Component guide · Beginner · 4 min read
Small I2C OLED Displays

0.49, 0.66, 0.91 and 0.96 Inch SSD1306 and SSD1315 Modules in White, Blue and Yellow-Blue, Grove, ACEBOTT, Waveshare and Crowtail Versions
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are tiny monochrome OLEDs from 0.49 to 0.96 inch that talk over I2C with four wires: VCC, GND, SDA and SCL. They use the SSD1306 or compatible SSD1315 chip, so one library works for all. The I2C address is usually 0x3C. Pick by size (128x64 or 128x32), colour and whether you need a Grove or breadboard connector.
Key specs at a glance
- Sizes
- 0.49, 0.66, 0.91 and 0.96 inch
- Resolution
- 64x32, 128x32 and 128x64
- Chip
- SSD1306 or SSD1315
- Interface
- I2C (some also SPI)
- Supply
- 3.3 V to 5 V on most modules
- Colours
- White, blue and yellow-blue
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 10.96 inch OLED white 1306 display with matrix buttons and 4*4 buttons₹369
Option 20.96 inch OLED white 1315 display with matrix buttons and 4*4 buttons₹332
Option 3GoldenMorning 0.49 inch OLED Display Module 64×32 SSD1315₹171
Option 4GoldenMorning 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE₹228
Option 5GoldenMorning 0.91 inch 128x32 Blue OLED Display Module with I2C/IIC Serial Interface₹231
Option 6Waveshare 0.96 Inch OLED Display (B)₹675
What the Small I2C OLED displays (0.49 to 0.96 inch, SSD1306 and SSD1315) is
OLED pixels make their own light, so there is no backlight and contrast is high. The 0.96 inch 128x64 module is the most common and fits most beginner projects; the 0.91 inch 128x32 is a thin strip for tight spaces; and the 0.49 inch is for very small devices. Yellow-blue modules have a fixed yellow strip at the top and blue below, so layouts should respect that split.
SSD1315 is a pin-compatible update to SSD1306 and works with the same code. Grove versions have a standard connector that plugs into a Grove shield.
Small I2C OLED displays (0.49 to 0.96 inch, SSD1306 and SSD1315) pinout
The pins on the Small I2C OLED displays (0.49 to 0.96 inch, SSD1306 and SSD1315) and what each one does.
| Pin | Function |
|---|---|
| VCC | 3.3 V or 5 V |
| GND | Ground |
| SDA | I2C data |
| SCL | I2C clock |
- VCC
- 3.3 V or 5 V
- GND
- Ground
- SDA
- I2C data
- SCL
- I2C clock
Wiring the Small I2C OLED displays (0.49 to 0.96 inch, SSD1306 and SSD1315)
If nothing shows, scan the bus; the address is 0x3C on most modules and 0x3D on some.
| Small I2C OLED displays (0.49 to 0.96 inch, SSD1306 and SSD1315) pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5V (or 3.3V) | 3V3 |
| GND | GND | GND |
| SDA | A4 | GPIO 21 |
| SCL | A5 | GPIO 22 |
- VCC
- Arduino Uno:
- 5V (or 3.3V)
- ESP32:
- 3V3
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SDA
- Arduino Uno:
- A4
- ESP32:
- GPIO 21
- SCL
- Arduino Uno:
- A5
- ESP32:
- GPIO 22
Example code
Use 128x32 for 0.91 inch displays and 64x32 only with libraries that support the 0.49 inch panel.
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
Adafruit_SSD1306 display(128, 64, &Wire, -1); // use 128x32 for 0.91 inch modules
void setup() {
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // try 0x3D if nothing shows
display.clearDisplay();
display.setTextSize(2);
display.setTextColor(SSD1306_WHITE);
display.setCursor(0, 0);
display.println("Hello");
display.display();
}
void loop() {}Setup and tuning
run an I2C scanner if the display stays blank; 0x3C is common.
set the width and height in the library to match the module.
OLEDs can show image retention; dim or blank the screen when idle.
yellow-blue modules show yellow on the top rows and blue below.
What you need
Shop this list19 of 20 found in our store · ₹7,541
0.96 inch OLED white 1306 display with matrix buttons and 44 buttons: the part this guide covers0.96 inch OLED white 1306 display with matrix buttons and 4*4 buttons₹369
0.96 inch OLED white 1315 display with matrix buttons and 44 buttons: another version this guide covers0.96 inch OLED white 1315 display with matrix buttons and 4*4 buttons₹332
GoldenMorning 0.49 inch OLED Display Module 64×32 SSD1315: another version this guide coversGoldenMorning 0.49 inch OLED Display Module 64×32 SSD1315₹171
GoldenMorning 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE: another version this guide coversGoldenMorning 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE₹228
GoldenMorning 0.91 inch 128x32 Blue OLED Display Module with I2C/IIC Serial Interface: another version this guide covers0.91 inch 128x32 Blue OLED Display Module with I2C/IIC Serial Interface₹188
Waveshare 0.96 Inch OLED Display (B): another version this guide coversWaveshare 0.96 Inch OLED Display (B)₹675
SeeedStudio Grove OLED Display 0.96'': another version this guide coversSeeedStudio Grove OLED Display 0.96''₹1,033
0.96 inch Yellow-Blue OLED Display Module: another version this guide covers0.96 inch Yellow-Blue OLED Display Module₹178
Waveshare 128x32 General 0.91inch OLED Display Module: another version this guide coversWaveshare 128x32 General 0.91inch OLED Display Module₹625
SeeedStudio Grove OLED Yellow&Blue Display 0.96 (SSD1315)V1.1: another version this guide coversSeeedStudio Grove OLED Yellow&Blue Display 0.96 (SSD1315)_V1.1₹725
Waveshare 0.96inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication version C (upper yellow & l: another version this guide coversWaveshare 0.96inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication version C (upper yellow & l₹404
0.96 Inch I2C/IIC 4pin OLED Display Module BLACK: another version this guide covers0.96 Inch I2C/IIC 4pin OLED Display Module BLACK₹198
0.91 Inch Monochrome Oled display Panel (Blue) 14pin: another version this guide covers0.91 Inch Monochrome Oled display Panel (Blue) 14pin₹132
0.66 Inch Monochrome Oled display panel (White): another version this guide covers0.66 Inch Monochrome Oled display panel (White)₹257
0.91 inch 128x32 Blue OLED Display Module with I2C/IIC Serial Interface: another version this guide covers0.91 inch 128x32 Blue OLED Display Module with I2C/IIC Serial Interface₹188
Golden Morning 0.96inch OLED module IIC/I2C 4pin SSD1315 white color GND VDD: another version this guide coversGolden Morning 0.96inch OLED module IIC/I2C 4pin SSD1315 white color GND VDD₹307
Elecrow Crowtail- OLED: another version this guide coversElecrow Crowtail- OLED₹556
ACEBOTT 0.96 Inch OLED LCD Module White Backlight 128X64 Easy-Plug Compatible with ESP32/Arduino: another version this guide coversACEBOTT 0.96 Inch OLED LCD Module White Backlight 128X64 Easy-Plug Compatible with ESP32/Arduino₹586- Uno R3 development board: the controller used in the wiring tableFind this part
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389
Alternatives and when to choose them
- SSD1306 OLED displays: a deeper look at the main chip.
- Larger OLED panels: 1.3 to 3.12 inch panels.
- I2C 16x2 LCDs: bigger text, no graphics.
Common mistakes to avoid
- Wrong I2C address in code.
- Wrong display size in the constructor.
- Leaving the screen on a static image for hours.
- Using a library for the wrong chip.
Frequently asked questions
What is the default I2C address?
0x3C on most modules and 0x3D on a few.
Does SSD1315 work with SSD1306 code?
Yes, it is a compatible chip and uses the same library.
Can I use 5 V?
Most modules have a regulator and accept 3.3 V to 5 V; check yours.
Why is the top yellow?
Yellow-blue modules have a fixed two-colour split.
Can it show graphics?
Yes, the Adafruit GFX library draws lines, shapes and bitmaps.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


