Shop this list20 of 20 found in our store · ₹28,648
2.42 inch OLED Display 128 x 64 (SSD1309, I2C/SPI): the part this guide covers2.42 inch OLED Display 128 x 64 (SSD1309, I2C/SPI)₹1,392
1.5 inch RGB OLED Display 128 x 128 (SSD1351): another version this guide covers1.5 inch RGB OLED Display 128 x 128 (SSD1351)₹945
GoldenMorning Transparent SSD1309 24P SPI I2C 128X56 1.51 inch OLED Display: another version this guide coversGoldenMorning Transparent SSD1309 24P SPI I2C 128X56 1.51 inch OLED Display₹1,421
Adafruit Monochrome 1.12" 128x128 OLED Graphic Display - STEMMA QT / Qwiic: another version this guide coversAdafruit Monochrome 1.12" 128x128 OLED Graphic Display - STEMMA QT / Qwiic₹2,914
DFRobot Fermion: 1.51” OLED Transparent Display with Converter (Breakout): another version this guide coversDFRobot Fermion: 1.51” OLED Transparent Display with Converter (Breakout)₹4,138
1.3 Inch Monochrome Oled display panel(White): another version this guide covers1.3 Inch Monochrome Oled display panel(White)₹426
1.3 Inch Monochrome Oled Display Panel (Blue): another version this guide covers1.3 Inch Monochrome Oled Display Panel (Blue)₹347
Waveshare 1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface: another version this guide coversWaveshare 1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface₹1,869
2.23 Inch Monochrome Oled display module (White): another version this guide covers2.23 Inch Monochrome Oled display module (White)₹1,113
2.23 Inch Monochrome Oled Display Module (Yellow): another version this guide covers2.23 Inch Monochrome Oled Display Module (Yellow)₹1,610
2.23 Inch Monochrome Oled display panel(White): another version this guide covers2.23 Inch Monochrome Oled display panel(White)₹635
GoldenMorning 2.42 Inch Monochrome Oled display panel(White): another version this guide coversGoldenMorning 2.42 Inch Monochrome Oled display panel(White)₹1,491
GoldenMorning OLED display SH1107 13P 64X128 SPI 1.3 inch OLED display: another version this guide coversGoldenMorning OLED display SH1107 13P 64X128 SPI 1.3 inch OLED display₹377
GoldenMorning GME25664-50 3.12 Inch Monochrome Oled display module (White): another version this guide coversGoldenMorning GME25664-50 3.12 Inch Monochrome Oled display module (White)₹4,178
HW-787AB 1.3" OLED Display with EC11 Rotary Encoder I2C Module: another version this guide coversHW-787AB 1.3" OLED Display with EC11 Rotary Encoder I2C Module₹655
Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic: another version this guide coversAdafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic₹2,297
GoldenMorning OLED Display SSD1315 30P 128X64 SPI,I2C 1.29 Inch OLED Display: another version this guide coversGoldenMorning OLED Display SSD1315 30P 128X64 SPI,I2C 1.29 Inch OLED Display₹377
2.42 inch SPI communication 128x64 resolution ssd1309 driver oled display module - Blue color screen: another version this guide covers2.42 inch SPI communication 128x64 resolution ssd1309 driver oled display module - Blue color screen₹1,153
2.23 Inch Monochrome OLED display panel (BLUE): another version this guide covers2.23 Inch Monochrome OLED display panel (BLUE)₹904
1.3 inch 128x64 SSD1106 Controller I2C Serial Communication OLED Display - White Color Screen: another version this guide covers1.3 inch 128x64 SSD1106 Controller I2C Serial Communication OLED Display - White Color Screen₹406
Alternatives and when to choose them
- Small I2C OLEDs: 0.96 inch and smaller.
- SSD1306 OLED displays: the common baseline.
- Graphic LCD 12864: cheap non-OLED graphics.
Common mistakes to avoid
- Using an SSD1306 driver on an SH1106 panel.
- Not setting the interface links on SPI/I2C modules.
- Pressing on a transparent panel.
- Driving 3.3 V modules from 5 V logic.
Frequently asked questions
Which library suits SH1106 and SSD1309?
U8g2 supports both and many other OLED chips.
Why is my image shifted?
SH1106 has a wider memory than SSD1306; use the SH1106 driver.
Are colour OLEDs available?
Yes, SSD1351 panels show 262K colours over SPI.
What is a transparent OLED for?
Overlay displays where you can see through the panel.
Do they run on 5 V?
Some do and some are 3.3 V only; check the module.
Parts for this guide
- ₹1,392View
- ₹945View
- ₹1,421View
- ₹2,914View
- ₹4,138View
- ₹426View
- ₹347View
- ₹1,869View
- ₹1,113View
- ₹1,610View
- ₹635View
- ₹1,491View
- ₹377View
- ₹4,178View
- ₹655View
- ₹2,297View
- ₹377View
2.42 inch SPI communication 128x64 resolution ssd1309 driver oled display module - Blue color screen₹1,153View- ₹904View
- ₹406View
- ₹745View
- ₹359View
- ₹389View
- ₹49View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




