Comparison · Beginner · 3 min read
M5Stack Boards
Core, Stick, Atom and Stamp Compared
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
M5Stack makes ready-to-use ESP32 modules with a case, screen, battery and Grove connectors. Core and CoreS3 have a touch screen, Stick has a small display and battery, Atom is a tiny block, and Stamp is a bare module you solder into your own product. Program them with UIFlow blocks, MicroPython, Arduino or ESP-IDF.
Key specs at a glance
- Core / CoreS3 / Core2
- Touchscreen, speaker, battery base, stackable modules
- Stick
- Compact, built-in display and battery, IMU and mic on some
- Atom / AtomS3
- Tiny 24 mm block with a button and RGB LED, some with screens
- Stamp
- PCB module with castellated pads for custom products
- Chips
- ESP32 or ESP32-S3 depending on the model
- Expansion
- Grove HY2.0 ports, M-Bus pins and plug-in Units
The main families
Choose by size, display and how you will use it.
| Family | Size and display | Good for | Notes |
|---|---|---|---|
| Core / Core2 / CoreS3 | Credit-card size, 2-inch touch screen | Dashboards, control panels, teaching | Battery base and extra modules stack under it |
| Stick (StickC, StickS3) | Small stick, tiny colour screen | Wearables, portable sensors, remotes | IMU, mic and battery in many versions |
| Atom / AtomS3 / AtomS3U | 24 mm cube | Small devices, USB dongles, matrix LEDs | Very small, fewer pins |
| Stamp / StampS3 | PCB module | Products and custom boards | Solder to your own PCB |
| Tab5 and large units | 5-inch touch screen | Large HMIs and apps | ESP32-P4 class chip |
- Core / Core2 / CoreS3
- Size and display:
- Credit-card size, 2-inch touch screen
- Good for:
- Dashboards, control panels, teaching
- Notes:
- Battery base and extra modules stack under it
- Stick (StickC, StickS3)
- Size and display:
- Small stick, tiny colour screen
- Good for:
- Wearables, portable sensors, remotes
- Notes:
- IMU, mic and battery in many versions
- Atom / AtomS3 / AtomS3U
- Size and display:
- 24 mm cube
- Good for:
- Small devices, USB dongles, matrix LEDs
- Notes:
- Very small, fewer pins
- Stamp / StampS3
- Size and display:
- PCB module
- Good for:
- Products and custom boards
- Notes:
- Solder to your own PCB
- Tab5 and large units
- Size and display:
- 5-inch touch screen
- Good for:
- Large HMIs and apps
- Notes:
- ESP32-P4 class chip
Software choices
- UIFlow is a block-based and MicroPython online tool, good for classrooms. - Arduino IDE or PlatformIO with the M5Unified or M5Stack libraries works for most projects. - ESP-IDF gives full control for products. Always pick the correct board in your tool, because pin mappings (for example the display and button pins) differ between models.
Units and expansion
M5Stack sells many Grove-style Units: sensors, relays, encoders and I2C hubs that plug in without soldering. If you need more than one I2C unit, use an I2C hub so addresses do not clash; see I2C. Core modules stack with M-Bus connectors for GPS, LoRa, CAN and more. For compact kits, choose Stick or Atom.
Which should I buy?
1. Learning and classroom: Core2 or CoreS3. 2. Pocket logger or remote: StickS3 or StickC. 3. Small hidden device or USB key: AtomS3U. 4. Your own product: Stamp modules. 5. Large interface: the Tab series. For a bare ESP32 comparison, see the ESP32 variants guide.
Try it: Battery life calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Using a library for the wrong M5 model, so the screen stays blank.
- Powering from a weak USB port while charging and running a heavy load.
- Putting two I2C units with the same address on one port.
- Forgetting to enable the battery or power button setting.
- Buying a Stamp when you wanted a ready case and screen.
Frequently asked questions
Is M5Stack just an ESP32?
Yes, but with a case, screen, battery and standard connectors, so you do not need to solder or design a PCB.
Core2 or CoreS3?
CoreS3 is newer with an ESP32-S3, camera and better features. Core2 is a proven ESP32 board with strong library support.
Can I use Arduino libraries?
Yes. The M5Unified library supports the whole range.
What is a Unit?
A small Grove-compatible module, such as a sensor or relay, that plugs into the Grove port.
Can I run MicroPython?
Yes, UIFlow and MicroPython are supported on most models.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 7 step-by-step builds in our project library use parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




